Professor Marco Viceconti

Professor of Biomechanics

Department of Mechanical Engineering
Sir Frederick Mappin Building
Mappin Street
Sheffield
S1 3JD
UK

Telephone: +44 (0) 114 222 7788
Fax: +44 (0) 114 222 7890

Profile

Marco Viceconti is full Professor of Biomechanics at the Department of Mechanical Engineering at the University of Sheffield and Professor Associate at the Department of Human Metabolism. He is currently serving as Scientific Director of the Insigneo Institute of in silico medicine, a joint initiative between the University of Sheffield and the Sheffield Teaching Hospital NHS Foundation Trust. Before this he was the Technical Director of the Medical Technology Lab at the Rizzoli Orthopaedic Institute in Bologna, Italy.

Prof. Viceconti has a Mechanical Engineering degree from the University of Bologna and a PhD from the University of Firenze. He started his research career under the guidance of Prof Alì Seireg, first at the University of Florida-Gainesville, and then at the University of Wisconsin-Madison.

His main research interests are related to the development and validation of medical technology, especially that involving simulation, and primarily in relation to neuromusculoskeletal diseases. He has published over 200 papers, mostly indexed in Medline, and serves as reviewer for many international funding agencies and peer-reviewed journals.

Marco Viceconti is one of the key figures in the emerging Virtual Physiological Human (VPH) community. Co-author of the first white paper on VPH, scientific co-ordinator of the seminal VPH research roadmap, "VPH ambassador" for the VPH Network of Excellence, Co-ordinator of the VPHOP integrated project, he is also currently chairing the Board of Directors of the VPH Institute.

Other Professional Activities and Achievements

Chartered Engineering with the Italian Professional Order of Engineers
President of the European Society of Biomechanics, 2006-2008
President of European Alliance for Medical and Biological Engineering and Science, 2010-2013
Executive Director, Virtual Physiological Human Institute for Integrative Biomedical Research

Research Interests

Biomechanics of the neuromusculoskeletal system
Virtual Physiological Human and in silico medicine
Technology for health

Teaching

Although Prof Viceconti is not currently involved in any formal teaching activity, throughout the 2011-12 academic year he will provide a number of seminars for students and researchers.

Current Research Grants

Year	Source	Grant Type	Title	Code
2008-2012	European Commission	ICT eHealth FP7	VPHOP: The Osteoporotic Virtual Physiological Human	FP7-ICT-2008-223865
2009-2012	European Commission	ICT eHealth FP7	VPH NoE: Virtual Physiological Human Network of Excellence	FP7-ICT-2008-223920
2010-2012	European Commission	ICT eHealth FP7	NMS Physiome: Tools to Develop the NeuroMusculoSkeletal Physiome	FP7-ICT-2010-248189
2010-2013	European Commission	ICT eHealth FP7	Discipulus: Digitally Integrated Scientific Data for Patients and Populations in User-Specific Simulations	FP7-ICT-2011-288143
2013-2015	NC3Rs	Standard Proposal	Development of Computational models of Bone Formation and Resorption to Predict Changes in Bone in Preclinical Intervention Studies	NC/K000780/1
2013-2018	EPSRC	Frontier	Modelling Complex and Partially Identified Engineering Problems - Application to the Individualised Multi-Scale Simulation of the Musculoskeletal System	EP/K03877X/1

Journal articles

Coveney PV, Diaz-Zuccarini V, Graf N, Hunter P, Kohl P, Tegner J & Viceconti M (2013) Integrative approaches to computational biomedicine. INTERFACE FOCUS, 3(2).
Hunter P, Chapman T, Coveney PV, de Bono B, Diaz V, Fenner J, Frangi AF, Harris P, Hose R, Kohl P, Lawford P, McCormack K, Mendes M, Omholt S, Quarteroni A, Shublaq N, Skar J, Stroetmann K, Tegner J, Thomas SR, Tollis I, Tsamardinos I, van Beek JHGM & Viceconti M (2013) A vision and strategy for the virtual physiological human: 2012 update. INTERFACE FOCUS, 3(2).
Ohman C, Zwierzak I, Baleani M & Viceconti M (2013) Human bone hardness seems to depend on tissue type but not on anatomical site in the long bones of an old subject.. Proc Inst Mech Eng H, 227(2), 200-206.
Thiel R, Stroetmann KA & Viceconti M (2013) Towards Assessing The Socio-Economic Impact of VPH Models.. Stud Health Technol Inform, 183, 382.
Juszczyk MM, Cristofolini L, Zani L, Schileo E, Viceconti M & Salvà M (2013) Accurate in vitro identification of fracture onset in bones: Failure mechanism of the proximal human femur. Journal of Biomechanics, 46(1), 158-164.
Ihaddadene N, Bouzid S, Erani P, Cotifava M, Tomei F, Baleani M, Viceconti M & Cristofolini L (2012) Fatigue-fractured surfaces of commercial bone cements. Computer Methods in Biomechanics and Biomedical Engineering, 10(SUPPL. 1), 157-158.
Juszczyk MM, Cristofolini L, Zani L, Schileo E, Viceconti M & Salvà M (2012) Accurate in vitro identification of fracture onset in bones: Failure mechanism of the proximal human femur. Journal of Biomechanics.
Danesi V, Cristofolini L, Juszczyk MM, Erani P & Viceconti M (2012) Mechanical properties of the human metatarsal bones. Journal of Mechanics in Medicine and Biology, 12(4).
Liò P, Paoletti N, Moni MA, Atwell K, Merelli E & Viceconti M (2012) Modelling osteomyelitis.. BMC Bioinformatics, 13 Suppl 14, S12.
Paoletti N, Liò P, Merelli E & Viceconti M (2012) Multilevel computational modeling and quantitative analysis of bone remodeling.. IEEE/ACM Trans Comput Biol Bioinform, 9(5), 1366-1378.
Cristofolini L, Erani P & Viceconti M (2012) Comments on 'Experimental versus computational analysis of micromotions at the implant-bone interface'.. Proc Inst Mech Eng H, 226(5), 417-419.
Particelli F, Mecozzi L, Beraudi A, Montesi M, Baruffaldi F & Viceconti M (2012) A comparison between micro-CT and histology for the evaluation of cortical bone: Effect of polymethylmethacrylate embedding on structural parameters. Journal of Microscopy, 245(3), 302-310.
Grassi L, Taddei F, Zani L, Juszczyk M, Cristofolini L, Viceconti M & Schileo E (2012) Accuracy of finite element predictions in sideways load configurations for the proximal human femur. Journal of Biomechanics, 45(2), 394-399.
Viceconti M, Taddei F, Cristofolini L, Martelli S, Falcinelli C & Schileo E (2012) Are spontaneous fractures possible? An example of clinical application for personalised, multiscale neuro-musculo-skeletal modelling. Journal of Biomechanics, 45(3), 421-426.
Taddei F, Martelli S, Valente G, Viceconti M, Leardini A, Benedetti MG & Manfrini M (2012) Femoral loads during gait in a patient with massive skeletal reconstruction. Clinical Biomechanics, 27(3), 273-280.
Bialoblocka-Juszczyk E, Cristofolini L, Erani P & Viceconti M (2012) Method to analyze the fatigue cracks in acrylic bone cement. Journal of Mechanics in Medicine and Biology, 12(1).
Valente G, Martelli S, Taddei F, Farinella G & Viceconti M (2012) Muscle discretization affects the loading transferred to bones in lower-limb musculoskeletal models. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 226(H2), 161-169.
Kohout J, Clapworthy GJ, Martelli S & Viceconti M (2012) Muscle fibres modelling. GRAPP 2012 IVAPP 2012 - Proceedings of the International Conference on Computer Graphics Theory and Applications and International Conference on Information Visualization Theory and Applications, 58-66.
Zhao X, Liu E, Clapworthy GJ, Viceconti M & Testi D (2012) SOA-based digital library services and composition in biomedical applications. Computer Methods and Programs in Biomedicine, 106(3), 219-233.
Viceconti M, Taddei F, Cristofolini L, Martelli S, Falcinelli C & Schileo E (2012) Are spontaneous fractures possible? An example of clinical application for personalised, multiscale neuro-musculo-skeletal modelling.. J Biomech, 45(3), 421-426.
Particelli F, Mecozzi L, Beraudi A, Montesi M, Baruffaldi F & Viceconti M (2012) A comparison between micro-CT and histology for the evaluation of cortical bone: effect of polymethylmethacrylate embedding on structural parameters.. J Microsc, 245(3), 302-310.
Grassi L, Schileo E, Taddei F, Zani L, Juszczyk M, Cristofolini L & Viceconti M (2012) Accuracy of finite element predictions in sideways load configurations for the proximal human femur.. J Biomech, 45(2), 394-399.
Taddei F, Martelli S, Valente G, Leardini A, Benedetti MG, Manfrini M & Viceconti M (2012) Femoral loads during gait in a patient with massive skeletal reconstruction.. Clin Biomech (Bristol, Avon), 27(3), 273-280.
Martelli S, Taddei F, Schileo E, Cristofolini L, Rushton N & Viceconti M (2012) Biomechanical robustness of a new proximal epiphyseal hip replacement to patient variability and surgical uncertainties: a FE study.. Med Eng Phys, 34(2), 161-171.
Zhao X, Liu E, Clapworthy GJ, Viceconti M & Testi D (2012) SOA-based digital library services and composition in biomedical applications.. Comput Methods Programs Biomed, 106(3), 219-233.
Viceconti M (2011) A tentative taxonomy for predictive models in relation to their falsifiability.. Philos Trans A Math Phys Eng Sci, 369(1954), 4149-4161.
Harman MK, Baleani M, Juda K & Viceconti M (2011) Repeatable procedure for evaluating taper damage on femoral stems with modular necks.. J Biomed Mater Res B Appl Biomater, 99(2), 431-439.
Juszczyk MM, Cristofolini L & Viceconti M (2011) The human proximal femur behaves linearly elastic up to failure under physiological loading conditions.. J Biomech, 44(12), 2259-2266.
Martelli S, Taddei F, Cristofolini L, Schileo E, Rushton N & Viceconti M (2011) A new hip epiphyseal prosthesis: design revision driven by a validated numerical procedure.. Med Eng Phys, 33(10), 1203-1211.
Cristofolini L, Juszczyk M, Taddei F, Field RE, Rushton N & Viceconti M (2011) Assessment of femoral neck fracture risk for a novel proximal epiphyseal hip prosthesis.. Clin Biomech (Bristol, Avon), 26(6), 585-591.
Tassani S, Particelli F, Perilli E, Traina F, Baruffaldi F & Viceconti M (2011) Dependence of trabecular structure on bone quantity: a comparison between osteoarthritic and non-pathological bone.. Clin Biomech (Bristol, Avon), 26(6), 632-639.
Coveney PV, Diaz V, Hunter P, Kohl P & Viceconti M (2011) The Virtual Physiological Human. INTERFACE FOCUS, 1(3), 281-285.
Martelli S, Taddei F, Cappello A, van Sint Jan S, Leardini A & Viceconti M (2011) Effect of sub-optimal neuromotor control on the hip joint load during level walking.. J Biomech, 44(9), 1716-1721.
Viceconti M, Clapworthy G, Testi D, Taddei F & McFarlane N (2011) Multimodal fusion of biomedical data at different temporal and dimensional scales.. Comput Methods Programs Biomed, 102(3), 227-237.
Dall'Ara E, Ohman C, Baleani M & Viceconti M (2011) Reduced tissue hardness of trabecular bone is associated with severe osteoarthritis.. J Biomech, 44(8), 1593-1598.
Harman M, Cristofolini L, Erani P, Stea S & Viceconti M (2011) A pictographic atlas for classifying damage modes on polyethylene bearings.. J Mater Sci Mater Med, 22(5), 1137-1146.
Baleani M & Viceconti M (2011) The effect of adding 10% of barium sulphate radiopacifier on the mechanical behaviour of acrylic bone cement. FATIGUE FRACT ENG M, 34(5), 374-382.
Danesi V, Cristofolini L, Stea S, Traina F, Beraudi A, Tersi L, Harman M & Viceconti M (2011) Re-use of explanted osteosynthesis devices: a reliable and inexpensive reprocessing protocol.. Injury, 42(10), 1101-1106.
Martelli S, Taddei F, Cristofolini L, Gill HS & Viceconti M (2011) Extensive risk analysis of mechanical failure for an epiphyseal hip prothesis: a combined numerical-experimental approach.. Proc Inst Mech Eng H, 225(2), 126-140.
Ohman C, Espino DM, Heinmann T, Baleani M, Delingette H & Viceconti M (2011) Subject-specific knee joint model: Design of an experiment to validate a multi-body finite element model. VISUAL COMPUT, 27(2), 153-159.
Tassani S, Ohman C, Baruffaldi F, Baleani M & Viceconti M (2011) Volume to density relation in adult human bone tissue.. J Biomech, 44(1), 103-108.
Liò P, Merelli E, Paoletti N & Viceconti M (2011) A combined process algebraic and stochastic approach to bone remodeling. Electronic Notes in Theoretical Computer Science, 277(1), 41-52.
Martelli S, Taddei F, Cristofolini L, Schileo E, Rushton N & Viceconti M (2011) A new hip epiphyseal prosthesis: Design revision driven by a validated numerical procedure. Medical Engineering and Physics.
Thiel R, Viceconti M & Stroetmann K (2011) Assessing biocomputational modelling in transforming clinical guidelines for osteoporosis management.. Stud Health Technol Inform, 169, 432-436.
Martelli S, Taddei F, Schileo E, Cristofolini L, Rushton N & Viceconti M (2011) Biomechanical robustness of a new proximal epiphyseal hip replacement to patient variability and surgical uncertainties: A FE study. Medical Engineering and Physics.
Viceconti M (2011) Collaborative modeling and simulation: The virtual physiological human vision. Proceedings of the 2011 20th IEEE International Workshops on Enabling Technologies: Infrastructure for Collaborative Enterprises, WETICE 2011, 229-234.
Öhman C, Pani C, Taddei F, Alberghini M, Baleani M, Viceconti M & Manfrini M (2011) Compressive behaviour of child and adult cortical bone. Bone, 49(4), 769-776.
Grassi L, Hraiech N, Schileo E, Ansaloni M, Rochette M & Viceconti M (2011) Evaluation of the generality and accuracy of a new mesh morphing procedure for the human femur.. Med Eng Phys, 33(1), 112-120.
Martelli S, Taddei F, Cristofolini L, Gill HS & Viceconti M (2011) Extensive risk analysis of mechanical failure for an epiphyseal hip prothesis: a combined numerical-experimental approach. P I MECH ENG H, 225(H2), 126-140.
Paoletti N, Merelli E, Liò P & Viceconti M (2011) Osteoporosis: A multiscale modeling viewpoint. Proceedings of the 9th International Conference on Computational Methods in Systems Biology, CMSB'11, 183-193.
Viceconti M & McCulloch AD (2011) Policy needs and options for a common approach towards modelling and simulation of human physiology and diseases with a focus on the virtual physiological human.. Stud Health Technol Inform, 170, 49-82.
Harman MK, Baleani M, Juda K & Viceconti M (2011) Repeatable procedure for evaluating taper damage on femoral stems with modular necks. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 99 B(2), 431-439.
Cristofolini L, Erani P, Bialoblocka-Juszczyk E, Ohashi H, Iida S, Minato I & Viceconti M (2010) Effect of undersizing on the long-term stability of the Exeter hip stem: A comparative in vitro study.. Clin Biomech (Bristol, Avon), 25(9), 899-908.
Harman MK, Schmitt S, Rössing S, Banks SA, Sharf HP, Viceconti M & Hodge WA (2010) Polyethylene damage and deformation on fixed-bearing, non-conforming unicondylar knee replacements corresponding to progressive changes in alignment and fixation.. Clin Biomech (Bristol, Avon), 25(6), 570-575.
Testi D, Quadrani P & Viceconti M (2010) PhysiomeSpace: digital library service for biomedical data.. Philos Trans A Math Phys Eng Sci, 368(1921), 2853-2861.
Kohl P & Viceconti M (2010) The virtual physiological human: computer simulation for integrative biomedicine II.. Philos Trans A Math Phys Eng Sci, 368(1921), 2837-2839.
Cristofolini L, Schileo E, Juszczyk M, Taddei F, Martelli S & Viceconti M (2010) Mechanical testing of bones: the positive synergy of finite-element models and in vitro experiments.. Philos Trans A Math Phys Eng Sci, 368(1920), 2725-2763.
Viceconti M & Kohl P (2010) The virtual physiological human: computer simulation for integrative biomedicine I.. Philos Trans A Math Phys Eng Sci, 368(1920), 2591-2594.
Juszczyk M, Schileo E, Martelli S, Cristofolini L & Viceconti M (2010) A Method to Improve Experimental Validation of Finite-Element Models of Long Bones. STRAIN, 46(3), 242-251.
Spinelli M, Affatato S, Cristofolini L, Erani P, Tigani D & Viceconti M (2010) Combined wear behavior and long-term implant-bone fixation of total knee replacement: a novel in vitro set-up.. Artif Organs, 34(5), E177-E183.
Stoico R, Tassani S, Perilli E, Baruffaldi F & Viceconti M (2010) Quality control protocol for in vitro micro-computed tomography.. J Microsc, 238(2), 162-172.
Tassani S, Ohman C, Baleani M, Baruffaldi F & Viceconti M (2010) Anisotropy and inhomogeneity of the trabecular structure can describe the mechanical strength of osteoarthritic cancellous bone.. J Biomech, 43(6), 1160-1166.
Cristofolini L, Conti G, Juszczyk M, Cremonini S, Van Sint Jan S & Viceconti M (2010) Structural behaviour and strain distribution of the long bones of the human lower limbs.. J Biomech, 43(5), 826-835.
Baleani M, Bialoblocka-Juszczyk E, Engels GE & Viceconti M (2010) The effect of vacuum mixing and pre-heating the femoral component on the mechanical properties of the cement mantle.. J Bone Joint Surg Br, 92(3), 454-460.
Taddei F, Martelli S, Gill HS, Cristofolini L & Viceconti M (2010) Finite element modeling of resurfacing hip prosthesis: estimation of accuracy through experimental validation.. J Biomech Eng, 132(2), 021002.
Juszczyk M, Cristofolini L, Kaniuk J, Schileo E & Viceconti M (2010) A novel method for determining the time and location of abrupt fracture initiation in bones. J STRAIN ANAL ENG, 45(7), 481-493.
Petrolo L, Testi D, Taddei F & Viceconti M (2010) Effect of a virtual reality interface on the learning curve and on the accuracy of a surgical planner for total hip replacement.. Comput Methods Programs Biomed, 97(1), 86-91.
Bialoblocka-Juszczyk E, Cristofolini L, Erani P & Viceconti M (2010) Effect of long-term physiological activity on the long-term stem stability of cemented hip arthroplasty: in vitro comparison of three commercial bone cements. P I MECH ENG H, 224(H1), 53-65.
Bialoblocka-Juszczyk E, Cristofolini L, Erani P & Viceconti M (2010) Effect of long-term physiological activity on the long-term stem stability of cemented hip arthroplasty: in vitro comparison of three commercial bone cements.. Proc Inst Mech Eng H, 224(1), 53-65.
Agrawal A, Kohout J, Clapworthy GJ, McFarlane NJB, Dong F, Viceconti M, Taddei F & Testi D (2010) Enabling the interactive display of large medical volume datasets by multiresolution bricking. J SUPERCOMPUT, 51(1), 3-19.
Spinelli M, Affatato S, Tiberi L, Carmignato S & Viceconti M (2010) Integrated friction measurements in hip wear simulations: short-term results. P I MECH ENG H, 224(H7), 865-876.
Spinelli M, Affatato S, Tiberi L, Carmignato S & Viceconti M (2010) Integrated friction measurements in hip wear simulations: short-term results.. Proc Inst Mech Eng H, 224(7), 865-876.
Zhao Y, Clapworthy GJ, Dong F, Zhang X, Chen W & Viceconti M (2010) iVolBrush: An intelligent interactive tool for efficient volume selection and editing. ACM International Conference Proceeding Series, 231-235.
Affatato S, Zavalloni M, Spinelli M, Costa L, Bracco P & Viceconti M (2010) Long-term in-vitro wear performance of an innovative thermo-compressed cross-linked polyethylene. TRIBOL INT, 43(1-2), 22-28.
Beraudi A, Stea S, Bordini B, Baleani M & Viceconti M (2010) Osteon classification in human fibular shaft by circularly polarized light.. Cells Tissues Organs, 191(3), 260-268.
Viceconti M, Schileo E, Taddei F, Martelli S & Testi D (2010) Personalised multiscale models for risk fracture prediction. Osteoporosis International, 21(6), 1067-1071.
Affatato S, Traina F, Mazzega-Fabbro C, Sergo V & Viceconti M (2009) Is ceramic-on-ceramic squeaking phenomenon reproducible in vitro? A long-term simulator study under severe conditions.. J Biomed Mater Res B Appl Biomater, 91(1), 264-271.
Viceconti M, Taddei F & Schileo E (2009) Letter to the editor commenting on "Multilevel finite element modeling for the prediction of local cellular deformation in bone," Deligianni DD and Apostolopoulos CA (2008) Biomech Model Mechanobiol 7(2):151-159.. Biomech Model Mechanobiol, 8(5), 427-428.
Zwierzak I, Baleani M & Viceconti M (2009) Microindentation on cortical human bone: effects of tissue condition and indentation location on hardness values.. Proc Inst Mech Eng H, 223(7), 913-918.
Affatato S, Taddei P, Leardini A, Giannini S, Spinelli M & Viceconti M (2009) Wear behaviour in total ankle replacement: a comparison between an in vitro simulation and retrieved prostheses.. Clin Biomech (Bristol, Avon), 24(8), 661-669.
Jedenmalm A, Affatato S, Taddei P, Leardini W, Gedde UW, Fagnano C & Viceconti M (2009) Effect of head surface roughness and sterilization on wear of UHMWPE acetabular cups.. J Biomed Mater Res A, 90(4), 1032-1042.
Taddei F, Balestri M, Rimondi E, Viceconti M & Manfrini M (2009) Tibia adaptation after fibula harvesting: an in vivo quantitative study.. Clin Orthop Relat Res, 467(8), 2149-2158.
Bialoblocka-Juszczyk E, Baleani M, Cristofolini L & Viceconti M (2009) Effect of stem preheating on the fatigue behaviour of bone cement around hip prostheses. P I MECH ENG H, 223(H5), 637-641.
Bialoblocka-Juszczyk E, Baleani M, Cristofolini L & Viceconti M (2009) Effect of stem preheating on the fatigue behaviour of bone cement around hip prostheses.. Proc Inst Mech Eng H, 223(5), 637-641.
Cristofolini L & Viceconti M (2009) Comments on "In vitro analysis of Exeter stem torsional stability" by Bell CG, Weinrauch P, Pearcy M, Crawford R, published on J Arthroplasty. 2007 Oct;22(7):1024-30.. J Arthroplasty, 24(4), 657-659.
Helgason B, Pálsson H, Rúnarsson TP, Frossard L & Viceconti M (2009) Risk of failure during gait for direct skeletal attachment of a femoral prosthesis: a finite element study.. Med Eng Phys, 31(5), 595-600.
Cristofolini L, Juszczyk M, Taddei F & Viceconti M (2009) Strain distribution in the proximal human femoral metaphysis. P I MECH ENG H, 223(H3), 273-288.
Cristofolini L, Juszczyk M, Taddei F & Viceconti M (2009) Strain distribution in the proximal human femoral metaphysis.. Proc Inst Mech Eng H, 223(3), 273-288.
Cristofolini L, Affatato S, Erani P, Tigani D & Viceconti M (2009) Implant fixation in knee replacement: preliminary in vitro comparison of ceramic and metal cemented femoral components.. Knee, 16(2), 101-108.
Stoico R, Tassani S, Baruffaldi F, Viceconti M & Perilli E (2009) Accuracy test for in-vitro micro-computed tomography. IFMBE Proceedings, 25(4), 410-413.
Spinelli M, Affatat S, Corvil A & Viceconti M (2009) Ceramic-on-ceramic vs. metal-on-metal in total hip arthroplasty (THA): do 36-mm diameters exhibit comparable wear performance?. MATERIALWISS WERKST, 40(1-2), 94-97.
Thiel R, Stroetmann KA, Stroetmann VN & Viceconti M (2009) Designing a socio-economic assessment method for integrative biomedical research: the Osteoporotic Virtual Physiological Human project.. Stud Health Technol Inform, 150, 876-880.
Viceconti M (2009) EURO PHYSIOME AND THE LIVING HUMAN DIGITAL LIBRARY PROJECT. J PHYSIOL SCI, 59, 46-46.
Öhman C, Tassani S, Perilli E, Baruffaldi F, Baleani M & Viceconti M (2009) Osteoarthritic cancellous bone seems to orientate its structure to compensate for tissue degeneration. IFMBE Proceedings, 25(4), 1389-1391.
Viceconti M, Affatato S, Baleani M, Bordini B, Cristofolini L & Taddei F (2009) Pre-clinical validation of joint prostheses: a systematic approach.. J Mech Behav Biomed Mater, 2(1), 120-127.
Bordini B, Stea S, Cremonini S, Viceconti M, De Palma R & Toni A (2009) Relationship between obesity and early failure of total knee prostheses.. BMC Musculoskelet Disord, 10, 29.
Ohman C, Baleani M & Viceconti M (2009) Repeatability of experimental procedures to determine mechanical behaviour of ligaments.. Acta Bioeng Biomech, 11(1), 19-23.
Cristofolini L, Juszczyk M, Taddei F, Field RE, Rushton N & Viceconti M (2009) Stress shielding and stress concentration of contemporary epiphyseal hip prostheses. P I MECH ENG H, 223(H1), 27-44.
Cristofolini L, Juszczyk M, Taddei F, Field RE, Rushton N & Viceconti M (2009) Stress shielding and stress concentration of contemporary epiphyseal hip prostheses.. Proc Inst Mech Eng H, 223(1), 27-44.
Bialoblocka-Juszczyk E, Baleani M & Viceconti M (2008) Effect of hip stem pre-heating on the fatigue strength of bone cement. 8th World Biomaterials Congress 2008, 1, 88-88.
Conti G, Cristofolini L, Juszczyk M, Leardini A & Viceconti M (2008) Comparison of three standard anatomical reference frames for the tibia-fibula complex.. J Biomech, 41(16), 3384-3389.
Affatato S, Cristofolini L, Leardini W, Erani P, Zavalloni M, Tigani D & Viceconti M (2008) A new method of in vitro wear assessment of the UHMWPE tibial insert in total knee replacement.. Artif Organs, 32(12), 942-948.
Hunter P, Kurachi Y, Noble D & Viceconti M (2008) Meeting Report on the 2nd MEI International Symposium - The Worldwide Challenge to Physiome and Systems Biology and Osaka Accord -.. J Physiol Sci, 58(7), 425-431.
Ohman C, Dall'Ara E, Baleani M, Van Sint Jan S & Viceconti M (2008) The effects of embalming using a 4% formalin solution on the compressive mechanical properties of human cortical bone.. Clin Biomech (Bristol, Avon), 23(10), 1294-1298.
Viceconti M, Clapworthy G & Van Sint Jan S (2008) The Virtual Physiological Human - a European initiative for in silico human modelling -.. J Physiol Sci, 58(7), 441-446.
Affatato S, Spinelli M, Zavalloni M, Mazzega-Fabbro C & Viceconti M (2008) Tribology and total hip joint replacement: current concepts in mechanical simulation.. Med Eng Phys, 30(10), 1305-1317.
Schileo E, Dall'Ara E, Taddei F, Malandrino A, Schotkamp T, Baleani M & Viceconti M (2008) An accurate estimation of bone density improves the accuracy of subject-specific finite element (vol 41, pg 2483, 2008). J BIOMECH, 41(15), 3294-3294.
Taddei F, Pani M, Zovatto L, Tonti E & Viceconti M (2008) A new meshless approach for subject-specific strain prediction in long bones: Evaluation of accuracy.. Clin Biomech (Bristol, Avon), 23(9), 1192-1199.
Affatato S, Spinelli M, Zavalloni M, Carmignato S, Lopomo N, Marcacci M & Viceconti M (2008) Unicompartmental knee prostheses: in vitro wear assessment of the menisci tibial insert after two different fixation methods.. Phys Med Biol, 53(19), 5357-5369.
Cristofolini L, Taddei F, Baleani M, Baruffaldi F, Stea S & Viceconti M (2008) Multiscale investigation of the functional properties of the human femur.. Philos Trans A Math Phys Eng Sci, 366(1879), 3319-3341.
Kohl P, Coveney P, Clapworthy G & Viceconti M (2008) The virtual physiological human. Editorial.. Philos Trans A Math Phys Eng Sci, 366(1879), 3223-3224.
Fenner JW, Brook B, Clapworthy G, Coveney PV, Feipel V, Gregersen H, Hose DR, Kohl P, Lawford P, McCormack KM, Pinney D, Thomas SR, Van Sint Jan S, Waters S & Viceconti M (2008) The EuroPhysiome, STEP and a roadmap for the virtual physiological human.. Philos Trans A Math Phys Eng Sci, 366(1878), 2979-2999.
Clapworthy G, Viceconti M, Coveney PV & Kohl P (2008) The virtual physiological human: building a framework for computational biomedicine I. Editorial.. Philos Trans A Math Phys Eng Sci, 366(1878), 2975-2978.
Schileo E, Dall'ara E, Taddei F, Malandrino A, Schotkamp T, Baleani M & Viceconti M (2008) An accurate estimation of bone density improves the accuracy of subject-specific finite element models.. J Biomech, 41(11), 2483-2491.
Affatato S, Zavalloni M, Taddei P, Di Foggia M, Fagnano C & Viceconti M (2008) Comparative study on the wear behaviour of different conventional and cross-linked polyethylenes for total hip replacement. TRIBOL INT, 41(8), 813-822.
Viceconti M, Taddei F, Van Sint Jan S, Leardini A, Cristofolini L, Stea S, Baruffaldi F & Baleani M (2008) Multiscale modelling of the skeleton for the prediction of the risk of fracture.. Clin Biomech (Bristol, Avon), 23(7), 845-852.
Affatato S, Spinelli M, Zavalloni M, Leardini W & Viceconti M (2008) Predictive role of the Lambda ratio in the evaluation of metal-on-metal total hip replacement. P I MECH ENG H, 222(H5), 617-628.
Affatato S, Spinelli M, Zavalloni M, Leardini W & Viceconti M (2008) Predictive role of the lambda ratio in the evaluation of metal-on-metal total hip replacement.. Proc Inst Mech Eng H, 222(5), 617-628.
Reggiani B, Cristofolini L, Taddei F & Viceconti M (2008) Sensitivity of the primary stability of a cementless hip stem to its position and orientation.. Artif Organs, 32(7), 555-560.
Helgason B, Taddei F, Pálsson H, Schileo E, Cristofolini L, Viceconti M & Brynjólfsson S (2008) A modified method for assigning material properties to FE models of bones.. Med Eng Phys, 30(4), 444-453.
Varini E, Cristofolini L, Traina F, Viceconti M & Toni A (2008) Can the rasp be used to predict intra-operatively the primary stability that can be achieved by press-fitting the stem in cementless hip arthroplasty?. Clin Biomech (Bristol, Avon), 23(4), 408-414.
Cristofolini L, Erani P, Savigni P, Grupp T, Thies O & Viceconti M (2008) Thin cement mantles surrounding femoral hip implants might not be deleterious in all cases - Reply. CLIN BIOMECH, 23(4), 501-503.
Cristofolini L, Affatato S, Erani P, Leardini W, Tigani D & Viceconti M (2008) Long-term implant-bone fixation of the femoral component in total knee replacement. P I MECH ENG H, 222(H3), 319-331.
Cristofolini L, Affatato S, Erani P, Leardini W, Tigani D & Viceconti M (2008) Long-term implant-bone fixation of the femoral component in total knee replacement.. Proc Inst Mech Eng H, 222(3), 319-331.
Taddei P, Affatato S, Rocchi M, Fagnano C & Viceconti M (2008) The effects of irradiation and EtO-treatment on ultrahigh molecular weight polyethylene acetabular cups following accelerated aging: Degradation of mechanical properties and morphology changes during hip simulator tests. J MOL STRUCT, 875(1-3), 254-263.
Helgason B, Perilli E, Schileo E, Taddei F, Brynjólfsson S & Viceconti M (2008) Mathematical relationships between bone density and mechanical properties: a literature review.. Clin Biomech (Bristol, Avon), 23(2), 135-146.
Schileo E, Dall'Ara E, Taddei F, Malandrino A, Schotkamp T, Baleani M & Viceconti M (2008) Corrigendum to "An accurate estimation of bone density improves the accuracy of subject-specific finite element" [J. Biomech. 41 (2008) 2483-2491] (DOI:10.1016/j.jbiomech.2008.05.017). Journal of Biomechanics, 41(15), 3294-3294.
Perilli E, Baleani M, Ohman C, Fognani R, Baruffaldi F & Viceconti M (2008) Dependence of mechanical compressive strength on local variations in microarchitecture in cancellous bone of proximal human femur.. J Biomech, 41(2), 438-446.
Bialoblocka-Juszczyk E, Baleani M, Cristofolini L & Viceconti M (2008) Fracture properties of an acrylic bone cement.. Acta Bioeng Biomech, 10(1), 21-26.
Affatato S, Leardini W, Rocchi M, Toni A & Viceconti M (2008) Investigation on wear of knee prostheses under fixed kinematic conditions.. Artif Organs, 32(1), 13-18.
Stea S, Bordini B, Viceconti M, Traina F, Cervini A & Toni A (2008) Is laterality associated with a higher rate of hip arthroplasty on the dominant side?. Artif Organs, 32(1), 73-77.
Cristofolini L, Erani P, Savigni P, Grupp T, Thies O & Viceconti M (2008) Letter to the Editor. Clinical Biomechanics, 23(4), 501-503.
Helgason B, Viceconti M, Rúnarsson TP & Brynjólfsson S (2008) On the mechanical stability of porous coated press fit titanium implants: a finite element study of a pushout test.. J Biomech, 41(8), 1675-1681.
Kohl P, Coveney P, Clapworthy G & Viceconti M (2008) Philosophical Transactions of the Royal Society A: Editorial. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 366(1879), 3223-3224.
Clapworthy G, Viceconti M, Coveney PV & Kohl P (2008) Philosophical Transactions of the Royal Society: Editorial. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 366(1878), 2975-2978.
Schileo E, Taddei F, Cristofolini L & Viceconti M (2008) Subject-specific finite element models implementing a maximum principal strain criterion are able to estimate failure risk and fracture location on human femurs tested in vitro.. J Biomech, 41(2), 356-367.
Cristofolini L, Varini E & Viceconti M (2007) In-vitro method for assessing femoral implant-bone micromotions in resurfacing hip implants under different loading conditions. P I MECH ENG H, 221(H8), 943-950.
Cristofolini L, Varini E & Viceconti M (2007) In-vitro method for assessing femoral implant-bone micromotions in resurfacing hip implants under different loading conditions.. Proc Inst Mech Eng H, 221(8), 943-950.
Perilli E, Baleani M, Ohman C, Baruffaldi F & Viceconti M (2007) Structural parameters and mechanical strength of cancellous bone in the femoral head in osteoarthritis do not depend on age.. Bone, 41(5), 760-768.
Taddei F, Schileo E, Helgason B, Cristofolini L & Viceconti M (2007) The material mapping strategy influences the accuracy of CT-based finite element models of bones: an evaluation against experimental measurements.. Med Eng Phys, 29(9), 973-979.
Erani P, Cristofolini L, Baleani M, Bignozzi MC, Cotifava M, Ihaddadene N, Tomei F & Viceconti M (2007) Quantitative crack surface morphology of bone cements in relation to propagation rate. FATIGUE FRACT ENG M, 30(9), 783-795.
Taddei F, Ansaloni M, Testi D & Viceconti M (2007) Virtual palpation of skeletal landmarks with multimodal display interfaces.. Med Inform Internet Med, 32(3), 191-198.
Viceconti M, Taddei F, Montanari L, Testi D, Leardini A, Clapworthy G & Van Sint Jan S (2007) Multimod Data Manager: a tool for data fusion.. Comput Methods Programs Biomed, 87(2), 148-159.
Cristofolini L, Teutonico AS, Savigni P, Erani P & Viceconti M (2007) Preclinical assessment of the long-term endurance of cemented hip stems. Part 1: effect of daily activities a comparison of two load histories. P I MECH ENG H, 221(H6), 569-584.
Cristofolini L, Saponara TA, Savigni P, Erani P & Viceconti M (2007) Preclinical assessment of the long-term endurance of cemented hip stems. Part 1: effect of daily activities--a comparison of two load histories.. Proc Inst Mech Eng H, 221(6), 569-584.
Cristofolini L, Erani P, Savigni P, Bordini B & Viceconti M (2007) Preclinical assessment of the long-term endurance of cemented hip stems. Part 2: in-vitro and ex-vivo fatigue damage of the cement mantle. P I MECH ENG H, 221(H6), 585-599.
Cristofolini L, Erani P, Savigni P, Bordini B & Viceconti M (2007) Preclinical assessment of the long-term endurance of cemented hip stems. Part 2: in-vitro and ex-vivo fatigue damage of the cement mantle.. Proc Inst Mech Eng H, 221(6), 585-599.
Rocchi M, Affatato S, Falasca G & Viceconti M (2007) Thermomechanical analysis of ultra-high molecular weight polyethylene-metal hip prostheses. P I MECH ENG H, 221(H6), 561-568.
Rocchi M, Affatato S, Falasca G & Viceconti M (2007) Thermomechanical analysis of ultra-high molecular weight polyethylene-metal hip prostheses.. Proc Inst Mech Eng H, 221(6), 561-568.
Cristofolini L, Erani P, Grupp T, Jansson V & Viceconti M (2007) In vitro long-term fatigue endurance of the secondary "Cement Injection Stem" hip prosthesis.. Artif Organs, 31(6), 441-451.
De Clerico M, Bordini B, Stea S, Viceconti M & Toni A (2007) Relationship between biometric characteristics and stem size of uncemented hip prostheses.. Artif Organs, 31(6), 480-483.
Baleani M, Persson C, Guandalini L, Piazza E, Erani P, Squarzoni S & Viceconti M (2007) The effect of gentamicin sulphate on the fracture properties of a manually mixed bone cement. FATIGUE FRACT ENG M, 30(6), 479-488.
Little JP, Taddei F, Viceconti M, Murray DW & Gill HS (2007) Changes in femur stress after hip resurfacing arthroplasty: response to physiological loads.. Clin Biomech (Bristol, Avon), 22(4), 440-448.
Siebes M, Viceconti M, Maglaveras N & Kirkpatrick CJ (2007) Engineering for health - A partner in building the knowledge economy of Europe. IEEE ENG MED BIOL, 26(3), 53-59.
Cristofolini L, Erani P, Savigni P, Grupp T, Thies O & Viceconti M (2007) Increased long-term failure risk associated with excessively thin cement mantle in cemented hip arthroplasty: a comparative in vitro study.. Clin Biomech (Bristol, Avon), 22(4), 410-421.
Tassani S, Baruffaldi F, Testi D, Cacciari C, Accarisi S & Viceconti M (2007) Personal Digital Assistant in an orthopaedic wireless ward: the HandHealth project.. Comput Methods Programs Biomed, 86(1), 21-29.
Perilli E, Baruffaldi F, Visentin M, Bordini B, Traina F, Cappello A & Viceconti M (2007) MicroCT examination of human bone specimens: effects of polymethylmethacrylate embedding on structural parameters.. J Microsc, 225(Pt 2), 192-200.
Cristofolini L, Erani P, Teutonico AS, Traina F, Viceconti M & Toni A (2007) Partially cemented AncaDualFit hip stems do not fail in simulated active patients.. Clin Biomech (Bristol, Avon), 22(2), 191-202.
Viceconti M, Zannoni C, Testi D, Petrone M, Perticoni S, Quadrani P, Taddei F, Imboden S & Clapworthy G (2007) The multimod application framework: a rapid application development tool for computer aided medicine.. Comput Methods Programs Biomed, 85(2), 138-151.
Cristofolini L, Juszczyk M, Martelli S, Taddei F & Viceconti M (2007) In vitro replication of spontaneous fractures of the proximal human femur.. J Biomech, 40(13), 2837-2845.
Ohman C, Baleani M, Perilli E, Dall'Ara E, Tassani S, Baruffaldi F & Viceconti M (2007) Mechanical testing of cancellous bone from the femoral head: experimental errors due to off-axis measurements.. J Biomech, 40(11), 2426-2433.
Affatato S, Leardini A, Leardini W, Giannini S & Viceconti M (2007) Meniscal wear at a three-component total ankle prosthesis by a knee joint simulator.. J Biomech, 40(8), 1871-1876.
Reggiani B, Cristofolini L, Varini E & Viceconti M (2007) Predicting the subject-specific primary stability of cementless implants during pre-operative planning: preliminary validation of subject-specific finite-element models.. J Biomech, 40(11), 2552-2558.
Schileo E, Taddei F, Malandrino A, Cristofohni L & Viceconti M (2007) Subject-specific finite element models can accurately predict strain levels in long bones. J BIOMECH, 40(13), 2982-2989.
Schileo E, Taddei F, Malandrino A, Cristofolini L & Viceconti M (2007) Subject-specific finite element models can accurately predict strain levels in long bones.. J Biomech, 40(13), 2982-2989.
Dall'Ara E, Ohman C, Baleani M & Viceconti M (2007) The effect of tissue condition and applied load on Vickers hardness of human trabecular bone. J BIOMECH, 40(14), 3267-3270.
Dall'Ara E, Ohman C, Baleani M & Viceconti M (2007) The effect of tissue condition and applied load on Vickers hardness of human trabecular bone.. J Biomech, 40(14), 3267-3270.
Taddei F, Ansaloni M, Testi D & Viceconti M (2007) Virtual palpation of skeletal landmarks with multimodal display interfaces. Informatics for Health and Social Care, 32(3), 191-198.
Taddei F, Martelli S, Reggiani B, Cristofolini L & Viceconti M (2006) Finite-element modeling of bones from CT data: sensitivity to geometry and material uncertainties.. IEEE Trans Biomed Eng, 53(11), 2194-2200.
Van Sint Jan S, Sobzack S, Dugailly PM, Feipel V, Lefèvre P, Lufimpadio JL, Salvia P, Viceconti M & Rooze M (2006) Low-dose computed tomography: a solution for in vivo medical imaging and accurate patient-specific 3D bone modeling?. Clin Biomech (Bristol, Avon), 21(9), 992-998.
Leardini A, Belvedere C, AStolfi L, Fantozzi S, Viceconti M, Taddei F, Ensini A, Benedetti MG & Catani F (2006) A new software tool for 3D motion analyses of the musculo-skeletal system. CLIN BIOMECH, 21(8), 870-879.
Leardini A, Belvedere C, Astolfi L, Fantozzi S, Viceconti M, Taddei F, Ensini A, Benedetti MG & Catani F (2006) A new software tool for 3D motion analyses of the musculo-skeletal system.. Clin Biomech (Bristol, Avon), 21(8), 870-879.
Baleani M, Ohman C, Guandalini L, Rotini R, Giavaresi G, Traina F & Viceconti M (2006) Comparative study of different tendon grasping techniques for arthroscopic repair of the rotator cuff.. Clin Biomech (Bristol, Avon), 21(8), 799-803.
Van Sint Jan S, Demondion X, Clapworthy G, Louryan S, Rooze M, Cotten A & Viceconti M (2006) Multimodal visualization interface for data management, self-learning and data presentation.. Surg Radiol Anat, 28(5), 518-524.
Testi D, Lattanzi R, Benvegnù M, Petrone M, Zannoni C, Viceconti M & Toni A (2006) Efficacy of stereoscopic visualization and six degrees of freedom interaction in preoperative planning of total hip replacement.. Med Inform Internet Med, 31(3), 205-218.
Persson C, Baleani M, Guandalini L, Tigani D & Viceconti M (2006) Mechanical effects of the use of vancomycin and meropenem in acrylic bone cement.. Acta Orthop, 77(4), 617-621.
Tsagarakis NG, Gray JO, Caldwell DG, Zannoni C, Petrone M, Testi D & Viceconti M (2006) A haptic enabled multimodal interface for the planning of hip arthroplasty. IEEE MULTIMEDIA, 13(3), 40-48.
Baleani M, Peroni C, Cristofolini L, Traina F, Silbermann M, Sawaed S & Viceconti M (2006) Multiaxial miniaturized load cell for measuring forces acting through a sternotomy. EXP TECHNIQUES, 30(4), 23-28.
Varini E, Cristofolini L, Viceconti M & Traina F (2006) Stem damage during implantation of modular hip prostheses.. Artif Organs, 30(7), 564-567.
Viceconti M, Testi D, Taddei F, Martelli S, Clapworthy GJ & Jan SV (2006) Biomechanics modeling of the musculoskeletal apparatus: Status and key issues. P IEEE, 94(4), 725-739.
Viceconti M, Pancanti A, Varini E, Traina F & Cristofolini L (2006) On the biomechanical stability of cementless straight conical hip stems. P I MECH ENG H, 220(H3), 473-480.
Viceconti M, Pancanti A, Varini E, Traina F & Cristofolini L (2006) On the biomechanical stability of cementless straight conical hip stems.. Proc Inst Mech Eng H, 220(3), 473-480.
Affatato S, Bersaglia G, Yin JQ, Traina F, Toni A & Viceconti M (2006) The predictive power of surface profile parameters on the amount of wear measured in vitro on metal-on-polyethylene artificial hip joints. P I MECH ENG H, 220(H3), 457-464.
Affatato S, Bersaglia G, Junqiang Y, Traina F, Toni A & Viceconti M (2006) The predictive power of surface profile parameters on the amount of wear measured in vitro on metal-on-polyethylene artificial hip joints.. Proc Inst Mech Eng H, 220(3), 457-464.
Cristofolini L & Viceconti M (2006) Comments on "Stair climbing is more critical than walking in pre-clinical assessment of primary stability in cementless THA in vitro" by Jean-Pierre Kassi, Markus O. Heller, Ulrich Stoeckle, Carsten Perka, Georg N. Duda, Published on J. Biomechanics 2005; 38: 1143-1154.. J Biomech, 39(16), 3085-3087.
Testi D, Lattanzi R, Benvegnù M, Viceconti M, Toni A, Petrone M & Zannoni C (2006) Efficacy of stereoscopic visualization and six degreesof freedom interaction in preoperative planningof total hip replacement. Informatics for Health and Social Care, 31(3), 205-218.
Arbona A, Benkner S, Fingberg J, Frangi AF, Hofmann M, Hose DR, Lonsdale G, Ruefenacht D & Viceconti M (2006) Outlook for grid service technologies within the @neurIST eHealth environment.. Stud Health Technol Inform, 120, 401-404.
Viceconti M, Brusi G, Pancanti A & Cristofolini L (2006) Primary stability of an anatomical cementless hip stem: a statistical analysis.. J Biomech, 39(7), 1169-1179.
Taddei F, Cristofolini L, Martelli S, Gill HS & Viceconti M (2006) Subject-specific finite element models of long bones: An in vitro evaluation of the overall accuracy.. J Biomech, 39(13), 2457-2467.
Reggiani B, Cristofolini L & Viceconti M (2005) Accuracy of the planned vs achieved position of a cementless hip stem: A finite element study. University of Parma / Ingegneria Industriale - 22nd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, DAS 2005, 123-124.
Viceconti M, Olsen S, Nolte LP & Burton K (2005) Extracting clinically relevant data from finite element simulations (vol 20, pg 451, 2005). CLIN BIOMECH, 20(9), 1010-1010.
Leardini A, Astolfi L, Fantozzi S, Viceconti M, Benedetti MG & Catani F (2005) Advanced multimodal visualisation of clinical gait and fluoroscopy analyses in the assessment of total knee replacement.. Comput Methods Programs Biomed, 79(3), 227-240.
Popescu FC, Viceconti M, Traina F & Toni A (2005) Evaluation of achievable registration accuracy of the femur during minimally invasive total hip replacement.. Med Biol Eng Comput, 43(4), 421-430.
Viceconti M, Olsen S, Nolte LP & Burton K (2005) Extracting clinically relevant data from finite element simulations.. Clin Biomech (Bristol, Avon), 20(5), 451-454.
Viceconti M, Testi D & Toni A (2005) Computer-assisted three-dimensional preoperative planning in hip surgery. Minerva Ortopedica e Traumatologica, 56(2), 81-92.
Viceconti M, Olsen S, Nolte L-P & Burton K (2005) Erratum: Extracting clinically relevant data from finite element simulations (Clinical Biomechanics (2005) 20 (451-454) DOI: 10.1016/j. clinbiomech.2005.01.010). Clinical Biomechanics, 20(9), 1010-1010.
Taddei F, Stagni A, Cappello M, Manfrini R, Albisinni U & Viceconti M (2005) Kinematic study of a reconstructed hip in paediatric oncology.. Med Biol Eng Comput, 43(1), 102-106.
Guandalini L, Baleani M & Viceconti M (2004) A procedure and criterion for bone cement fracture toughness tests. P I MECH ENG H, 218(H6), 445-450.
Viceconti M, Ricci S, Pancanti A & Cappello A (2004) Numerical model to predict the long-term mechanical stability of cementless orthopaedic implants.. Med Biol Eng Comput, 42(6), 747-753.
Viceconti M, Davinelli M, Taddei F & Cappello A (2004) Automatic generation of accurate subject-specific bone finite element models to be used in clinical studies. J BIOMECH, 37(10), 1597-1605.
Viceconti M, Davinelli M, Taddei F & Cappello A (2004) Automatic generation of accurate subject-specific bone finite element models to be used in clinical studies.. J Biomech, 37(10), 1597-1605.
Viceconti M, Chiarini A, Testi D, Taddei F, Bordini B, Traina F & Toni A (2004) New aspects and approaches in pre-operative planning of hip reconstruction: a computer simulation.. Langenbecks Arch Surg, 389(5), 400-404.
Testi D, Quadrani P, Petrone M, Zannoni C, Fontana F & Viceconti M (2004) JIDE: a new software for computer-aided design of hip prosthesis.. Comput Methods Programs Biomed, 75(3), 213-220.
Testi D, Cappello A, Sgallari F, Rumpf M & Viceconti M (2004) A new software for prediction of femoral neck fractures.. Comput Methods Programs Biomed, 75(2), 141-145.
Testi D, Simeoni M, Zannoni C & Viceconti M (2004) Validation of two algorithms to evaluate the interface between bone and orthopaedic implants.. Comput Methods Programs Biomed, 74(2), 143-150.
Lattanzi R, Baruffaldi F, Zannoni C & Viceconti M (2004) Specialised CT scan protocols for 3-D pre-operative planning of total hip replacement.. Med Eng Phys, 26(3), 237-245.
Gnudi S, Malavolta N, Testi D & Viceconti M (2004) Differences in proximal femur geometry distinguish vertebral from femoral neck fractures in osteoporotic women.. Br J Radiol, 77(915), 219-223.
Viceconti M, Pancanti A, Dotti M, Traina F & Cristofolini L (2004) Effect of the initial implant fitting on the predicted secondary stability of a cementless stem.. Med Biol Eng Comput, 42(2), 222-229.
Guandalini L, Baleani M & Viceconti M (2004) A procedure and criterion for bone cement fracture toughness tests.. Proc Inst Mech Eng H, 218(6), 445-450.
Taddei F, Pancanti A & Viceconti M (2004) An improved method for the automatic mapping of computed tomography numbers onto finite element models.. Med Eng Phys, 26(1), 61-69.
Toni A, Traina F & Viceconti M (2003) Computer-assisted tridimensional preoperative planning in hip revision surgery.. Chir Organi Mov, 88(3), 273-280.
Cristofolini L, Metti C & Viceconti M (2003) Strain patterns induced by press-fitting and by an external load in hip arthroplasty: a photoelastic coating study on bone models. J STRAIN ANAL ENG, 38(4), 289-301.
Popescu F, Viceconti M, Grazi E & Cappello A (2003) A new method to compare planned and achieved position of an orthopaedic implant.. Comput Methods Programs Biomed, 71(2), 117-127.
Viceconti M, Lattanzi R, Antonietti B, Paderni S, Olmi R, Sudanese A & Toni A (2003) CT-based surgical planning software improves the accuracy of total hip replacement preoperative planning.. Med Eng Phys, 25(5), 371-377.
Pancanti A, Bernakiewicz M & Viceconti M (2003) The primary stability of a cementless stem varies between subjects as much as between activities.. J Biomech, 36(6), 777-785.
Taddei F, Manfrini M, Giacomini S & Viceconti M (2003) A computer assisted approach for monitoring and planning biological reconstructions in orthopaedic oncology: preliminary results and future perspectives.. Chir Organi Mov, 88(2), 211-215.
Lattanzi R, Grazi E, Testi D, Viceconti M, Cappello A & Toni A (2003) Accuracy and repeatability of cementless total hip replacement surgery in patients with deformed anatomies.. Med Inform Internet Med, 28(1), 59-71.
Viceconti M, Testi D, Simeoni M & Zannoni C (2003) An automated method to position prosthetic components within multiple anatomical spaces.. Comput Methods Programs Biomed, 70(2), 121-127.
Testi D, Traina F, Viceconti M, Cappello A, Sgallari F & Rumpf M (2003) A new approach for improving the prediction of femoral neck fracture. HIP International, 13(2), 74-79.
Lattanzi R, Grazi E, Testi D, Viceconti M, Toni A & Cappello A (2003) Accuracy and repeatability of cementless total hip replacement surgery in patients with deformed anatomies. Informatics for Health and Social Care, 28(1), 59-71.
Viceconti M & Taddei F (2003) Automatic generation of finite element meshes from computed tomography data.. Crit Rev Biomed Eng, 31(1-2), 27-72.
Polgár K, Gill HS, Viceconti M, Murray DW & O'Connor JJ (2003) Development and numerical validation of a finite element model of the muscle standardized femur.. Proc Inst Mech Eng H, 217(3), 165-172.
Taddei F, Viceconti M, Manfrini M & Toni A (2003) Mechanical strength of a femoral reconstruction in paediatric oncology: a finite element study. P I MECH ENG H, 217(H2), 111-119.
Taddei F, Viceconti M, Manfrini M & Toni A (2003) Mechanical strength of a femoral reconstruction in paediatric oncology: a finite element study.. Proc Inst Mech Eng H, 217(2), 111-119.
Polgár K, Gill HS, Viceconti M, Murray DW & O'Connor JJ (2003) Strain distribution within the human femur due to physiological and simplified loading: finite element analysis using the muscle standardized femur model.. Proc Inst Mech Eng H, 217(3), 173-189.
Viceconti M, Ansaloni M, Baleani M & Toni A (2003) The muscle standardised femur.. J Biomech, 36(1), 145-146.
Viceconti M, Ansaloni M, Baleani M & Toni A (2003) The muscle standardized femur: a step forward in the replication of numerical studies in biomechanics. P I MECH ENG H, 217(H2), 105-110.
Viceconti M, Ansaloni M, Baleani M & Toni A (2003) The muscle standardized femur: a step forward in the replication of numerical studies in biomechanics.. Proc Inst Mech Eng H, 217(2), 105-110.
Lattanzi R, Viceconti M, Zannoni C, Quadrani P & Toni A (2002) Hip-Op: an innovative software to plan total hip replacement surgery.. Med Inform Internet Med, 27(2), 71-83.
Testi D, Viceconti M, Cappello A & Gnudi S (2002) Prediction of hip fracture can be significantly improved by a single biomedical indicator.. Ann Biomed Eng, 30(6), 801-807.
Cristofolini L, Minari C & Viceconti M (2002) A methodology and criterion for acrylic bone cement fatigue tests - Reply of the authors of the letter to the editor by P. J. Prendergast et al. (2002) - Letter to the editor. Fatigue Fract. Engng. Mater. Struct. 25, 315-316. FATIGUE FRACT ENG M, 25(3), 317-318.
Viceconti M, Lattanzi R, Zannoni C & Cappello A (2002) Effect of display modality on spatial accuracy of orthopaedic surgery pre-operative planning applications.. Med Inform Internet Med, 27(1), 21-32.
Prendergast PJ, Murphy BP, Taylor D, Cristofolini L, Minari C & Viceconti M (2002) Discarding specimens for fatigue testing of orthopaedic bone cement: A comment on cristofolini et al. (2000) Fatigue Fract. Engng. Mater. Struct. 23, 953-957 (multiple letters). Fatigue and Fracture of Engineering Materials and Structures, 25(3), 315-318.
Viceconti M, Lattanzi R, Cappello A & Zannoni C (2002) Effect of display modality on spatial accuracy of orthopaedic surgery pre-operative planning applications. Informatics for Health and Social Care, 27(1), 21-32.
Taddei F, Viceconti M, Manfrini M & Toni A (2002) Growth and remodelling of the autologous bone transplant used in a pediatric femoral reconstruction. P I MECH ENG H, 216(H2), 95-104.
Taddei F, Viceconti M, Manfrini M & Toni A (2002) Growth and remodelling of the autologous bone transplant used in a pediatric femoral reconstruction.. Proc Inst Mech Eng H, 216(2), 95-104.
Lattanzi R, Viceconti M, Toni A, Zannoni C & Quadrani P (2002) Hip-Op: An innovative software to plan total hip replacement surgery. Informatics for Health and Social Care, 27(2), 71-83.
Bernakiewicz M & Viceconti M (2002) The role of parameter identification in finite element contact analyses with reference to orthopaedic biomechanics applications.. J Biomech, 35(1), 61-67.
Testi D, Cappello A, Chiari L, Viceconti M & Gnudi S (2001) Comparison of logistic and Bayesian classifiers for evaluating the risk of femoral neck fracture in osteoporotic patients.. Med Biol Eng Comput, 39(6), 633-637.
Viceconti M, Monti L, Muccini R, Bernakiewicz M & Toni A (2001) Even a thin layer of soft tissue may compromise the primary stability of cementless hip stems.. Clin Biomech (Bristol, Avon), 16(9), 765-775.
Cristofolini L & Viceconti M (2001) Comments on "femoral surface strain in intact composite femurs: a custom computer analysis of the photoelastic coating technique.".. IEEE Trans Biomed Eng, 48(8), 944-945.
Testi D, Zannoni C, Cappello A & Viceconti M (2001) Border-tracing algorithm implementation for the femoral geometry reconstruction.. Comput Methods Programs Biomed, 65(3), 175-182.
Viceconti M, Cristofolini L, Baleani M & Toni A (2001) Pre-clinical validation of a new partially cemented femoral prosthesis by synergetic use of numerical and experimental methods.. J Biomech, 34(6), 723-731.
Viceconti M, Testi D, Gori R, Zannoni C, Cappello A & De Lollis A (2001) HIDE: a new hybrid environment for the design of custom-made hip prosthesis.. Comput Methods Programs Biomed, 64(2), 137-144.
Polgar K, Viceconti M & O'Connor JJ (2001) A comparison between automatically generated linear and parabolic tetrahedra when used to mesh a human femur. P I MECH ENG H, 215(H1), 85-94.
Polgar K, Viceconti M & O'Connor JJ (2001) A comparison between automatically generated linear and parabolic tetrahedra when used to mesh a human femur.. Proc Inst Mech Eng H, 215(1), 85-94.
Viceconti M, Cristofolini L & Toni A (2001) Design revision of a partially cemented hip stem. P I MECH ENG H, 215(H5), 471-478.
Viceconti M, Cristofolini L & Toni A (2001) Design revision of a partially cemented hip stem.. Proc Inst Mech Eng H, 215(5), 471-478.
Testi D, Viceconti M, Cappello A, Gnudi S & Toni A (2001) Fracture prediction for the femoral neck using finite element models.. Chir Organi Mov, 86(1), 59-64.
Monti L, Cristofolini L & Viceconti M (2001) Interface biomechanics of the Anca Dual Fit hip stem: an in vitro experimental study. P I MECH ENG H, 215(H6), 555-564.
Monti L, Cristofolini L & Viceconti M (2001) Interface biomechanics of the Anca Dual fit hip stem: an in vitro experimental study.. Proc Inst Mech Eng H, 215(6), 555-564.
Viceconti M, Muccini R, Bernakiewicz M, Baleani M & Cristofolini L (2000) Large-sliding contact elements accurately predict levels of bone-implant micromotion relevant to osseointegration.. J Biomech, 33(12), 1611-1618.
Cristofolini L, Minari C & Viceconti M (2000) A methodology and criterion for acrylic bone cement fatigue tests. FATIGUE FRACT ENG M, 23(11), 953-957.
Baleani M, Viceconti M, Muccini R & Ansaloni M (2000) Endurance verification of custom-made hip prostheses. INT J FATIGUE, 22(10), 865-871.
Cristofolini L, Marchetti A, Cappello A & Viceconti M (2000) A novel transducer for the measurement of cement-prosthesis interface forces in cemented orthopaedic devices.. Med Eng Phys, 22(7), 493-501.
Viceconti M, Testi D, Gori R & Zannoni C (2000) Development of a software for the design of custom-made hip prostheses using an open-source rapid application development environment.. Med Inform Internet Med, 25(3), 183-193.
Muccini R, Baleani M & Viceconti M (2000) Selection of the best element type in the finite element analysis of hip prostheses.. J Med Eng Technol, 24(4), 145-148.
Viceconti M (2000) A comparative study on different methods of automatic mesh generation of human femurs. Medical Engineering and Physics 20 (1998): 1-10.. Med Eng Phys, 22(5), 379-380.
Baleani M, Viceconti M & Toni A (2000) The effect of sandblasting treatment on endurance properties of titanium alloy hip prostheses.. Artif Organs, 24(4), 296-299.
Cristofolini L & Viceconti M (2000) Mechanical validation of whole bone composite tibia models.. J Biomech, 33(3), 279-288.
Cristofolini L & Viceconti M (2000) Development and validation of a technique for strain measurement inside polymethyl methacrylate. J STRAIN ANAL ENG, 35(1), 21-33.
Viceconti M, Testi D, Gori R & Zannoni C (2000) Development of a software for the design of custom-made hip prostheses using an open-source rapid application development environment. Informatics for Health and Social Care, 25(3), 183-193.
Monti L, Cristofolini L & Viceconti M (1999) Methods for quantitative analysis of the primary stability in uncemented hip prostheses.. Artif Organs, 23(9), 851-859.
Testi D, Viceconti M, Baruffaldi F & Cappello A (1999) Risk of fracture in elderly patients: a new predictive index based on bone mineral density and finite element analysis.. Comput Methods Programs Biomed, 60(1), 23-33.
Viceconti M, Zannoni C, Testi D & Cappello A (1999) CT data sets surface extraction for biomechanical modeling of long bones.. Comput Methods Programs Biomed, 59(3), 159-166.
Baleani M, Cristofolini L & Viceconti M (1999) Endurance testing of hip prostheses: a comparison between the load fixed in ISO 7206 standard and the physiological loads.. Clin Biomech (Bristol, Avon), 14(5), 339-345.
Viceconti M, Zannoni C, Pierotti L & Casali M (1999) Spatial positioning of an hip stem solid model within the CT data set of the host bone (vol 58, pg 219, 1999). COMPUT METH PROG BIO, 59(2), 143-144.
Viceconti M, Zannoni C, Testi D & Cappello A (1999) A new method for the automatic mesh generation of bone segments from CT data.. J Med Eng Technol, 23(2), 77-81.
Viceconti M, Zannoni C, Pierotti L & Casali M (1999) Spatial positioning of an hip stem solid model within the CT data set of the host bone.. Comput Methods Programs Biomed, 58(3), 219-226.
Mattioli P, Klutke PJ, Baruffaldi F, Viceconti M, Toni A & Englmeier KH (1999) A study of the application sharing capabilities in telemedicine.. Comput Methods Programs Biomed, 58(2), 89-97.
Cristofolini L & Viceconti M (1999) In vitro stress shielding measurements can be affected by large errors.. J Arthroplasty, 14(2), 215-219.
Viceconti M, Zannoni C, Pierotti L & Casali M (1999) Erratum: Spatial positioning of an hip stem solid model within the CT data set of the host bone (Computer Methods and Programs in Biomedicine (1999) 58 (219-226) PII: S0169260798000893). Computer Methods and Programs in Biomedicine, 59(2), 143-144.
Cristofolini L & Viceconti M (1999) Towards the standardization of in vitro load transfer investigations of hip prostheses. J STRAIN ANAL ENG, 34(1), 1-15.
Zannoni C, Mantovani R & Viceconti M (1998) Material properties assignment to finite element models of bone structures: a new method.. Med Eng Phys, 20(10), 735-740.
Viceconti M, Baleani M, De Lollis A & Toni A (1998) An FEA-based protocol for the pre-clinical validation of custom-made hip implants. J MED ENG TECHNOL, 22(6), 257-262.
Zannoni C, Viceconti M, Pierotti L & Cappello A (1998) Analysis of titanium induced CT artifacts in the development of biomechanical finite element models.. Med Eng Phys, 20(9), 653-659.
Zannoni C, Cappello A & Viceconti M (1998) Optimal CT scanning plan for long-bone 3-D reconstruction. IEEE T MED IMAGING, 17(4), 663-666.
Viceconti M, Zannoni C & Pierotti L (1998) TRI2SOLID: an application of reverse engineering methods to the creation of CAD models of bone segments. COMPUT METH PROG BIO, 56(3), 211-220.
Cappello A, Viceconti M, Nanni F & Catania G (1998) Global asymptotic stability of bone remodeling theories: a new approach based on non-linear dynamical systems analysis. J BIOMECH, 31(3), 289-294.
Viceconti M, Bellingeri L, Cristofolini L & Toni A (1998) A comparative study on different methods of automatic mesh generation of human femurs. MED ENG PHYS, 20(1), 1-10.
Cristofolini L & Viceconti M (1997) Comparison of uniaxial and triaxial rosette gages for strain measurement in the femur. EXP MECH, 37(3), 350-354.
Viceconti M, Baleani M, Squarzoni S & Toni A (1997) Fretting wear in a modular neck hip prosthesis. J BIOMED MATER RES, 35(2), 207-216.
Cristofolini L, McNamara BP, Freddi A & Viceconti M (1997) In vitro measured strains in the loaded femur: Quantification of experimental error. J STRAIN ANAL ENG, 32(3), 193-200.
Ramer M, Viceconti M, Toni A, Pipino F & Giunti A (1997) Biomechanical validation of a new nail-plate for the repair of stable proximal femoral fractures. ARCH ORTHOP TRAUM SU, 116(3), 137-142.
Viceconti M, Bellingeri L, Baleani M & Toni A (1997) Computerized mechanical validation of custom-made stems.. La Chirurgia degli organi di movimento, 82(3), 263-268.
Baleani M, Viceconti M, Walchholz K & Toni A (1997) Metallic wear debris in dual modular hip arthroplasty.. La Chirurgia degli organi di movimento, 82(3), 231-238.
Cristofolini L, Cappello A, McNamara BP & Viceconti M (1996) A minimal parametric model of the femur to describe axial elastic strain in response to loads. MED ENG PHYS, 18(6), 502-514.
Viceconti M, Casali M, Massari B, Cristofolini L, Bassini S & Toni A (1996) The 'standardized femur program' proposal for a reference geometry to be used for the creation of finite element models of femur. J BIOMECH, 29(9), 1241-1241.
Viceconti M, Cavallotti G, Andrisano AO & Toni A (1996) Discussion on the design of a hip joint simulator. MED ENG PHYS, 18(3), 234-240.
Cristofolini L, Viceconti M, Cappello A & Toni A (1996) Mechanical validation of whole bone composite femur models. J BIOMECH, 29(4), 525-535.
Toni A, McNamara B, Viceconti M, Sudanese A, Baruffaldi F & Giunti A (1996) Bone remodelling after total hip arthroplasty. J MATER SCI-MATER M, 7(3), 149-152.
Viceconti M, Ruggeri O, Toni A & Giunti A (1996) Design-related fretting wear in modular neck hip prosthesis. J BIOMED MATER RES, 30(2), 181-186.
Harrigan TP, Hamilton JJ, Reuben JD, Toni A & Viceconti M (1996) Bone remodelling adjacent to intramedullary stems: An optimal structures approach. BIOMATERIALS, 17(2), 223-232.
Zaffagnini S, Loreti I, Marcacci M, Viceconti M, Toni A, Maltarello MC & Rocca M (1996) Evaluation at 4, 6 and 12 months of the biomechanical and ultrastructural features of the patellar tendon autograft pro-ACL in a sheep model. European Journal of Sports Traumatology and Related Research, 18(1), 16-26.
Viceconti M, Toni A, Brizio L, Rubbini L & Borrelli A (1996) The effect of autoclaving on the mechanical properties of bank bovine bone.. La Chirurgia degli organi di movimento, 81(1), 63-68.
VICECONTI M, TONI A & GIUNTI A (1995) EFFECTS OF SOME TECHNOLOGICAL ASPECTS ON THE FATIGUE-STRENGTH OF A CEMENTLESS HIP STEM. J BIOMED MATER RES, 29(7), 875-881.
CRISTOFOLINI L, VICECONTI M, TONI A & GIUNTI A (1995) INFLUENCE OF THIGH MUSCLES ON THE AXIAL STRAINS IN A PROXIMAL FEMUR DURING EARLY STANCE IN GAIT. J BIOMECH, 28(5), 617-624.
HARMAN MK, TONI A, CRISTOFOLINI L & VICECONTI M (1995) INITIAL STABILITY OF UNCEMENTED HIP STEMS - AN IN-VITRO PROTOCOL TO MEASURE TORSIONAL INTERFACE MOTION. MED ENG PHYS, 17(3), 163-171.
Zaffagnini S, Rocca M, Viceconti M, Maltarello MC, Toni A, Loreti I & Marcacci M (1995) Evaluation at 4, 6 and 12 months of the biomechanical and ultrastructural features of the patellar tendon autograft pro-ACL in a sheep model. Journal of Sports Traumatology and Related Research, 17(4), 16-26.
VICECONTI M, ANDRISANO AO, TONI A & GIUNTI A (1994) AUTOMATIC FRACTURE REDUCTION WITH A COMPUTER-CONTROLLED EXTERNAL FIXATOR. MED ENG PHYS, 16(2), 143-149.
Baruffaldi F, Toni A, Viceconti M, Sudanese A, Brizio L & Giunti A (1994) Computer aided densitometric image analysis of bone remodelling after total hip arthroplasty. Technology and Health Care, 2(1), 53-60.
Viceconti M, Toni A & Giunti A (1994) Influence of the embedding media on the results of standard in vitro fatigue tests on the femoral components. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 208(3), 131-137.
VICECONTI M, SUDANESE A, TONI A & GIUNTI A (1993) A SOFTWARE SIMULATION OF TIBIAL FRACTURE REDUCTION WITH EXTERNAL FIXATOR. COMPUT METH PROG BIO, 40(2), 89-94.
VICECONTI M, BARUFFALDI F, GAIBA W, TONI A, SUDANESE A & GIUNTI A (1993) DIGITAL DYNAMIC-RANGE EXPANSION APPLIED TO X-RAY DENSITOMETRIC ANALYSIS OF TOTAL HIP-REPLACEMENT. J BIOMED ENG, 15(1), 57-59.
Toni A, Baruffaldi F, Viceconti M, Sudanese A, Fabbri F, Fanton F, Bueno Lozano A & Giunti A (1993) VALUTAZIONE DENSITOMETRICA COMPUTERIZZATA DEL RIMODELLAMENTO OSSEO NELLA PROTESI D'ANCA. Minerva Ortopedica e Traumatologica, 44(12), 955-963.
Toni A, Sudanese A, Viceconti M, Montina PP, Ciaroni D, Calista F, Terzi S & Giunti A (1992) Radiographic evaluation of HDPE cemented and cementless Lord and An.C.A. screwed acetabular models.. Chir Organi Mov, 77(4), 405-411.
VICECONTI M & SEIREG A (1990) A GENERALIZED PROCEDURE FOR PREDICTING BONE MASS REGULATION BY MECHANICAL STRAIN. CALCIFIED TISSUE INT, 47(5), 296-301.

Chapters

VICECONTI M, TONI A & GIUNTI A (1992) STRAIN-GAUGE ANALYSIS OF HARD TISSUES - FACTORS INFLUENCING MEASUREMENTS In Little EG (Ed.) (pp. 177-184)..

Conferences

Particelli F, Mecozzi L, Beraudi A, Montesi M, Baruffaldi F & Viceconti M (2011) A comparison between microCT and histology for the evaluation of cortical porosity: A preliminary study. BONE, 48, S176-S177.
Mecozzi L, Stoico R, Tassani S, Particelli F, Baruffaldi F & Viceconti M (2011) Bone mineral density measurements on cortical and trabecular specimens: Validation of a densitometric calibration protocol for in-vitro micro-CT. BONE, 48, S179-S179.
Beraudi A, Salsedo E, Weigt C, Montesi M, Ohman C, Kuhn GA, Baleani M, Stea S, Muller R & Viceconti M (2011) The effect of parathyroid hormone in ovariectomized mice model: A biological and mechanical approach. BONE, 48, S213-S213.
Ohman C, Montesi M, Lambers FM, Salsedo E, Beraudi A, Kuhn GA, Baleani M, Stea S, Muller R & Viceconti M (2011) The ovariectomized mouse is an effective model to study osteoporosis as assessed by morphometry, histology, protein expression and mechanical testing. BONE, 48, S204-S204.
Ihaddadene R, Affatato S, Zavalloni M, Bouzid S & Viceconti M (2011) Carbon composition effects on wear behaviour and wear mechanisms of metal-on-metal hip prosthesis. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 14, 33-34.
Viceconti M (2011) Collaborative Modeling and Simulation: The Virtual Physiological Human Vision. 2011 20TH IEEE INTERNATIONAL WORKSHOPS ON ENABLING TECHNOLOGIES: INFRASTRUCTURE FOR COLLABORATIVE ENTERPRISES (WETICE), 8-8.
Ihaddadene R, Affatato S, Zavalloni M, Bouzid S & Viceconti M (2011) Femoral head diameter and carbon composition effect on wear of metal-on-metal hip replacements. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 14, 31-32.
Hunter P, Coveney PV, de Bono B, Diaz V, Fenner J, Frangi AF, Harris P, Hose R, Kohl P, Lawford P, McCormack K, Mendes M, Omholt S, Quarteroni A, Skar J, Tegner J, Thomas SR, Tollis I, Tsamardinos I, van Beek JHGM & Viceconti M (2010) A vision and strategy for the virtual physiological human in 2010 and beyond. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 368(1920), 2595-2614.
Spinelli M, Carmignato S, Affatato S & Viceconti M (2009) CMM-based procedure for polyethylene non-congruous unicompartmental knee prosthesis wear assessment. WEAR, 267(5-8), 753-756.
Beraudi A, Stea S, Montesi M, Baleani M & Viceconti M (2009) Collagen orientation in human femur, tibia and fibula shaft by circularly polarized light. BONE, 44(2), S320-S320.
Tassani S, Ohman C, Baleani M, Baruffaldi F & Viceconti M (2009) The correlation between ash density and bone volume fraction is similar for trabecular and cortical bone. BONE, 44(2), S369-S369.
McFarlane NJB, Clapworthy GJ, Agrawal A, Viceconti M, Taddei F, Schileo E & Baruffaldi F (2008) 3D multiscale visualisation for medical datasets. MEDIVIS 2008: FIFTH INTERNATIONAL CONFERENCE BIOMEDICAL VISUALIZATION - INFORMATION VISUALIZATION IN MEDICAL AND BIOMEDICAL INFORMATICS, PROCEEDINGS, 47-52.
Agrawal A, Kohout J, Clapworthy G, McFarlane NJB, Dong F, Viceconti M, Taddei F & Testi D (2008) Adapting the Storage of Large Medical Datasets to Enable Interactive Display.. CGVR, 10-15.
Hraiech N, Taddei F, Malvesin E, Rochette M & Viceconti M (2008) Fast 3D mesh generation of femur based on planar parameterization and morphing. 2008 IEEE INTERNATIONAL SYMPOSIUM ON BIOMEDICAL IMAGING: FROM NANO TO MACRO, VOLS 1-4, 1561-1564.
Agrawal A, Kohout J, Clapworthy G, McFarlane NJB, Dong F, Viceconti M, Taddei F & Testi D (2008) Interactive Out-of-Core Exploration of Large Volume Datasets in VTK-Based Visualisation Systems.. TPCG, 1-8.
Zhao X, Liu EJ, Clapworthy G, Quadrani P, Testi D & Viceconti M (2008) Using Web Services for distributed medical visualisation. MEDIVIS 2008: FIFTH INTERNATIONAL CONFERENCE BIOMEDICAL VISUALIZATION - INFORMATION VISUALIZATION IN MEDICAL AND BIOMEDICAL INFORMATICS, PROCEEDINGS, 57-62.
Clapworthy GJ, Kohl P, Gregerson H, Thomas SR, Viceconti M, Hose DR, Pinney D, Fenner J, McCormack K, Lawford P, Jan SVS, Waters S & Coveney P (2007) Digital human modelling: A global vision and a European perspective. Digital Human Modeling, 4561, 549-558.
Affatato S, Leardini W, Jedenmalm A, Zavallonil M, Ruggeri O, Tarterini F & Viceconti M (2006) Microstructural effects on the wear resistance of Co-Cr implant alloys. Proceedings of the 8th Biennial Conference on Engineering Systems Design and Analysis, Vol 3, 943-951.
Viceconti M & Clapworthy G (2006) The Virtual Physiological Human: Challenges and opportunities. 2006 3RD IEEE INTERNATIONAL SYMPOSIUM ON BIOMEDICAL IMAGING: MACRO TO NANO, VOLS 1-3, 812-815.
Imboden S, Petrone M, Quadrani P, Zannoni C, Mayoral R, Clapworthy GJ, Testi D, Viceconti M, Neiberg D, Tsagarakis NG & Caldwell DG (2005) A haptic enabled multimodal pre-operative planner for hip arthroplasty. World Haptics Conference: First Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virutual Environment and Teleoperator Systems, Proceedings, 503-504.
Testi D, Zannoni C, Petrone M, Clapworthy GJ, Nieberg D, Tsagarakis NG, Caldwell DG & Viceconti M (2005) A multimodal and multisensorial pre-operative planning environment for total hip replacement. Third International Conference on Medical Information Visualisation - BioMedical Visualisation (MediVis 2005), Proceedings, 25-29.
Krokos M, Podgorelec D, Clapworthy GJ, Liang RH, Testi D & Viceconti M (2005) Patient-specific muscle models for surgical planning. Third International Conference on Medical Information Visualisation - BioMedical Visualisation (MediVis 2005), Proceedings, 3-8.
Jan SVS, Viceconti M & Clapworthy G (2004) Modern visualisation tools for research and education in biomechanics. EIGHTH INTERNATIONAL CONFERENCE ON INFORMATION VISUALISATION, PROCEEDINGS, 9-14.
Krokos M, Savenko A, Clapworthy GJ, Lin H, Mayoral R, Viceconti M & Jan SVS (2004) Real-time visualisation within the Multimod Application Framework. EIGHTH INTERNATIONAL CONFERENCE ON INFORMATION VISUALISATION, PROCEEDINGS, 21-26.
Viceconti M, Astolfi L, Leardini A, Imboden S, Petrone M, Quadrani P, Taddei F, Testi D & Zannoni C (2004) The Multimod Application Framework. EIGHTH INTERNATIONAL CONFERENCE ON INFORMATION VISUALISATION, PROCEEDINGS, 15-20.
Zannoni C, Viceconti M, Lattanzi R & Petrone M (2003) Efficacy of fully 3D monomodal interface in pre-operative planning of total hip replacement. CARS 2003: COMPUTER ASSISTED RADIOLOGY AND SURGERY, PROCEEDINGS, 1256, 648-653.
Lattanzi R, Viceconti M, Petrone M, Quadrani P & Zannoni C (2002) Applications of 3D medical imaging in orthopaedic surgery: Introducing the Hip-Op system. FIRST INTERNATIONAL SYMPOSIUM ON 3D DATA PROCESSING VISUALIZATION AND TRANSMISSION, 808-811.
Bernakiewicz M, Viceconti M & Toni A (2001) Investigation of the influence of periprosthetic fibrous tissue on the primary stability of uncemented hip prostheses. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING - 3, 21-26.
Viceconti M, Taddei F, Gori R, Zannoni C, Bernakiewicz M & Toni A (2001) Modelling the biomechanics of total hip replacement: How to take into account the surgeon and the patient. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING - 3, 389-394.
Testi D, Viceconti M, Cappello A & Gnudi S (2001) Predicting femoral neck fracture using finite element analysis. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING - 3, 9-14.
Zannoni C, Gori R, Quadrani P, Viceconti M & Toni A (2001) Preoperative planning tools for total hip arthroplasty. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING - 3, 395-399.
Viceconti M, Zannoni C, Baruffaldi F, Pierotti L, Toni A & Cappello A (1998) CT-scan data acquisition to generate biomechanical models of bone structures. COMPUTER METHODS IN BIOMECHANICS & BIOMEDICAL ENGINEERING - 2, 279-287.
Viceconti M, Cristofolini L & Toni A (1998) Numerical and experimental cross-investigation of total hip replacements. EXPERIMENTAL MECHANICS, VOLS 1 AND 2, 845-849.
Toni A, Viceconti M, Cristofolini L, Baleani M, Acquisti G & Schreiner R (1998) Torsional stability of total hip arthroplasty: In-vitro and FEM analysis with new trends for the future. COMPUTER METHODS IN BIOMECHANICS & BIOMEDICAL ENGINEERING - 2, 77-86.
Cristofolini L, Monti L & Viceconti M (1998) Uncemented hip prostheses: An in-vitro analysis of torsional stability. EXPERIMENTAL MECHANICS, VOLS 1 AND 2, 857-862.
Zannoni C, Viceconti M, Pierotti L & Cappello A (1997) Evaluation of CT accuracy in orthopaedic implants geometry reconstruction. PROCEEDINGS OF THE 19TH ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY, VOL 19, PTS 1-6, 19, 1862-1864.
Zannoni C, Viceconti M, Pierotti L & Cappello A (1997) Evaluation of the effects of titanium induced ct artifacts on biomechanical models generation. PROCEEDINGS OF THE 19TH ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY, VOL 19, PTS 1-6, 19, 1859-1861.
Viceconti M, Cappello A, Massari B, Bertozzi A & Zannoni C (1997) Optimal slice positioning for long bone CT reconstruction. PROCEEDINGS OF THE 18TH ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY, VOL 18, PTS 1-5, 18, 674-675.
VICECONTI M, ODORICI L, SUDANESE A, MASETTI G, TONI A, GIUNTI A & ANDRISANO AO (1992) A COMPUTER-MODEL TO SIMULATE THE BEHAVIOR OF A NEW ROBOTIC EXTERNAL-FIXATOR. RECENT ADVANCES IN COMPUTER METHODS IN BIOMECHANICS & BIOMEDICAL ENGINEERING, 101-107.

Internet publications

Viceconti M (2007) The Virtual Physiological Human..