# Derek B. Ingham

#### Professor of Applied Mathematics

Energy Engineering Group

Department of Mechanical Engineering

The Arts Tower, level 1

Western Bank

Sheffield

S10 2TN

Phone: 0114 21 57215

Email: d.ingham@sheffield.ac.uk

#### Profile

Professor Derek Ingham is an applied mathematician who has worked on a wide variety of engineering and industrial mathematical problems in collaboration with numerous engineering scientists and with several industries and acted as an Expert Witness. He has published research papers with members of staff in all the engineering and environment departments, and several science and medical departments. At present he supervises 15 PhD students and has successfully supervised over 100 PhD students. Further, he is on the editorial board of 12 international journals, has written 16 research books, over 900 research papers in referred journals and over 40 confidential industrial reports. He has received funding from over 70 different organizations.

In particular, he has research interests in heat and fluid flows: flows in porous media, ill-proposed problems, cementing of oil castings, proppant transport in fractures, Stirling Engines, heating of oils and in ship holds. Carbon capture and storage. Environment: wind energy, fuel cells, ventilation, fume cupboards, sampling, aerosols, filtration, gravity currents, atomisers, blowing snow. Computational Fluid Dynamics: Finite volume methods, finite element methods, Lattice Boltzman methods, boundary element methods. Turbulence. Boundary layer theory.

### Books

- Ingham DB & Pop I (2005) Transport Phenomena in Porous Media III.
- Ingham DB & Pop I (2005) Preface.
- (2005) Transport Phenomena in Porous Media III.

### Journal articles

- Elsakka MM, Ingham D, Ma L & Pourkashanian M (2019) CFD analysis of the angle of attack for a vertical axis wind turbine blade. Energy Conversion and Management, 182, 154-165. View this article in WRRO
- Bouras I, Ma L, Ingham D & Pourkashanian M (2019) Response to the discussion on “An improved k – ω turbulence model for the simulations of the wind turbine wakes in a neutral atmospheric boundary layer flow” by Y Yang. Journal of Wind Engineering and Industrial Aerodynamics, 184, 456-457.
- Lu X, Xie P, Ingham DB, Ma L & Pourkashanian M (2018) A porous media model for CFD simulations of gas-liquid two-phase flow in rotating packed beds. Chemical Engineering Science, 189, 123-134. View this article in WRRO
- Ding H, Xie P, Ingham D, Ma L & Pourkashanian M (2018) Flow behaviour of drop and jet modes of a laminar falling film on horizontal tubes. International Journal of Heat and Mass Transfer, 124, 929-942. View this article in WRRO
- Arfaie A, Burns AD, Dorrell RM, Ingham DB, Eggenhuisen JT & McCaffrey WD (2018) Optimisation of flow resistance and turbulent mixing over bed forms. Environmental Modelling & Software, 107, 141-147.
- Bouras I, Ma L, Ingham D & Pourkashanian M (2018) An improved k –ω turbulence model for the simulations of the wind turbine wakes in a neutral atmospheric boundary layer flow. Journal of Wind Engineering & Industrial Aerodynamics, 179, 358-368. View this article in WRRO
- Yang X, Ingham D, Ma L, Troiano M & Pourkashanian M (2018) Prediction of particle sticking efficiency for fly ash deposition at high temperatures. Proceedings of the Combustion Institute. View this article in WRRO
- Farias Moguel O, Szuhanszki J, Clements AG, Ingham DB, Ma L & Pourkashanian M (2018) Oscillating coal and biomass flames: A spectral and digital imaging approach for air and oxyfuel conditions. Fuel Processing Technology, 173, 243-252. View this article in WRRO
- Kaya MN, Kose F, Ingham D, Ma L & Pourkashanian M (2018) Aerodynamic performance of a horizontal axis wind turbine with forward and backward swept blades. Journal of Wind Engineering & Industrial Aerodynamics, 176, 166-173. View this article in WRRO
- Carcadea E, Varlam M, Ingham DB, Ismail MS, Patularu L, Marinoiu A & Schitea D (2018) The effects of cathode flow channel size and operating conditions on PEM fuel performance: A CFD modelling study and experimental demonstration. International Journal of Energy Research. View this article in WRRO
- Best T, Finney KN, Ingham DB & Pourkashanian M (2018) CO 2 -enhanced and humidified operation of a micro-gas turbine for carbon capture. Journal of Cleaner Production, 176, 370-381. View this article in WRRO
- Simoes MC, Hughes KJ, Ingham DB, Ma L & Pourkashanian M (2018) Predicting Speciation of Ammonia, Monoethanolamine, and Diethanolamine Using Only Ionic Radius and Ionic Charge. Industrial & Engineering Chemistry Research, 57(6), 2346-2352. View this article in WRRO
- Yang X, Clements A, Szuhánszki J, Huang XH, Farias Moguel O, Li J, Gibbins J, Liu ZH, Zheng CG, Ingham D, Ma L, Nimmo W & Pourkashanian M (2018) Prediction of the radiative heat transfer in small and large scale oxy-coal furnaces. Applied Energy, 211, 423-537. View this article in WRRO
- Aslam RM, Ingham DB, Ismail MS, Hughes KJ, Ma L & Pourkashanian M (2018) Simultaneous thermal and visual imaging of liquid water of the PEM fuel cell flow channels. Journal of the Energy Institute. View this article in WRRO
- Jaroenkhasemmeesuk C, Diego ME, Tippayawong N, Ingham DB & Pourkashanian M (2018) Simulation analysis of the catalytic cracking process of biomass pyrolysis oil with mixed catalysts: Optimization using the simplex lattice design. International Journal of Energy Research, 42(9), 2983-2996.
- Chen ZX, Ingham DB, Ismail MS, Ma L, Hughes KJ & Pourkashanian M (2018) Dynamics of liquid water in the anode flow channels of PEM fuel cells: A numerical parametric study. Journal of the Energy Institute.
- Ali U, Akram M, Font Palma C, Ingham D & Pourkashanian M (2017) Part-load Performance of Direct-firing and Co-firing of Coal and Biomass in a Power Generation System Integrated with a CO2 Capture and Compression System. Fuel. View this article in WRRO
- Xie P, Lu X, Yang X, Ingham D, Ma L & Pourkashanian M (2017) Characteristics of liquid flow in a rotating packed bed for CO 2 capture: A CFD analysis. Chemical Engineering Science, 172, 216-229. View this article in WRRO
- Orogbemi OM, Ingham DB, Ismail MS, Hughes KJ, Ma L & Pourkashanian M (2017) On the gas permeability of the microporous layer used in polymer electrolyte fuel cells. Journal of the Energy Institute. View this article in WRRO
- Ali U, Font-Palma C, Akram M, Agbonghae EO, Ingham DB & Pourkashanian M (2017) Comparative potential of natural gas, coal and biomass fired power plant with post - combustion CO2 capture and compression. International Journal of Greenhouse Gas Control, 63, 184-193. View this article in WRRO
- Aslam RM, Ingham DB, Ismail MS, Hughes KJ, Ma L & Pourkashanian M (2017) Simultaneous direct visualisation of liquid water in the cathode and anode serpentine flow channels of proton exchange membrane (PEM) fuel cells. Journal of the Energy Institute. View this article in WRRO
- Simoes MC, Hughes KJ, Ingham DB, Ma L & Pourkashanian M (2017) Temperature Dependence of the Parameters in the Pitzer Equations. Journal of Chemical & Engineering Data, 62(7), 2000-2013. View this article in WRRO
- Simoes MC, Hughes KJ, Ingham DB, Ma L & Pourkashanian M (2017) Estimation of the Thermochemical Radii and Ionic Volumes of Complex Ions. Inorganic Chemistry, 56(13), 7566-7573. View this article in WRRO
- Ismail MS, Ingham DB, Ma L, Hughes KJ & Pourkashanian M (2017) Effects of catalyst agglomerate shape in polymer electrolyte fuel cells investigated by a multi-scale modelling framework. Energy, 122, 420-430. View this article in WRRO
- Orogbemi OM, Ingham DB, Ismail MS, Hughes KJ, Ma L & Pourkashanian M (2017) Through-plane gas permeability of gas diffusion layers and microporous layer: Effects of carbon loading and sintering. Journal of the Energy Institute. View this article in WRRO
- Li J, Ingham D, Ma L, Wang N & Pourkashanian M (2017) Numerical Simulation of the Chemical Combination and Dissociation Reactions of Neutral Particles in a Rarefied Plasma Arc Jet. IEEE Transactions on Plasma Science, 45(3). View this article in WRRO
- Aboje AA, Hughes KJ, Ingham DB, Ma L, Williams A & Pourkashanian M (2017) Numerical study of a wake-stabilized propane flame in a cross-flow of air. Journal of the Energy Institute, 90(1), 145-158.
- Yang X, Ingham D, Ma L, Zhou H & Pourkashanian M (2017) Understanding the ash deposition formation in Zhundong lignite combustion through dynamic CFD modelling analysis. Fuel. View this article in WRRO
- Ali U, Hughes KJ, Ingham DB, Ma L & Pourkashanian M (2017) Effect of the CO2 enhancement on the performance of a micro gas turbine with a pilot-scale CO2 capture plant. Chemical Engineering Research and Design, 117, 11-23. View this article in WRRO
- Cross D, Hughes B, Ingham D & Ma L (2017) Enhancing the piston effect in underground railway tunnels. Tunnelling and Underground Space Technology, 61, 71-81. View this article in WRRO
- (2017) Modified integral equation solution of steady viscous flow in a bifurcating channel..
- Orogbemi OM, Ingham DB, Ismail MS, Hughes KJ, Ma L & Pourkashanian M (2016) The effects of the composition of microporous layers on the permeability of gas diffusion layers used in polymer electrolyte fuel cells. International Journal of Hydrogen Energy, 41(46), 21345-21351. View this article in WRRO
- Best T, Finney KN, Ingham DB & Pourkashanian M (2016) Impact of CO₂-enriched combustion air on micro-gas turbine performance for carbon capture. Energy, 115(1), 1138-1147. View this article in WRRO
- Ikonwa CA, Gale WF, Ingham DB, Ma L & Pourkashanian M (2016) Investigation of airfoil profiles for use in self-starting, small-scale, low reynolds number vertical axis wind turbines. International Journal of Environmental Sustainability, 12(3), 33-52. View this article in WRRO
- Flyagina IS, Hughes KJ, Mielczarek DC, Ingham DB & Pourkashanian M (2016) Identifying the Catalytic Active Sites in Heteroatom-Doped Graphene for the Oxygen Reduction Reaction. Fuel Cells.
- Simoes MC, Hughes KJ, Ingham DB, Ma L & Pourkashanian M (2016) Estimation of the Pitzer Parameters for 1–1, 2–1, 3–1, 4–1, and 2–2 Single Electrolytes at 25 °C. Journal of Chemical & Engineering Data, 61(7), 2536-2554. View this article in WRRO
- Ali U, Agbonghae EO, Hughes KJ, Ingham DB, Ma L & Pourkashanian M (2016) Techno-economic process design of a commercial-scale amine-based CO2 capture system for natural gas combined cycle power plant with exhaust gas recirculation. Applied Thermal Engineering, 103, 747-758. View this article in WRRO
- Yang X, Ingham D, Ma L, Srinivasan N & Pourkashanian M (2016) Ash deposition propensity of coals/blends combustion in boilers: a modeling analysis based on multi-slagging routes. Proceedings of the Combustion Institute, 36(3), 3341-3350. View this article in WRRO
- Owhondah R, Walker M, Ma L, Nimmo W, Poggio D & Pourkashanian M (2016) Assessment and parameter identification of simplified models to describe the kinetics of semi-continuous biomethane production from anaerobic digestion of green and food waste. Bioprocess and Biosystems Engineering, 39(6), 977-992. View this article in WRRO
- De Santis A, Ingham DB, Ma L & Pourkashanian M (2016) CFD analysis of exhaust gas recirculation in a micro gas turbine combustor for CO2 capture. Fuel, 173, 146-154. View this article in WRRO
- Ismail MS, Ingham DB, Hughes , Ma & Pourkashanian (2016) The effects of shape on the performance of cathode catalyst agglomerates in polymer electrolyte fuel cells: A micro-scale FEM study. International Journal of Numerical Methods for Heat and Fluid Flow, 26(3/4), 1145-1156. View this article in WRRO
- Sithole H, Cockerill TT, Hughes KJ, Ma L, Ingham DB, Porter RTJ & Pourkashanian M (2016) Developing an optimal electricity generation mix for the UK 2050 future. Energy, 100, 363-373.
- Yang X, Ingham D, Ma L, Williams A & Pourkashanian M (2016) Predicting ash deposition behaviour for co-combustion of palm kernel with coal based on CFD modelling of particle impaction and sticking. Fuel, 165, 41-49. View this article in WRRO
- Cross D, Hughes B, Ingham D & Ma L (2015) A validated numerical investigation of the effects of high blockage ratio and train and tunnel length upon underground railway aerodynamics. Journal of Wind Engineering and Industrial Aerodynamics, 146, 195-206. View this article in WRRO
- Groşan T, Revnic C, Pop I & Ingham DB (2015) Free convection heat transfer in a square cavity filled with a porous medium saturated by a nanofluid. International Journal of Heat and Mass Transfer, 87, 36-41.
- Ismail MS, Ingham DB, Hughes KJ, Ma L & pourkashanian (2015) Effective diffusivity of polymer electrolyte fuel cell gas diffusion layers: An overview and numerical study. International Journal of Hydrogen Energy, 40(34), 10994-11010.
- Fei Y, Black S, Szuhánszki J, Ma L, Ingham DB, Stanger PJ & Pourkashanian M (2015) Evaluation of the potential of retrofitting a coal power plant to oxy-firing using CFD and process co-simulation. Fuel Processing Technology, 131, 45-58. View this article in WRRO
- Lumb AB, Burns AD, Figueroa Rosette JA, Gradzik KB, Ingham DB & Pourkashanian M (2015) Computational fluid dynamic modelling of the effect of ventilation mode and tracheal tube position on air flow in the large airways. Anaesthesia.
- Tranter TG, Burns AD, Ingham DB & Pourkashanian M (2015) The effects of compression on single and multiphase flow in a model polymer electrolyte membrane fuel cell gas diffusion layer. International Journal of Hydrogen Energy, 40(1), 652-664.
- Palma CF, Hughes KJ, Ingham DB, Ma L & Pourkashanian M (2015) Impact of the operating conditions and position of exhaust gas recirculation on the performance of a micro gas turbine, 37, 2417-2422.
- Sheng Y, Sousani M, Ingham D & Pourkashanian M (2015) Recent Developments in Multiscale and Multiphase Modelling of the Hydraulic Fracturing Process. Mathematical Problems in Engineering, 2015, 1-15.
- Almohammadi KM, Ingham DB, Ma L & Pourkashanian M (2015) Modeling dynamic stall of a straight blade vertical axis wind turbine. Journal of Fluids and Structures, 57, 144-158.
- Almohammadi KM, Ingham DB, Ma L & Pourkashanian M (2014) 2-D-CFD Analysis of the Effect of Trailing Edge Shape on the Performance of a Straight-Blade Vertical Axis Wind Turbine. IEEE Transactions on Sustainable Energy.
- Ismail MS, Ingham DB, Hughes KJ, Ma L & Pourkashanian M (2014) An efficient mathematical model for air-breathing PEM fuel cells. Applied Energy, 135, 490-503.
- Alhazmi N, Ingham DB, Ismail MS, Hughes K, Ma L & Pourkashanian M (2014) The through-plane thermal conductivity and the contact resistance of the components of the membrane electrode assembly and gas diffusion layer in proton exchange membrane fuel cells. Journal of Power Sources, 270, 59-67.
- Flyagina IS, Hughes KJ, Pourkashanian M & Ingham DB (2014) DFT study of the oxygen reduction reaction on iron, cobalt and manganese macrocycle active sites. International Journal of Hydrogen Energy, 39(36), 21538-21546.
- Flyagina IS, Hughes KJ, Pourkashanian M & Ingham DB (2014) A Theoretical Study of Molecular Oxygen Chemisorption on N, B, or O Doped Carbon Edge Sites. Fuel Cells, 14(5), 709-719.
- Agbonghae EO, Hughes KJ, Ingham DB, Ma L & Pourkashanian M (2014) Optimal Process Design of Commercial-Scale Amine-Based CO 2 Capture Plants. Industrial & Engineering Chemistry Research, 53(38), 14815-14829. View this article in WRRO
- Lydon GP, Ingham DB & Mourshed MM (2014) Ultra clean ventilation system performance relating to airborne infections in operating theatres using CFD modelling. Building Simulation, 7(3), 277-287.
- Edmunds RK, Cockerill TT, Foxon TJ, Ingham DB & Pourkashanian M (2014) Technical benefits of energy storage and electricity interconnections in future British power systems. Energy, 70, 577-587.
- Agbonghae EO, Hughes KJ, Ingham DB, Ma L & Pourkashanian M (2014) A Semi-Empirical Model for Estimating the Heat Capacity of Aqueous Solutions of Alkanolamines for CO2 Capture. Industrial and Engineering Chemistry Research, 53(19), 8291-8301.
- Huang W, Wang Z-G, Yan L, Li S-B & Ingham DB (2014) Variation of inlet boundary conditions on the combustion characteristics of a typical cavity-based scramjet combustor. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 228(4), 627-638.
- Arfaie A, Burns AD, Dorrell RM, Eggenhuisen JT, Ingham DB & McCaffrey WD (2014) Optimised mixing and flow resistance during shear flow over a rib roughened boundary. International Communications in Heat and Mass Transfer, 58, 54-62.
- Fic AM, Ingham DB, Ginalski MK, Nowak AJ & Wrobel LC (2014) Modelling and optimisation of the operation of a radiant warmer. Medical Engineering & Physics, 36(1), 81-87.
- Stęchły K, Wecel G & B. Ingham D (2014) CFD modelling of air and oxy-coal combustion. International Journal of Numerical Methods for Heat & Fluid Flow, 24(4), 825-844.
- Millward-Hopkins JT, Tomlin AS, Ma L, Ingham DB & Pourkashanian M (2013) Assessing the potential of urban wind energy in a major UK city using an analytical model. Renewable Energy, 60, 701-710.
- Yam K, Burns AD, Ingham DB & McCaffrey WD (2013) Influence of Lift Force on the Settling Velocities of Rotating Particles in Two-Dimensional Shear Flow. Journal of Hydraulic Engineering, 139(12), 1277-1285.
- Ismail MS, Ingham DB, Hughes KJ, Ma L & Pourkashanian M (2013) Thermal modelling of the cathode in air-breathing PEM fuel cells. Applied Energy, 111, 529-537.
- Larsen KJ, Burns AD, Gubba SR, Ingham DB, Ma L, Pourkashanian M & Williams A (2013) Pulverised coal and biomass co-combustion: particle flow modelling in a swirl burner. JOURNAL OF THE ENERGY INSTITUTE, 86(4), 220-226.
- Almohammadi KM, Ingham DB, Ma L & Pourkashan M (2013) Computational fluid dynamics (CFD) mesh independency techniques for a straight blade vertical axis wind turbine. Energy, 58, 483-493.
- Millward-Hopkins JT, Tomlin AS, Ma L, Ingham DB & Pourkashanian M (2013) Mapping the wind resource over UK cities. Renewable Energy, 55, 202-211.
- Ingham D, Diggle CP, Berry I, Bristow CA, Hayward BE, Rahman N, Markham AF, Sheridan EG, Bonthron DT & Carr IM (2013) Simple Detection of Germline Microsatellite Instability for Diagnosis of Constitutional Mismatch Repair Cancer Syndrome. Human Mutation, 34(6), 847-852.
- Lawal MS, Fairweather M, Ingham DB, Ma L, Pourkashanian M, Williams A & Gogolek P (2013) CFD predictions of wake-stabilised jet flames in a cross-flow. Energy.
- Ismail MS, Ingham DB, Ma L & Pourkashanian M (2013) The contact resistance between gas diffusion layers and bipolar plates as they are assembled in proton exchange membrane fuel cells. Renewable Energy, 52, 40-45.
- Alhazmi N, Ismail MS, Ingham DB, Hughes KJ, Ma L & Pourkashanian M (2013) The in-plane thermal conductivity and the contact resistance of the components of the membrane electrode assembly in proton exchange membrane fuel cells. Journal of Power Sources, 241, 136-145.
- Hassan G, Pourkashanian M, Ingham D, Ma L, Newman P & Odedra A (2013) Predictions of CO and NOx emissions from steam cracking furnaces using GRI2.11 detailed reaction mechanism - A CFD investigation. Computers and Chemical Engineering, 58, 68-83.
- Degereji MU, Gubba SR, Ingham DB, Ma L, Pourkashanian M, Williams A & Williamson J (2013) Predicting the slagging potential of co-fired coal with sewage sludge and wood biomass. Fuel.
- Garba MU, Ingham DB, Ma L, Degereji MU, Pourkashanian M & Williams A (2013) Modelling of deposit formation and sintering for the co-combustion of coal with biomass. Fuel.
- Lawal MS, Fairweather M, Gogolek P, Gubba SR, Ingham DB, Ma L, Pourkashanian M & Williams A (2013) Large eddy simulations of wake-stabilised flares. Fuel Processing Technology, 112, 35-47.
- Szuhánszki J, Black S, Pranzitelli A, Ma L, Stanger PJ, Ingham DB & Pourkashanian M (2013) Evaluation of the Performance of a Power Plant Boiler Firing Coal, Biomass and a Blend Under Oxy-fuel Conditions as a CO2 Capture Technique. Energy Procedia, 37, 1413 - 1422-1413 - 1422-1413 - 1422-1413 - 1422.
- Huang W, Wang Z-G, Ingham DB, Ma L & Pourkashanian M (2013) Design exploration for a single expansion ramp nozzle (SERN) using data mining. Acta Astronautica, 83, 10-17.
- Black S, Szuhánszki J, Pranzitelli A, Ma L, Stanger PJ, Ingham DB & Pourkashanian M (2013) Effects of firing coal and biomass under oxy-fuel conditions in a power plant boiler using CFD modelling. Fuel, 113, 780-786.
- Ismail MS, Hughes KJ, Ingham DB, Ma L & Pourkashanian M (2012) Effect of PTFE loading of gas diffusion layers on the performance of proton exchange membrane fuel cells running at high-efficiency operating conditions. International Journal of Energy Research.
- Alhazmi N, Ingham DB, Ismail MS, Hughes KJ, Ma L & Pourkashanian M (2012) Effect of the anisotropic thermal conductivity of GDL on the performance of PEM fuel cells. International Journal of Hydrogen Energy.
- Millward-Hopkins JT, Tomlin AS, Ma L, Ingham DB & Pourkashanian M (2012) Aerodynamic Parameters of a UK City Derived from Morphological Data. Boundary-Layer Meteorology, 1-22.
- Basta N, Halliday G, Makin G, Feltbower R, Birch J, Bown N, Elliott M, Ingham D, Moreno L, Barone G, Pearson A, James PW, Tweddle DA & McNally RJQ (2012) FACTORS ASSOCIATED WITH RECURRENCE AND LENGTH OF SURVIVAL FOLLOWING RELAPSE IN PATIENTS WITH NEUROBLASTOMA: A PILOT STUDY. PEDIATRIC BLOOD & CANCER, 59(6), 1059-1059.
- Gubba SR, Ingham DB, Larsen KJ, Ma L, Pourkashanian M, Tan HZ, Williams A & Zhou H (2012) Numerical modelling of the co-firing of pulverised coal and straw in a 300 MWe tangentially fired boiler. Fuel Processing Technology, 104, 181-188.
- Degereji MU, Ingham DB, Ma L, Pourkashanian M & Williams A (2012) Numerical assessment of coals/blends slagging potential in pulverized coal boilers. Fuel, 102, 345-353.
- Garba MU, Ingham DB, Ma L, Porter RTJ, Pourkashnian M, Tan HZ & Williams A (2012) Prediction of Potassium Chloride Sulfation and Its Effect on Deposition in Biomass-Fired Boilers. Energy & Fuels, 26(11), 6501-6508.
- Gubba SR, Ingham DB, Larsen KJ, Ma L, Pourkashanian M, Qian X, Williams A & Yan Y (2012) Investigations of the transportation characteristics of biomass fuel particles in a horizontal pipeline through CFD modelling and experimental measurement. Biomass and Bioenergy, 46, 492-510.
- Idowu Oguntade H, E Andrews G, Burns AD, B Ingham D & Pourkashanian M (2012) Improved Trench Film Cooling With Shaped Trench Outlets. Journal of Turbomachinery, 135(2).
- Almohammadi K, Ingham D, Ma L & Pourkashanian M (2012) CFD sensitivity analysis of a straight-blade vertical axis wind turbine. Wind Engineering, 36(5), 571-588.
- Huang W, Pourkashanian M, Ma L, Ingham DB, Luo S-B & Wang Z-G (2012) Effect of geometric parameters on the drag of the cavity flameholder based on the variance analysis method. Aerospace Science and Technology, 21(1), 24-30.
- Wang S, Ingham DB, Ma L, Pourkashanian M & Tao Z (2012) Turbulence modeling of deep dynamic stall at relatively low Reynolds number. Journal of Fluids and Structures, 33, 191-209.
- Huang W, Ma L, Pourkashanian M, Ingham DB, Luo S-B, Liu J & Wang Z-G (2012) Flow-Field Analysis of a Typical Hydrogen-Fueled Dual-Mode Scramjet Combustor. JOURNAL OF AEROSPACE ENGINEERING, 25(3), 336-346.
- Ismail MS, Hughes KJ, Ingham DB, Ma L & Pourkashanian M (2012) Effects of anisotropic permeability and electrical conductivity of gas diffusion layers on the performance of proton exchange membrane fuel cells. Applied Energy, 95, 50-63.
- Ismail MS, Hassanpour A, Ingham DB, Ma L & Pourkashanian M (2012) On the compressibility of gas diffusion layers in proton exchange membrane fuel cells. Fuel Cells, 12(3), 391-397.
- Giorgio Serchi F, Peakall J, Ingham DB & Burns AD (2012) A numerical study of the triggering mechanism of a lock-release density current. European Journal of Mechanics - B/Fluids, 33, 25-39.
- Ryfa A, Ingham D & Bialecki RA (2012) Direct and Inverse Methods for an Air Jet Impingement. Numerical Heat Transfer, Part A: Applications, 61(7), 547-568.
- Millward-Hopkins JT, Tomlin AS, Ma L, Ingham D & Pourkashanian M (2012) The predictability of above roof wind resource in the urban roughness sublayer. Wind Energy, 15(2), 225-243.
- Huang W, Ma L, Pourkashanian M, Ingham DB, Luo S-B & Wang Z-G (2012) Parametric effects in a scramjet engine on the interaction between the air stream and the injection. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 226(3), 294-309.
- Millward-Hopkins JT, Tomlin AS, Ma L, Ingham D & Pourkashanian M (2011) Estimating Aerodynamic Parameters of Urban-Like Surfaces with Heterogeneous Building Heights. BOUNDARY-LAYER METEOROLOGY, 141(3), 443-465.
- Millward-Hopkins JT, Tomlin AS, Ma L, Ingham D & Pourkashanian M (2011) Erratum to: Estimating Aerodynamic Parameters of Urban-Like Surfaces with Heterogeneous Building Heights (Boundary-Layer Meteorol, 10.1007/s10546-011-9640-2). Boundary-Layer Meteorology, 141(3), 467-467.
- Yam K, McCaffrey WD, Ingham DB & Burns AD (2011) CFD modelling of selected laboratory turbidity currents. Journal of Hydraulic Research, 49(5), 657-666.
- Trucu D, Ingham DB & Lesnic D (2011) Reconstruction of the Space- and Time-Dependent Blood Perfusion Coefficient in Bio-Heat Transfer. Heat Transfer Engineering, 32(9), 800-810.
- Huang W, Ma L, Wang Z-G, Pourkashanian M, Ingham DB, Luo S-B & Lei J (2011) A parametric study on the aerodynamic characteristics of a hypersonic waverider vehicle. Acta Astronautica, 69(3-4), 135-140.
- Ismail MS, Borman D, Hughes KJ, Ingham DB, Ma L & Pourkashanian M (2011) On the through-plane permeability of microporous layer-coated gas diffusion layers used in proton exchange membrane fuel cells. International Journal of Hydrogen Energy, 36(16).
- Huang W, Wang ZG, Pourkashanian M, Ma L, Ingham DB, Luo SB, Lei J & Liu J (2011) Numerical investigation on the shock wave transition in a three-dimensional scramjet isolator. ACTA ASTRONAUT, 68(11-12), 1669-1675.
- Revnic C, Grosan T, Pop I & Ingham DB (2011) Magnetic field effect on the unsteady free convection flow in a square cavity filled with a porous medium with a constant heat generation. International Journal of Heat and Mass Transfer, 54(9-10), 1734-1742.
- Nazar R, Tham L, Pop I & Ingham DB (2011) Mixed Convection Boundary Layer Flow from a Horizontal Circular Cylinder Embedded in a Porous Medium Filled with a Nanofluid. Transport in Porous Media, 86(2), 517-536.
- Huang W, Pourkashanian M, Ma L, Ingham DB, Bin Luo S & Wang ZG (2011) Investigation on the flameholding mechanisms in supersonic flows: backward-facing step and cavity flameholder. J VISUAL-JAPAN, 14(1), 63-74.
- Giorgio Serchi F, Peakall J, Ingham DB & Burns AD (2011) A unifying computational fluid dynamics investigation on the river-like to river-reversed secondary circulation in submarine channel bends. Journal of Geophysical Research, 116(C6).
- Ismail MS, Damjanovic T, Hughes K, Ingham DB, Ma L, Pourkashanian M & Rosli M (2010) Through-Plane Permeability for Untreated and PTFE-Treated Gas Diffusion Layers in Proton Exchange Membrane Fuel Cells. J FUEL CELL SCI TECH, 7(5).
- Lawal MS, Fairweather M, Ingham DB, Ma L, Pourkashanian M & Williams A (2010) Numerical Study of Emission Characteristics of a Jet Flame in Cross-Flow. COMBUST SCI TECHNOL, 182(10), 1491-1510.
- Wang S, Ingham DB, Ma L & Pourkashanian M (2010) Numerical Investigation on Dynamic Stall of Low Reynolds Number Flow around Oscillating Airfoils. Computers and Fluids, 39(9), 1529-1541.
- Ismail MS, Damjanovic T, Ingham DB, Ma L & Pourkashanian M (2010) Effect of polytetrafluoroethylene-treatment and microporous layer-coating on the in-plane permeability of gas diffusion layers used in proton exchange membrane fuel cells. J POWER SOURCES, 195(19), 6619-6628.
- Vural Y, Ma L, Ingham DB & Pourkashanian M (2010) Comparison of the multicomponent mass transfer models for the prediction of the concentration overpotential for solid oxide fuel cell anodes. J POWER SOURCES, 195(15), 4893-4904.
- Wrobel LC, Ginalski MK, Nowak AJ, Ingham DB & Fic AM (2010) An overview of recent applications of computational modelling in neonatology. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 368(1920), 2817-2834.
- Vural Y, Akay D, Pourkashanian M & Ingham DB (2010) Modeling of an Intermediate Temperature Solid Oxide Fuel Cell Using the Adaptive Neuro-Fuzzy Inference System (ANFIS). J FUEL CELL SCI TECH, 7(3).
- Trucu D, Ingham DB & Lesnic D (2010) Inverse temperature-dependent perfusion coefficient reconstruction. International Journal of Non-Linear Mechanics, 45(5), 542-549.
- Fic AM, Ingham DB, Ginalski MK, Nowak AJ & Wrobel L (2010) Heat and mass transfer under an infant radiant warmer—development of a numerical model. Medical Engineering & Physics, 32(5), 497-504.
- Ismail MS, Damjanovic T, Ingham DB, Pourkashanian M & Westwood A (2010) Effect of polytetrafluoroethylene-treatment and microporous layer-coating on the electrical conductivity of gas diffusion layers used in proton exchange membrane fuel cells. J POWER SOURCES, 195(9), 2700-2708.
- Lok YY, Pop I & Ingham DB (2010) Oblique stagnation slip flow of a micropolar fluid. Meccanica, 45(2), 187-198.
- Rosli MI, Borman DJ, Ingham DB, Ismail MS, Ma L & Pourkashanian M (2010) Transparent PEM Fuel Cells for Direct Visualization Experiments. Journal of Fuel Cell Science and Technology, 7(6), 061015-061015.
- Trucu D, Ingham DB & Lesnic D (2010) Space-dependent perfusion coefficient identification in the transient bio-heat equation. Journal of Engineering Mathematics, 67(4), 307-315.
- Thomas MLR, Ingham DB & Pourkashanian M (2010) Prediction of the permeability of fibrous porous media using the lattice boltzmann method in conjuction with coarse numerical lattices. Open Transport Phenomena Journal, 2(1), 80-89.
- Borman D, Ingham DB, Johansson BT & Lesnic D (2009) The method of fundamental solutions for detection of cavities in EIT. Journal of Integral Equations and Applications, 21(3), 383-406.
- Revnic C, Pop I, Grosan T & Ingham DB (2009) Natural Convection in an Inclined Square Cavity with Heated and Cooled Adjacent Walls and Filled with a Porous Medium. The Open Transport Phenomena Journal, 1(1), 20-29.
- Lok YY, Pop I, Ingham DB & Amin N (2009) Mixed convection flow of a micropolar fluid near a non‐orthogonal stagnation‐point on a stretching vertical sheet. International Journal of Numerical Methods for Heat & Fluid Flow, 19(3/4), 459-483.
- Harris SD, Ingham DB & Pop I (2009) Impulsive Falkner‐Skan flow with constant wall heat flux: revisited. International Journal of Numerical Methods for Heat & Fluid Flow, 19(8), 1008-1037.
- Yam KS, Harris SD, Ingham DB & Pop I (2009) Boundary-layer flow of Reiner–Philippoff fluids past a stretching wedge. International Journal of Non-Linear Mechanics, 44(10), 1056-1062.
- Vural Y, Ingham DB & Pourkashanian M (2009) Performance prediction of a proton exchange membrane fuel cell using the ANFIS model. INT J HYDROGEN ENERG, 34(22), 9181-9187.
- Grosan T, Pop I, Revnic C & Ingham DB (2009) Magnetohydrodynamic oblique stagnation-point flow. Meccanica, 44(5), 565-572.
- Revnic C, Grosan T, Pop I & Ingham DB (2009) Free convection in a square cavity filled with a bidisperse porous medium. International Journal of Thermal Sciences, 48(10), 1876-1883.
- Lok YY, Pop I & Ingham DB (2009) Steady two-dimensional periodic motion of a micropolar fluid near an infinite array of moving walls. ZAMM, 89(7), 570-586.
- Peronski L, Bratley R, Ingham DB, Ma L, Pourkashanian M & Taylor S (2009) Fluid flow analysis and design of a flow distributor in a domestic gas boiler using a commercial CFD software. World Academy of Science, Engineering and Technology, 40, 247-255.
- Baytas AC, Baytas AF, Ingham DB & Pop I (2009) Double diffusive natural convection in an enclosure filled with a step type porous layer: Non-Darcy flow. International Journal of Thermal Sciences, 48(4), 665-673.
- Harris SD, Ingham DB & Pop I (2009) Mixed Convection Boundary-Layer Flow Near the Stagnation Point on a Vertical Surface in a Porous Medium: Brinkman Model with Slip. Transport in Porous Media, 77(2), 267-285.
- Grosan T, Revnic C, Pop I & Ingham DB (2009) Magnetic field and internal heat generation effects on the free convection in a rectangular cavity filled with a porous medium. International Journal of Heat and Mass Transfer, 52(5-6), 1525-1533.
- Onyango TTM, Ingham DB & Lesnic D (2009) Inverse reconstruction of boundary condition coefficients in one-dimensional transient heat conduction. Applied Mathematics and Computation, 207(2), 569-575.
- Onyango TTM, Ingham DB & Lesnic D (2009) Reconstruction of boundary condition laws in heat conduction using the boundary element method. Computers & Mathematics with Applications, 57(1), 153-168.
- Cimpean D, Pop I, Ingham DB & Merkin JH (2009) Fully Developed Mixed Convection Flow Between Inclined Parallel Plates Filled with a Porous Medium. Transport in Porous Media, 77(1), 87-102.
- Onyango TTM, Ingham DB, Lesnic D & Slodička M (2009) Determination of a time-dependent heat transfer coefficient from non-standard boundary measurements. Mathematics and Computers in Simulation, 79(5), 1577-1584.
- Gasser Hassan , Pourkashanian M, Ingham D, Ma L & Taylor S (2009) Reduction in Pollutants Emissions From Domestic Boilers—Computational Fluid Dynamics Study. Journal of Thermal Science and Engineering Applications, 1(1), 011007-011007.
- Harris SD, Ingham DB & Pop I (2008) Unsteady heat transfer in impulsive Falkner–Skan flows: constant wall heat flux case. Acta Mechanica, 201(1-4), 185-196.
- Trucu D, Ingham DB & Lesnic D (2008) Inverse space-dependent perfusion coefficient identification. Journal of Physics: Conference Series, 135, 012098-012098.
- Onyango TTM, Ingham DB & Lesnic D (2008) Restoring boundary conditions in heat conduction. Journal of Engineering Mathematics, 62(1), 85-101.
- Zeb A, Ingham DB & Lesnic D (2008) The method of fundamental solutions for a biharmonic inverse boundary determination problem. Computational Mechanics, 42(3), 371-379.
- Onyango TTM, Ingham DB & Lesnic D (2008) Reconstruction of heat transfer coefficients using the boundary element method. Computers & Mathematics with Applications, 56(1), 114-126.
- Corney RKT, Peakall J, Parsons DR, Elliott L, Best JL, Thomas RE, Keevil GM, Ingham DB & Amos KJ (2008) Reply to Discussion of Imran et al. on “The orientation of helical flow in curved channels” by Corney et al., Sedimentology, 53, 249-257. Sedimentology, 55(1), 241-247.
- (2008) Numerical identification of the hydraulic conductivity of composite materials. CMES - Computer Modeling in Engineering and Sciences, 25(2), 69-79.
- Mera NS, Elliott L & Ingham DB (2007) The use of neural network approximation models to speed up the optimisation process in electrical impedance tomography. Computer Methods in Applied Mechanics and Engineering, 197(1-4), 103-114.
- Curteanu AE, Elliott L, Ingham DB & Lesnic D (2007) Laplacian decomposition and the boundary element method for solving Stokes problems. Engineering Analysis with Boundary Elements, 31(6), 501-513.
- Lesnic D, Harris SD, Elliott L, Mustata R, Clennell MB & Ingham DB (2007) Identification of the Hydraulic Properties of Heterogeneous Rocks from Laboratory Flow-Pump Experiments. Journal of Porous Media, 10(1), 71-92.
- Rap A, Elliott L, Ingham DB, Lesnic D & Wen X (2007) The inverse source problem for the variable coefficients convection-diffusion equation. Inverse Problems in Science and Engineering, 15(5), 413-440.
- Smolka J, Ingham DB, Elliott L & Nowak AJ (2007) Enhanced numerical model of performance of an encapsulated three-phase transformer in laboratory environment. Applied Thermal Engineering, 27(1), 156-166.
- Carcadea E, Ene H, Ingham DB, Lazar R, Ma L, Pourkashanian M & Stefanescu I (2007) A computational fluid dynamics analysis of a PEM fuel cell system for power generation. INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 17(3), 302-312.
- Elliott L, Ingham DB, Kyne AG, Mera NS, Pourkashanian M & Wilson CW (2007) Optimization of a surrogate reduced aviation fuel-air reaction mechanism using a genetic algorithm. Clean Air, 8(1), 1-24.
- (2006) The detection of super-elliptical inclusions in infrared computerised axial tomography. CMES - Computer Modeling in Engineering and Sciences, 15(2), 107-114.
- Marin L, Elliott L, Heggs PJ, Ingham DB, Lesnic D & Wen X (2006) Parameter identification in Helmholtz-type equations with a variable coefficient using a regularized DRBEM. Inverse Problems in Science and Engineering, 14(8), 837-858.
- ELLIOTT L, INGHAM DB & WRIGHT SD (2006) Determination of the Atmospheric Boundary-Layer within the Urban Environment. JSME International Journal Series B, 49(3), 556-566.
- Marin L, Elliott L, Heggs PJ, Ingham DB, Lesnic D & Wen X (2006) Dual reciprocity boundary element method solution of the Cauchy problem for Helmholtz-type equations with variable coefficients. Journal of Sound and Vibration, 297(1-2), 89-105.
- (2006) Performance characteristics of personal samplers in still and moving air. Iranian Journal of Chemistry and Chemical Engineering, 25(3), 1-8.
- Cimpean D, Merkin JH, Pop I & Ingham DB (2006) On a Free Convection Problem Over a Vertical Flat Surface in a Porous Medium. Transport in Porous Media, 64(3), 393-411.
- Marin L, Wen X, Elliott L, Ingham DB, Lesnic D & Heggs PJ (2006) PARAMETER IDENTIFICATION IN TWO-DIMENSIONAL FINS USING THE BOUNDARY ELEMENT METHOD. Numerical Heat Transfer, Part A: Applications, 50(4), 315-344.
- CORNEY RKT, PEAKALL J, PARSONS DR, ELLIOTT L, AMOS KJ, BEST JL, KEEVIL GM & INGHAM DB (2006) The orientation of helical flow in curved channels. Sedimentology, 53(2), 249-257.
- Elliott L, Ingham DB, Kyne AG, Mera NS, Pourkashanian M & Wilson CW (2006) A novel approach to mechanism reduction optimization for an aviation fuel/air reaction mechanism using a genetic algorithm. J ENG GAS TURB POWER, 128(2), 255-263.
- Rap A, Elliott L, Ingham DB, Lesnic D & Wen X (2006) An inverse source problem for the convection‐diffusion equation. International Journal of Numerical Methods for Heat & Fluid Flow, 16(2), 125-150.
- Kyne AG, Mera NS, Elliott L, Ingham DB, Pourkashanian M & Whittaker S (2006) Reaction mechanism reduction and optimisation for modelling aviation fuel oxidation using standard and hybrid genetic algorithms. Computers & Chemical Engineering, 30(5), 889-900.
- Hardy RJ, Lane SN, Lawless MR, Best JL, Elliott L & Ingham DB (2005) Development and testing of a numerical code for treatment of complex river channel topography in three-dimensional CFD models with structured grids. Journal of Hydraulic Research, 43(5), 468-480.
- Ma L, Ingham DB, Pourkashanian M & Carcadea E (2005) Review of the Computational Fluid Dynamics modeling of fuel cells. Journal of Fuel Cell Science and Technology, 2, 246-257.
- Carcadea E, Ene H, Ingham DB, Lazar R, Ma L, Pourkashanian M & Stefanescu I (2005) Numerical simulation of mass and charge transfer for a PEM fuel cell. INT COMMUN HEAT MASS, 32(10), 1273-1280.
- Mera NS, Elliott L & Ingham DB (2005) Boundary identification for a 3D Laplace equation using a genetic algorithm. Computer Methods in Applied Mechanics and Engineering, 194(42-44), 4411-4424.
- Ingham DB, Pourkashanian M, Mera NS, Kyne AG, Wade AS & Whittaker S (2005) Genetic-algorithm optimization of a chemistry mechanism for oxidation of liquid hydrocarbons. AIAA Journal, 43(10).
- Pourkashanian M, Mera NS, Ingham DB, Elliott L, Kyne AG & Wilson CW (2005) The use of ignition delay time in genetic algorithms optimisation of chemical kinetics reaction mechanisms.. Engineering Applications of Artificial Intelligence, 18, 825-831.
- Marin L, Elliott L, Heggs PJ, Ingham DB, Lesnic D & Wen X (2005) Two-dimensional thermal analysis of a polygonal fin with two tubes on a square pitch. International Journal of Heat and Mass Transfer, 48(14), 3018-3033.
- Elliott L, Ingham DB, Kyne AG, Mera NS, Pourkashanian M & Wilson CW (2005) Reaction mechanism reduction and optimization using genetic algorithms. IND ENG CHEM RES, 44(4), 658-667.
- Wade AS, Kyne AG, Mera NS, Pourkashanian M, Ingham DB & Whittaker S (2004) Optimization of the Arrhenius parameters in a pseudo-detailed mechanism for jet fuel thermal oxidation using genetic and simplex algorithms. Energy & Fuels, 18(6), 1896-1908.
- Rap A, Elliott L, Ingham DB, Lesnic D & Wen X (2004) DRBEM for Cauchy convection-diffusion problems with variable coefficients. Engineering Analysis with Boundary Elements, 28(11), 1321-1333.
- Marin L, Elliott L, Heggs PJ, Ingham DB, Lesnic D & Wen X (2004) BEM solution for the Cauchy problem associated with Helmholtz-type equations by the Landweber method. Engineering Analysis with Boundary Elements, 28(9), 1025-1034.
- Marin L, Elliott L, Heggs PJ, Ingham DB, Lesnic D & Wen X (2004) BEM solution for the Cauchy problem associated with Helmholtz-type equations by the Landweber method. ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS, 28(9), 1025-1034.
- Marin L, Elliott L, Heggs PJ, Ingham DB, Lesnic D & Wen X (2004) Comparison of regularization methods for solving the Cauchy problem associated with the Helmholtz equation. International Journal for Numerical Methods in Engineering, 60(11), 1933-1947.
- Lesnic D, Ingham DB, Pop I & Storr C (2004) Free convection boundary-layer flow above a nearly horizontal surface in a porous medium with newtonian heating. Heat and Mass Transfer, 40(9).
- Elliott L, Ingham DB, Kyne AG, Mera NS, Pourkashanian M & Wilson CW (2004) A novel approach to the optimization of reaction rate parameters for methane combustion using multi-objective genetic algorithms. J ENG GAS TURB POWER, 126(3), 455-464.
- Vaszi AZ, Elliott L, Ingham DB & Pop I (2004) Conjugate free convection from a vertical plate fin with a rounded tip embedded in a porous medium. International Journal of Heat and Mass Transfer, 47(12-13), 2785-2794.
- Marin L, Elliott L, Ingham DB & Lesnic D (2004) The boundary element method for the numerical recovery of a circular inhomogeneity in an elliptic equation. Engineering Analysis with Boundary Elements, 28(4), 413-419.
- Power H & Ingham DB (2004) Special issue: application of the BEM to interfacial phenomena. Engineering Analysis with Boundary Elements, 28(4), 293-293.
- Mera NS, Elliott L & Ingham DB (2004) Numerical solution of a boundary detection problem using genetic algorithms. Engineering Analysis with Boundary Elements, 28(4), 405-411.
- Manik K, Wen X & Ingham DB (2004) Gravitational fluid flow induced in a three layer stratified fluid by two submerged sinks or sources with stagnation points on the free surfaces. Engineering Analysis with Boundary Elements, 28(4), 359-373.
- Marin L, Elliott L, Ingham DB & Lesnic D (2004) Parameter identification in isotropic linear elasticity using the boundary element method. Engineering Analysis with Boundary Elements, 28(3), 221-233.
- Farcas A, Elliott L, Ingham DB & Lesnic D (2004) An inverse dual reciprocity method for hydraulic conductivity identification in steady groundwater flow. Advances in Water Resources, 27(3), 223-235.
- Elliott L, Ingham DB & Mera NS (2004) A multi-population genetic algorithm approach for solving ill-posed problems. Computational Mechanics, 33(4), 254-262.
- Lane SN, Hardy RJ, Elliott L & Ingham DB (2004) Numerical modeling of flow processes over gravelly surfaces using structured grids and a numerical porosity treatment. Water Resources Research, 40(1).
- Elliott L, Ingham DB, Kyne AG, Mera NS, Pourkashanian M & Wilson CW (2004) Genetic algorithms for optimisation of chemical kinetics reaction mechanisms. Progress in Energy and Combustion Science, 30(3), 297-328.
- Wilson CW (2004) An informed operator based genetic algorithm for tuning the reaction rate parameters of chemical kinetics mechanisms. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 3103, 945-956.
- Farcas A, Elliott L, Ingham DB & Lesnic D (2003) The dual reciprocity boundary element method for solving Cauchy problems associated to the Poisson equation. Engineering Analysis with Boundary Elements, 27(10), 955-962.
- Vaszi AZ, Elliott L, Ingham DB & Pop I (2003) CONJUGATE FREE CONVECTION FROM VERTICAL FINS EMBEDDED IN A POROUS MEDIUM. Numerical Heat Transfer, Part A: Applications, 44(7), 743-770.
- Aly EH, Elliott L & Ingham DB (2003) Mixed convection boundary-layer flow over a vertical surface embedded in a porous medium. European Journal of Mechanics - B/Fluids, 22(6), 529-543.
- Vaszi AZ, Elliott L, Ingham DB & Pop I (2003) Conjugate free convection from vertical fins embedded in a porous medium. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 44(7), 743-770.
- Mera NS, Elliott L, Ingham DB & Lesnic D (2003) A comparison of different regularization methods for a Cauchy problem in anisotropic heat conduction. International Journal of Numerical Methods for Heat & Fluid Flow, 13(5), 528-546.
- (2003) A new model for viscous dissipation in porous media across a range of permeability values. Transport in Porous Media, 53(1), 117-122.
- Pop I, Harris SD, Ingham DB & Rhea S (2003) Three-dimensional stagnation point free convection on a reactive surface in a porous medium. International Journal of Energy Research, 27(10), 919-939.
- Al-Hadhrami AK, Elliott L, Ingham DB & Wen X (2003) Flows through horizontal channels of porous materials. International Journal of Energy Research, 27(10), 875-889.
- Bejan A, Ingham DB & Mamut E (2003) Special issue on heat and mass transfer in porous media - Foreword. INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 27(10), 857-857.
- Marin L, Elliott L, Ingham DB & Lesnic D (2003) Identification of material properties and cavities in two-dimensional linear elasticity. Computational Mechanics, 31(3-4), 293-300.
- (2003) Conjugate gradient-boundary element solution to the Cauchy problem for Helmholtz-type equations. Computational Mechanics, 31(3-4), 367-377.
- Robinson M & Ingham DB (2003) Design and operating parameters for push-pull ventilation of open surface tanks. International Journal of Energy Research, 27(8), 757-770.
- Mera NS, Elliott L & Ingham DB (2003) On the use of Genetic Algorithms for Solving Ill-Posed Problems. Inverse Problems in Engineering, 11(2), 105-121.
- Elliott L, Ingham DB, Kyne AG, Mera NS, Pourkashanian M & Wilson CW (2003) Incorporation of physical bounds on rate parameters for reaction mechanism optimization using genetic algorithms. COMBUST SCI TECHNOL, 175(4), 619-648.
- Mera NS, Elliott L & Ingham DB (2003) A Real Coded Genetic Algorithm Approach for Detection of Subsurface Isotropic and Anisotropic Inclusions. Inverse Problems in Engineering, 11(2), 157-173.
- Farcas A, Elliott L, Ingham DB, Lesnic D & Mera NS (2003) A Dual Reciprocity Boundary Element Method for the Regularized Numerical Solution of the Inverse Source Problem Associated to the Poisson Equation. Inverse Problems in Engineering, 11(2), 123-139.
- Elliott L, Ingham DB, Kyne AG, Mera NS, Pourkashanian M & Wilson CW (2003) Multiobjective genetic algorithm optimization for calculating the reaction rate coefficients for hydrogen combustion. IND ENG CHEM RES, 42(6), 1215-1224.
- Marin L, Elliott L, Heggs PJ, Ingham DB, Lesnic D & Wen X (2003) An alternating iterative algorithm for the Cauchy problem associated to the Helmholtz equation. Computer Methods in Applied Mechanics and Engineering, 192(5-6), 709-722.
- Wilson CW (2003) Optimisation of reaction mechanisms for aviation fuels using a multi-objective genetic algorithm. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 2724, 2046-2057.
- Harris SD, Ingham DB & Pop I (2002) Unsteady heat transfer in impulsive Falkner–Skan flows: Constant wall temperature case. European Journal of Mechanics - B/Fluids, 21(4), 447-468.
- Mera NS, Elliott L & Ingham DB (2002) Detection of subsurface cavities in IR-CAT by a real coded genetic algorithm. Applied Soft Computing, 2(2), 129-139.
- Al-Hadhrami AK, Elliott L & Ingham DB (2002) Combined free and forced convection in vertical channels of porous media. Transport in Porous Media, 49(3), 265-289.
- Zeb A, Elliott L, Ingham DB & Lesnic D (2002) An inverse Stokes problem using interior pressure data. Engineering Analysis with Boundary Elements, 26(9), 739-745.
- Lane SN, Hardy RJ, Elliott L & Ingham DB (2002) High-resolution numerical modelling of three-dimensional flows over complex river bed topography. Hydrological Processes, 16(11), 2261-2272.
- Mera NS, Elliott L & Ingham DB (2002) AN INVERSION METHOD WITH DECREASING REGULARIZATION FOR THE BACKWARD HEAT CONDUCTION PROBLEM. Numerical Heat Transfer, Part B: Fundamentals, 42(3), 215-230.
- Mera NS, Elliott L & Ingham DB (2002) An inversion method with decreasing regularization for the backward heat conduction problem. NUMERICAL HEAT TRANSFER PART B-FUNDAMENTALS, 42(3), 215-230.
- (2002) The numerical modelling of a two-dimensional local exhaust system associated with an inclined jet flow. Journal of Engineering Mathematics, 43(2-4), 367-384.
- Marin L, Elliott L, Ingham DB & Lesnic D (2002) Boundary Element Regularisation Methods for Solving the Cauchy Problem in Linear Elasticity. Inverse Problems in Engineering, 10(4), 335-357.
- Manik K, Wen X & Ingham D (2002) The flow induced in a three layer stratified fluid by a submerged sink or source with stagnation points on the free surfaces. Computers & Fluids, 31(8), 891-910.
- (2002) Retrieval of spacewise dependent hydraulic properties of anisotropic rocks from transient flow experiments. Transport in Porous Media, 48(1), 79-99.
- Ingham DB & Ma L (2002) Predicting the performance of air cyclones. International Journal of Energy Research, 26(7), 633-652.
- Marin L, Elliott L, Ingham DB & Lesnic D (2002) An iterative boundary element algorithm for a singular Cauchy problem in linear elasticity. Computational Mechanics, 28(6), 479-488.
- Hancu S, Ghinda T, Ma L, Lesnic D & Ingham DB (2002) Numerical modelling and experimental investigation of the fluid flow and contaminant dispersion in a channel. International Journal of Heat and Mass Transfer, 45(13), 2707-2718.
- Vaszi AZ, Elliott L, Ingham DB & Pop I (2002) Conjugate free convection above a heated finite horizontal flat plate embedded in a porous medium. International Journal of Heat and Mass Transfer, 45(13), 2777-2795.
- Wright SD, Elliott L & Ingham DB (2002) The implementation of land use and relief height data in predicting the evolution of the atmospheric boundary-layer within the urban environment. Environmental Modelling & Software, 17(3), 229-235.
- Ma L, Ashworth PJ, Best JL, Elliott L, Ingham DB & Whitcombe LJ (2002) Computational fluid dynamics and the physical modelling of an upland urban river. Geomorphology, 44(3-4), 375-391.
- Mera NS, Elliott L, Ingham DB & Lesnic D (2002) Singularities in anisotropic steady-state heat conduction using a boundary element method. International Journal for Numerical Methods in Engineering, 53(10), 2413-2427.
- Mera NS, Elliott L, Ingham DB & Lesnic D (2002) An iterative algorithm for singular Cauchy problems for the steady state anisotropic heat conduction equation. Engineering Analysis with Boundary Elements, 26(2), 157-168.
- (2002) Thermal capacity effect on transient free convection adjacent to a vertical surface in a porous medium. Transport in Porous Media, 46(1), 1-18.
- Vaszi AZ, Ingham DB, Lesnic D, Munslow D & Pop I (2001) Conjugate Free Convection from a Slightly Inclined Plate Embedded in a Porous Medium. ZAMM, 81(7), 465-479.
- (2001) Analytical solutions of fluid flows through composite channels. Journal of Porous Media, 4(2), 149-163.
- Lonyangapuo JK, Elliott L, Ingham DB & Wen X (2001) Solving free surface fluid flow problems by the minimal kinetic energy functional. International Journal for Numerical Methods in Fluids, 37(5), 577-600.
- (2001) Fluid flows through two-dimensional channels of composite materials. Transport in Porous Media, 45(2), 283-302.
- Marin L, Elliott L, Ingham D & Lesnic D (2001) Boundary element method for the Cauchy problem in linear elasticity. Engineering Analysis with Boundary Elements, 25(9), 783-793.
- Mera NS, Elliott L, Ingham DB & Lesnic D (2001) Use of the boundary element method to determine the thermal conductivity tensor of an anisotropic medium. International Journal of Heat and Mass Transfer, 44(21), 4157-4167.
- Vaszi AZ, Elliott L, Ingham DB & Pop I (2001) Conjugate free convection above a cooled finite horizontal flat plate embedded in a porous medium. International Communications in Heat and Mass Transfer, 28(5), 703-712.
- Li J, Ingham DB & Pop I (2001) Natural convection from a vertical flat plate with a surface temperature oscillation. International Journal of Heat and Mass Transfer, 44(12), 2311-2322.
- Mera NS, Elliott L, Ingham DB & Lesnic D (2001) An iterative boundary element method for solving the one-dimensional backward heat conduction problem. International Journal of Heat and Mass Transfer, 44(10), 1937-1946.
- Harris SD, Ingham DB & Pop I (2001) Transient boundary-layer heat transfer from a flat plate subjected to a sudden change in heat flux. European Journal of Mechanics - B/Fluids, 20(2), 187-204.
- Pecher R, Harris SD, Knipe RJ, Elliott L & Ingham DB (2001) New formulation of the Green element method to maintain its second-order accuracy in 2D/3D. Engineering Analysis with Boundary Elements, 25(3), 211-219.
- Mera NS, Elliott L, Ingham DB & Lesnic D (2001) A comparison of boundary element method formulations for steady state anisotropic heat conduction problems. Engineering Analysis with Boundary Elements, 25(2), 115-128.
- Harris , Bradean , Ingham , Russell , Pourmohammadi & Wen (2001) Modelling of an aerodynamic technique of forming web structures in textile industries: I. Turbulent air flow past filters. Mathematical Engineering in Industry, 8(2), 137-160.
- Mera NS, Elliott L, Ingham DB & Lesnic D (2000) An iterative bem for the cauchy steady state heat conduction problem in an anisotropic medium with unknown thermal conductivity tensor. Inverse Problems in Engineering, 8(6), 579-607.
- Lesnic D (2000) An iterative boundary element method for the solution of a cauchy steady state heat conduction problem. CMES - Computer Modeling in Engineering and Sciences, 1(3), 100-106.
- Elliott L, Lesnic D & Ingham DB (2000) An inverse boundary element method for determining the hydraulic conductivity in anisotropic rocks. CMES - Computer Modeling in Engineering and Sciences, 1(3), 107-116.
- (2000) Free convection from a horizontal surface in a porous medium with newtonian heating. Journal of Porous Media, 3(3), 227-235.
- (2000) A study of the airflow and fiber dynamics in the transport chamber of a sifting air-laying system: Part 1. International Nonwovens Journal, 9(2), 31-34.
- (2000) A study of the airflow and fibre dynamics in the transport chamber of a sifting air-laying system: Part 2 - fiber dynamics. International Nonwovens Journal, 9(3), 22-26.
- Wilson CW, Pourkashanian M, Ingham DB, Elliott L & Harris SD (2000) The optimisation of reaction rate parameters for chemical kinetic modelling of combustion using genetic algorithms. Computer Methods in Applied Mechanics and Engineering, 190(8-10).
- Wen X & Ingham D (2000) ASPIRATION EFFICIENCY OF A THIN-WALLED CYLINDRICAL AEROSOL SAMPLER AT YAW ORIENTATIONS WITH RESPECT TO THE WIND. Journal of Aerosol Science, 31(11), 1355-1365.
- Harris SD, Ingham DB & Pop I (2000) Transient free convection near the lower stagnation point of a cylindrical surface subjected to a sudden change in surface temperature. International Communications in Heat and Mass Transfer, 27(8), 1091-1100.
- Makhkamov KK & Ingham DB (2000) Closure to “Discussion: ‘Analysis of the Working Process and Mechanical Losses in a Stirling Engine for a Solar Power Unit’ ” (Prieto, J. I., 2000, ASME J. Solar Energ. Eng., 122, p. 207). Journal of Solar Energy Engineering, 122(4), 208-208.
- Mera NS, Elliott L, Ingham DB & Lesnic D (2000) The boundary element solution of the Cauchy steady heat conduction problem in an anisotropic medium. International Journal for Numerical Methods in Engineering, 49(4), 481-499.
- Ma L, Ingham DB & Wen X (2000) NUMERICAL MODELLING OF THE FLUID AND PARTICLE PENETRATION THROUGH SMALL SAMPLING CYCLONES. Journal of Aerosol Science, 31(9), 1097-1119.
- (2000) An Analytical, Numerical, and Experimental Comparison of the Fluid Velocity in the Vicinity of an Open Tank with One and Two Lateral Exhaust Slot Hoods and a Uniform Crossdraft. The Annals of Occupational Hygiene.
- (2000) Theoretical and numerical predictions of two-dimensional Aaberg slot exhaust hoods. The Annals of Occupational Hygiene.
- Trevelyan PMJ, Elliott L & Ingham DB (2000) Potential flow in a semi-infinite channel with multiple sub-channels using the Schwarz–Christoffel transformation. Computer Methods in Applied Mechanics and Engineering, 189(1), 341-359.
- Wen X, Hunt G & Ingham D (2000) A boundary integral technique for the numerical modelling of the air flow for the Aaberg exhaust system. Engineering Analysis with Boundary Elements, 24(6), 477-484.
- Zeb A, Elliott L, Ingham DB & Lesnic D (2000) Boundary element two-dimensional solution of an inverse Stokes problem. Engineering Analysis with Boundary Elements, 24(1), 75-88.
- (2000) Transient free convection from a horizontal surface in a porous medium subjected to a sudden change in surface heat flux. Transport in Porous Media, 39(1), 97-117.
- (2000) A numerical method for Schwarz-Christoffel conformal transformation with application to potential flow in channels with oblique sub-channels. CMES - Computer Modeling in Engineering and Sciences, 1(3), 117-122.
- Lesnic D, Elliott L & Ingham DB (2000) Identifiability of distributed parameters for high-order quasi-linear differential equations. Journal of Inverse and Ill-posed Problems, 8(1), 1-22.
- Lonyangapuo JK, Elliott L, Ingham DB & Wen X (2000) Use of an extremal functional in solving for an unknown bottom surface given a free surface profile. Engineering Analysis with Boundary Elements, 24(1), 17-30.
- Mera NS, Elliott L, Ingham DB & Lesnic D (2000) An iterative boundary element method for the solution of a Cauchy steady state heat conduction problem. CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, 1(3), 101-106.
- Makhkamov KK & Ingham DB (1999) Two-Dimensional Model of the Air Flow and Temperature Distribution in a Cavity-Type Heat Receiver of a Solar Stirling Engine. Journal of Solar Energy Engineering, 121(4), 210-210.
- Zeb A, Elliott L, Ingham DB & Lesnic D (1999) A comparison of different methods to solve inverse biharmonic boundary value problems. International Journal for Numerical Methods in Engineering, 45(12), 1791-1806.
- Lesnic D, Ingham DB & Pop I (1999) Free convection boundary-layer flow along a vertical surface in a porous medium with Newtonian heating. International Journal of Heat and Mass Transfer, 42(14), 2621-2627.
- Lonyangapuo JK, Elliott L, Ingham DB & Wen X (1999) Retrieval of the shape of the bottom surface of a channel when the free surface profile is given. Engineering Analysis with Boundary Elements, 23(5-6), 457-470.
- Makhkamov KK & Ingham DB (1999) Analysis of the Working Process and Mechanical Losses in a Stirling Engine for a Solar Power Unit. Journal of Solar Energy Engineering, 121(2), 121-121.
- Miskin I, Elliott L & Ingham DB (1999) Stability in a fully-developed two-dimensional resuspension flow. International Journal of Multiphase Flow, 25(3), 501-530.
- Lesnic D (1999) Analysis of coefficient identification problems associated to the inverse Euler-Bernoulli beam theory. IMA Journal of Applied Mathematics, 62(2), 101-116.
- Harris SD, Ingham DB & Pop I (1999) Unsteady mixed convection boundary-layer flow on a vertical surface in a porous medium. International Journal of Heat and Mass Transfer, 42(2), 357-372.
- Lesnic D, Elliott L, Ingham DB & Zeb A (1999) A numerical method for an inverse biharmonic problem. Inverse Problems in Engineering, 7(5), 409-431.
- Lesnic D, Elliott L, Ingham DB, Clennell B & Knipe RJ (1999) The identification of the piecewise homogeneous thermal conductivity of conductors subjected to a heat flow test. International Journal of Heat and Mass Transfer, 42(1), 143-152.
- Lesnic D, Elliott L, Ingham DB, Knipe RJ & Clennell B (1998) An inverse problem to determine the piecewise homogeneous hydraulic conductivity within rocks. Geological Society, London, Special Publications, 147(1), 261-268.
- Hunt GR & Ingham DB (1998) Laminar and turbulent radial jets. Acta Mechanica, 127(1-4), 25-38.
- Wright SD (1998) The Adaptation of the Atmospheric Boundary Layer to a Change in Surface Roughness. Boundary-Layer Meteorology, 89(2), 175-195.
- (1998) Preliminarily assessing the thermal state variation of the SPP stirling engine heat receiver blown off by atmospheric air. Applied Solar Energy (English translation of Geliotekhnika), 34(3), 47-50.
- (1998) Two-dimensional enhanced sedimentation in inclined fracture channels. Mathematical Engineering in Industry, 7(1), 97-125.
- Patel N & Ingham DB (1998) The Mixed Convection Flow of a Bingham Plastic in an Eccentric Annulus. International Journal of Fluid Mechanics Research, 25(1-3), 339-350.
- Zeb A, Elliott L, Ingham DB & Lesnic D (1998) The boundary element method for the solution of Stokes equations in two-dimensional domains. Engineering Analysis with Boundary Elements, 22(4), 317-326.
- (1998) Cooling and solidification of polymers in blow moulding operations. Plastics, Rubber and Composites Processing and Applications, 27(2), 65-72.
- (1998) The boundary element solution of the Laplace and biharmonic equations subjected to noisy boundary data. International Journal for Numerical Methods in Engineering, 43(3), 479-492.
- Ma L, Ingham DB & Wen X (1998) A finite volume method for fluid flow in polar cylindrical grids. International Journal for Numerical Methods in Fluids, 28(4), 663-677.
- (1998) Mixed Convection Adjacent to a Suddenly Heated Horizontal Circular Cylinder Embedded in a Porous Medium. Transport in Porous Media, 32(1-3), 329-355.
- Ma L, Ingham DB & Wen X (1998) Numerical predictions of the performance of small sampling cyclones. Journal of Aerosol Science, 29, S329-S330.
- Wen X & Ingham DB (1998) A numerical simulation of the removal of contaminated air using an aaberg exhaust hood. Journal of Aerosol Science, 29, S489-S490.
- Wen X & Ingham DB (1998) Numerical simulation of aerosol sampling from a thin-walled sampler at a yaw orientation of 90°. Journal of Aerosol Science, 29, S321-S322.
- Bradean R, Ingham DB, Heggs PJ & Pop I (1998) Mixed convection adjacent to a suddenly heated horizontal circular cylinder embedded in a porous medium. TRANSPORT IN POROUS MEDIA, 32(3), 329-355.
- Hu P, Ingham DB & Wen X (1998) Effect of Baffles and a Louvered Bypass on the Airflow and the Convective Patterns of Contaminant Inside a Fume Hood. American Industrial Hygiene Association Journal, 59(5), 303-312.
- Wen X, Ingham DB, Dombrowski N & Foumeny EA (1998) The generation of an orthogonal grid by the use of a boundary integral technique. Engineering Analysis with Boundary Elements, 21(3), 197-205.
- Lesnic D, Elliott L & Ingham DB (1998) A boundary element method for the determination of the transmissivity of a heterogeneous aquifer in groundwater flow systems. Engineering Analysis with Boundary Elements, 21(3), 223-234.
- Elliott L, Ingham DB & Wood JD (1998) A two-dimensional model of the three dimensional mixed convection flow of Newtonian and non-Newtonian fluids in a rectangular duct. International Journal of Heat and Mass Transfer, 41(1), 33-44.
- Minto BJ, Ingham DB & Pop I (1998) Free convection driven by an exothermic reaction on a vertical surface embedded in porous media. International Journal of Heat and Mass Transfer, 41(1), 11-23.
- Harris SD, Elliott L, Ingham DB & Pop I (1998) Transient free convection flow past a vertical flat plate subject to a sudden change in surface temperature. International Journal of Heat and Mass Transfer, 41(2), 357-372.
- Lesnic D, Elliott L & Ingham DB (1998) The solution of an inverse heat conduction problem subject to the specification of energies. International Journal of Heat and Mass Transfer, 41(1), 25-32.
- Lesnic D, Elliott L, Ingham DB, Clennell B & Knipe RJ (1997) A mathematical model and numerical investigation for determining the hydraulic conductivity of rocks. International Journal of Rock Mechanics and Mining Sciences, 34(5), 741-759.
- Ingham DB & Patel N (1997) Developing combined convection of non-Newtonian fluids in an eccentric annulus. Acta Mechanica, 121(1-4), 35-49.
- Pop I, Ingham DB & Lesnic D (1997) Conjugate Film Flow Down a Heated Vertical Wall. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 77(2), 151-154.
- Elliott L, Ingham DB & Wood JD (1997) MIXED CONVECTION FLOW OF NEWTONIAN AND NON-NEWTONIAN FLUIDS IN A HORIZONTAL RECTANGULAR DUCT. Numerical Heat Transfer, Part A: Applications, 32(8), 831-860.
- Harris SD, Ingham DB & Pop I (1997) Free Convection from a Vertical Plate in a Porous Medium Subjected to a Sudden Change in Surface Heat Flux. Transport in Porous Media, 26(2), 205-224.
- (1997) Determining the heat exchanger casing thermal state of the α-modification stirling engine for solar power plants. Applied Solar Energy (English translation of Geliotekhnika), 33(2), 32-45.
- (1997) One-dimensional enhanced sedimentation in inclined fracture channels. Mathematical Engineering in Industry, 6(4), 261-290.
- Lesnic D (1997) Spacewise coefficient identification in steady and unsteady one-dimensional diffusion problems. IMA Journal of Applied Mathematics, 59(2), 183-192.
- Lesnic D, Elliott L & Ingham DB (1997) An iterative boundary element method for solving numerically the Cauchy problem for the Laplace equation. Engineering Analysis with Boundary Elements, 20(2), 123-133.
- Bradean R, Ingham DB, Heggs PJ & Pop I (1997) UNSTEADY FREE CONVECTION ADJACENT TO AN IMPULSIVELY HEATED HORIZONTAL CIRCULAR CYLINDER IN POROUS MEDIA. Numerical Heat Transfer, Part A: Applications, 32(4), 325-346.
- Harris SD, Ingham DB & Pop I (1997) Free convection from a vertical plate in a porous media subjected to a sudden change in surface temperature. International Communications in Heat and Mass Transfer, 24(4), 543-552.
- Wen X, Ingham DB & Widodo B (1997) The free surface fluid flow over a step of an arbitrary shape in a channel. Engineering Analysis with Boundary Elements, 19(4), 299-308.
- Ingham DB & Yuan Y (1997) Multiple solutions of stokes flow with a free surface. Engineering Analysis with Boundary Elements, 19(4), 261-268.
- Yan B, Pop I & Ingham DB (1997) A numerical study of unsteady free convection from a sphere in a porous medium. International Journal of Heat and Mass Transfer, 40(4), 893-903.
- Bradean R, Ingham DB, Heggs PJ & Pop I (1997) The unsteady penetration of free convection flows caused by heating and cooling flat surfaces in a porous media. International Journal of Heat and Mass Transfer, 40(3), 665-687.
- Pop I, Ingham DB & Bradean R (1996) Transient free convection about a horizontal circular cylinder in a porous medium with constant surface flux heating. Acta Mechanica, 119(1-4), 79-91.
- Wright SD, Ingham DB & Pop I (1996) On natural convection from a vertical plate with a prescribed surface heat flux in porous media. Transport in Porous Media, 22(2), 181-193.
- Pop I, Ingham DB & Yuan Y (1996) Mixed Convective Conjugate Heat Transfer from a Vertical Flat Plate. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 76(5), 281-289.
- (1996) Transient modelling of extended surface heat transfer. ZAMM Zeitschrift fur Angewandte Mathematik und Mechanik, 76(SUPPL. 4), 385-388.
- (1996) RECOMMENDATIONS FOR THE DESIGN OF PUSH-PULL VENTILATION SYSTEMS FOR OPEN SURFACE TANKS. The Annals of Occupational Hygiene.
- Dombrowski N, Foumeny EA, Ingham DB & Qi YD (1996) Collection efficiencies of gauges at varying wind and pitch angles. Atmospheric Environment, 30(22), 3777-3788.
- Harris SD, Ingham DB & Pop I (1996) Transient free convection from a vertical plate subjected to a change in surface heat flux in porous media. Fluid Dynamics Research, 18(6), 313-324.
- Miskin I, Elliott L, Ingham DB & Hammond PS (1996) Steady suspension flows into two-dimensional horizontal and inclined channels. International Journal of Multiphase Flow, 22(6), 1223-1246.
- WEN X, INGHAM DB, DOMBROWSKI N & FOUMENY EA (1996) A NOTE ON THE APPLICATION OF THE AVERAGE CORRECTION TECHNIQUE. International Journal for Numerical Methods in Fluids, 23(8), 811-817.
- Pop I & Ingham DB (1996) Flow past a sphere embedded in a porous medium based on the Brinkman model. International Communications in Heat and Mass Transfer, 23(6), 865-874.
- Lesnic D, Elliott L & Ingham DB (1996) A numerical analysis of the data inversion of particle sizing instruments. Journal of Aerosol Science, 27(7), 1063-1082.
- Bradean R, Ingham DB, Heggs PJ & Pop I (1996) Free convection fluid flow due to a periodically heated and cooled vertical flat plate embedded in a porous media. International Journal of Heat and Mass Transfer, 39(12), 2545-2557.
- Lesnic D, Elliott L & Ingham DB (1996) Identification of the Thermal Conductivity and Heat Capacity in Unsteady Nonlinear Heat Conduction Problems Using the Boundary Element Method. Journal of Computational Physics, 126(2), 410-420.
- (1996) NUMERICAL MODELLING OF THE FLOW PATTERNS INDUCED BY A PUSH-PULL VENTILATTON SYSTEM. The Annals of Occupational Hygiene.
- Ingham DB & Patel N (1996) DEVELOPING COMBINED CONVECTION IN AN ECCENTRIC ANNULUS. Numerical Heat Transfer, Part A: Applications, 29(7), 707-724.
- Lesnic D, Elliott L & Ingham DB (1996) Application of the boundary element method to inverse heat conduction problems. International Journal of Heat and Mass Transfer, 39(7), 1503-1517.
- Miskin I, Elliott L, Ingham DB & Hammond PS (1996) The viscous resuspension of particles in an inclined rectangular fracture. International Journal of Multiphase Flow, 22(2), 403-415.
- (1996) EFFECT OF THE LOCATION OF THE EXHAUST DUCT, AN EXTERIOR OBSTRUCTION AND HANDLE ON THE AIR FLOW INSIDE AND AROUND A FUME CUPBOARD. The Annals of Occupational Hygiene.
- (1996) LONG RANGE EXHAUSTION—A MATHEMATICAL MODEL FOR THE AXISYMMETRIC AIR FLOW OF A LOCAL EXHAUST VENTILATION HOOD ASSISTED BY A TURBULENT RADIAL JET. The Annals of Occupational Hygiene.
- Foumeny EA, Ingham DB & Walker AJ (1996) Bifurcations of incompressible flow through plane symmetric channel expansions. Computers & Fluids, 25(3), 335-351.
- Bradean R, Ingham DB, Heggs PJ & POP I (1996) Buoyancy-induced flow adjacent to a periodically heated and cooled horizontal surface in porous media. International Journal of Heat and Mass Transfer, 39(3), 615-630.
- Ingham DB, Watson P & Heggs PJ (1996) Upstream migration of heat during combined convection in a horizontal parallel plate duct. International Journal of Heat and Mass Transfer, 39(2), 437-440.
- Heggs PJ, Houghton JM & Ingham DB (1995) Application of the enthalpy method to the blow moulding of polymers. Plastics, Rubber and Composites Processing and Applications, 23(4), 203-210.
- Pop I, Yan B & Ingham DB (1995) Free convection from a horizontal moving sheet. Heat and Mass Transfer, 31(1-2), 57-64.
- Dombrowski N, Foumeny EA, Ingham DB & Qi YD (1995) Design of wind-independent deposition gauges. Atmospheric Environment, 29(7), 767-779.
- Ingham DB & Jones AT (1995) Combined convection flow of a power-law fluid in a vertical duct with linearly varying wall temperatures. Acta Mechanica, 110(1-4), 19-32.
- Ingham DB & Pop I (1995) Flow and heat transfer due to a suddenly stopped and cooled plate. Acta Mechanica, 112(1-4), 107-116.
- Han H, Ingham DB & Yuan Y (1995) The Boundary Element Method for the Solution of the Backward Heat Conduction Equation. Journal of Computational Physics, 116(2), 292-299.
- Wen X & Ingham DB (1995) Aspiration efficiency of a thin-walled cylindrical probe rear-facing the wind. Journal of Aerosol Science, 26(1), 95-107.
- Lesnic D, Elliott L & Ingham DB (1995) An inversion method for the determination of the particle size distribution from diffusion battery measurements. Journal of Aerosol Science, 26(5), 797-812.
- Lesnic D, Elliott L & Ingham DB (1995) A note on the determination of the thermal properties of a material in a transient nonlinear heat conduction problem. International Communications in Heat and Mass Transfer, 22(4), 475-482.
- Pop I, Ingham DB & Miskin I (1995) Mixed convection in a porous medium produced by a line heat source. Transport in Porous Media, 18(1), 1-13.
- Pop I, Lesnic D & Ingham DB (1995) Conjugate mixed convection on a vertical surface in a porous medium. International Journal of Heat and Mass Transfer, 38(8), 1517-1525.
- Ingham DB, Wen X, Dombrowski N & Foumeny EA (1995) Aspiration efficiency of a thin-walled shallow-tapered sampler rear-facing the wind. Journal of Aerosol Science, 26(6), 933-944.
- Elliott L, Ingham DB & El Bashir TBA (1995) Stokes flow past two circular cylinders using a Boundary Element Method. Computers & Fluids, 24(7), 787-798.
- Ingham DB, Watson P & Heggs PJ (1995) Recirculating laminar mixed convection in a horizontal parallel plate duct. International Journal of Heat and Fluid Flow, 16(3), 202-210.
- Lesnic D, Elliott L & Ingham DB (1995) Treatment of singularities in time-dependent problems using the boundary element method. Engineering Analysis with Boundary Elements, 16(1), 65-70.
- Elliott L, Ingham DB & El Bashir TBA (1995) The solution of a paradoxical slow flow problem using a boundary element method. Engineering Analysis with Boundary Elements, 15(1), 29-35.
- Lesnic D, Ingham DB & Pop I (1995) Conjugate Free Convection from a Horizontal Surface in a Porous Medium. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 75(9), 715-722.
- Yan B, Ingham DB & Morton BR (1994) The streaming flow initiated by oscillating cascades of cylinders and their stability. Physics of Fluids, 6(4), 1472-1481.
- Moore I, Mobbs SD, Ingham DB & King JC (1994) A numerical model of blowing snow around an Antarctic building. Annals of Glaciology, 20, 341-346.
- Lesnic D, Elliott L & Ingham DB (1994) Characterizations of the critical Stokes number for potential and viscous flows. Mathematika, 41(02), 277-277.
- Wen X & Ingham DB (1994) A numerical method for accelerating the rate of convergence of the SIMPLE-like algorithm for flow through a thin filter. International Journal for Numerical Methods in Fluids, 19(10), 889-903.
- Yan B, Ingham DB & Dunnett SJ (1994) A Numerical Investigation into the Sampling Performance of a Tube Sampler. Aerosol Science and Technology, 20(4), 291-302.
- Jones AT & Ingham DB (1994) Power-law fluid flow in heated vertical ducts. Journal of Thermophysics and Heat Transfer, 8(2), 309-315.
- Lesnic D, Elliott L & Ingham DB (1994) Treatment of singularities in exterior fluid domains with corners using the boundary element method. Computers & Fluids, 23(6), 817-827.
- Lesnic D, Elliott L & Ingham DB (1994) The influence of separation on the collection efficiencies of obstacles. Journal of Aerosol Science, 25(3), 527-533.
- Ingham DB, Wen X, Dombrowski N & Foumeny EA (1994) 28.P.01 Aspiration efficiency of a thin-walled sampling probe at a yaw orientation of 180°. Journal of Aerosol Science, 25, 463-464.
- Dombrowski N, Foumeny EA, Ingham DB & Qi YD (1994) 09.O.05 On the reduction of blowout from deposition gauges. Journal of Aerosol Science, 25, 85-86.
- Ingham DB & Yuan Y (1994) Boundary element solutions of the steady state, singular, inverse heat transfer equation. International Journal of Heat and Mass Transfer, 37, 273-280.
- Patel N & Ingham DB (1994) Analytic solutions for the mixed convection flow of non-newtonian fluids in parallel plate ducts. International Communications in Heat and Mass Transfer, 21(1), 75-84.
- Patel N & Ingham DB (1994) Mixed convection flow of a Bingham plastic in an eccentric annulus. International Journal of Heat and Fluid Flow, 15(2), 132-141.
- Jones AT & Ingham DB (1994) COMBINED CONVECTION FLOW AND HEAT TRANSFER TO A POWER LAW FLUID IN A VERTICAL DUCT. INCLUDING REVERSE FLOW SITUATIONS. Numerical Heat Transfer, Part A: Applications, 25(1), 57-73.
- Ingham DB & Yan B (1994) The effect of a cylindrical backing body on the sampling efficiency of a cylindrical sampler. Journal of Aerosol Science, 25(3), 535-541.
- Ingham DB & Yan B (1994) Re-entrainment of particles on the outer wall of a cylindrical blunt sampler. Journal of Aerosol Science, 25(2), 327-340.
- Dombrowski N, Foumeny EA, Ingham DB & Qi YD (1994) Prediction of “blowout” from deposition gauges. Atmospheric Environment, 28(16), 2685-2690.
- (1994) Finite difference solutions for the pseudo-single phase model of the blow moulding of polymers. Plastics, Rubber and Composites Processing and Applications, 22(5), 269-276.
- (1993) Mathematical model of the fluid-flow of a slot exhaust-hood reinforced by a two-dimensional jet-flow. Mathematical Engineering in Industry, 4(3), 227-247.
- Wen X & Ingham DB (1993) A new method for accelerating the rate of convergence of the simple-like algorithm. International Journal for Numerical Methods in Fluids, 17(5), 385-400.
- Houghton JM, Ingham DB & Heggs PJ (1993) AN APPLICATION OF THE BOUNDARY ELEMENT TECHNIQUE TO PERIODIC HEAT TRANSFER IN A FIN ASSEMBLY. Numerical Heat Transfer, Part A: Applications, 23(4), 379-398.
- Jones AT & Ingham DB (1993) Flow reversal in a combined convection flow of Newtonian fluid in a vertical duct. Acta Mechanica, 99(1-4), 135-153.
- Pop I, Ingham DB & Cheng P (1993) Transient free convection about a horizontal circular cylinder in a porous medium. Fluid Dynamics Research, 12(6), 295-305.
- Yan B, Ingham DB & Morton BR (1993) Streaming flow induced by an oscillating cascade of circular cylinders. Journal of Fluid Mechanics, 252(-1), 147-147.
- INGHAM DB & YUAN Y (1993) The solution of a nonlinear inverse problem in heat transfer. IMA Journal of Applied Mathematics, 50(2), 113-132.
- Dombrowski N, Foumeny EA, Ingham DB & Qi YD (1993) Modelling of flow characteristics within deposition gauges under blowout conditions. Atmospheric Environment. Part A. General Topics, 27(9), 1435-1442.
- Ingham DB & Yan B (1993) Fluid flows around cascades. ZAMP Zeitschrift f�r angewandte Mathematik und Physik, 44(1), 53-72.
- Ingham D & Wen X (1993) Disklike body sampling in a turbulent wind. Journal of Aerosol Science, 24(5), 629-642.
- Jones AT & Ingham DB (1993) Combined convection flow in a vertical duct with wall temperatures that vary linearly with depth. International Journal of Heat and Fluid Flow, 14(1), 37-47.
- Lesnic D, Elliott L & Ingham DB (1993) Boundary element methods for determining the fluid velocity in potential flow. Engineering Analysis with Boundary Elements, 11(3), 203-213.
- Dombrowski N, Foumeny EA, Ingham DB & Qi YD (1993) Air entrainment of particles from a flat plate. Atmospheric Environment. Part A. General Topics, 27(15), 2449-2451.
- Pop I & Ingham DB (1993) A note on conjugate forced convection boundary-layer flow past a flat plate. International Journal of Heat and Mass Transfer, 36(15), 3873-3876.
- Houghton JM, Ingham DB & Heggs PJ (1993) A new implementation of the boundary element technique for time dependent pseudo-stationary heat transfer. Engineering Analysis with Boundary Elements, 11(1), 55-65.
- Lesnic D, Elliott L & Ingham DB (1993) A mathematical model for predicting the collection efficiency of the rotating arm collector. Journal of Aerosol Science, 24(2), 163-180.
- Wen X & Ingham DB (1993) 39 P 12 The effect of the filter on the turbulent flow around and inside a blunt sampler. Journal of Aerosol Science, 24, S525-S526.
- Ingham DB & Yan B (1993) 39 P 10 A numerical calculation of the penetration efficiency of a small cyclone. Journal of Aerosol Science, 24, S521-S522.
- Lesnic D, Elliott L & Ingham DB (1993) 18 P 17 On Levin's theorem for the critical stokes number. Journal of Aerosol Science, 24, S151-S152.
- Hunt GR & Ingham DB (1993) 03 O 03 A 3-dimensional axisymmetric model of the air flow pattern created by a local exhaust ventilation system reinforced by a turbulent radial jet flow. Journal of Aerosol Science, 24, S15-S16.
- Dumouchel C, Bloor MIG, Dombrowski N, Ingham DB & Ledoux M (1993) Viscous flow in a swirl atomizer. Chemical Engineering Science, 48(1), 81-87.
- POP I, INGHAM DB & CHENG P (1993) Transient free convection between two concentric spheres filled witha porous medium. Journal of Thermophysics and Heat Transfer, 7(4), 724-727.
- Pop I, Ingham DB & Cheng P (1992) Transient Natural Convection in a Horizontal Concentric Annulus Filled With a Porous Medium. Journal of Heat Transfer, 114(4), 990-990.
- (1992) THE FLUID MECHANICS OF A TWO-DIMENSIONAL AABERG EXHAUST HOOD. The Annals of Occupational Hygiene.
- (1992) A MATHEMATICAL MODEL FOR THE AIR FLOW AROUND A WORKER NEAR A FUME CUPBOARD. The Annals of Occupational Hygiene.
- Houghton JM, Ingham DB & Heggs PJ (1992) The One-Dimensional Analysis of Oscillatory Heat Transfer in a Fin Assembly. Journal of Heat Transfer, 114(3), 548-548.
- Ingham DB & Yan B (1992) Fluid flow induced by a small amplitude harmonically oscillating cascade. Acta Mechanica, 91(1-2), 27-46.
- Ingham DB, Ritchie JA & Taylor CM (1992) The use of the boundary element method for determining flow separation at a corner. Engineering Analysis with Boundary Elements, 10(3), 199-208.
- Dombrowski N, Foumeny EA, Ingham DB & Qi Y (1992) The performance of some aerodynamically designed deposition gauges. Journal of Aerosol Science, 23, 571-574.
- Ingham DB, Ritchie JA & Taylor CM (1992) The motion of a semi-infinite bubble between parallel plates. ZAMP Zeitschrift f�r angewandte Mathematik und Physik, 43(1), 191-206.
- Ingham DB, Yan B & Morton BR (1992) The fluid flow induced by large-amplitude oscillations of a cascade. Computers & Fluids, 21(3), 305-321.
- Tang T & Ingham DB (1992) Multigrid solutions of steady two-dimensional flow past a cascade of sudden expansions. Computers & Fluids, 21(4), 647-660.
- Wen X & Ingham DB (1992) Flow induced by a submerged source or sink in a three-layer fluid. Computers & Fluids, 21(1), 133-144.
- Hunt GR & Ingham DB (1992) Effects of exhaust inlet size on the fluid flow patterns created by an Aaberg exhaust hood. Journal of Aerosol Science, 23, 575-578.
- Wen X & Ingham DB (1992) Blunt body sampling in a laminar and turbulent wind. Journal of Aerosol Science, 23, 567-570.
- Ingham DB & Han H (1992) An analysis of the boundary element method for the heat conduction equation with periodic heating. Engineering Analysis with Boundary Elements, 9(2), 137-144.
- (1991) Forced flow in a right-angled corner. Higher-order theory. European Journal of Mechanics, B/Fluids, 10(3), 313-331.
- Ingham DB & Pop I (1991) A higher-order analysis of natural convection in a corner. Wärme- und Stoffübertragung, 26(5), 289-298.
- Ingham DB, Tang T & Morton BR (1991) Steady two-dimensional flow past a normal flat plate. ZAMP Zeitschrift f�r angewandte Mathematik und Physik, 42(4), 584-604.
- Wen X & Ingham DB (1991) Cavitating flows through a cascade of flat plates. International Journal for Numerical Methods in Fluids, 12(6), 577-584.
- Ingham DB & Wen X (1991) Separating inviscid flows. Acta Mechanica, 86(1-4), 1-14.
- Dunnett SJ & Ingham DB (1991) Use of the boundary element method to determine the sampling efficiency of blunt aerosol samplers. Mathematical and Computer Modelling, 15(3-5), 131-141.
- Ingham DB, Hildyard ML & Heggs PJ (1991) The particle collection of an array of cylinders using the Boundary Element Method. Engineering Analysis with Boundary Elements, 8(1), 36-44.
- Ingham DB, Ritchie JA & Taylor CM (1991) The linear boundary element solution of Laplace's equation with Dirichlet boundary conditions. Mathematical and Computer Modelling, 15(3-5), 195-204.
- Ingham DB & Hildyard ML (1991) The fluid flow into a blunt aerosol sampler oriented at an angle to the oncoming flow. Journal of Aerosol Science, 22(3), 235-252.
- Dumouchel C, Ledoux M, Bloor MIG, Dombrowski N & Ingham DB (1991) The design of pressure swirl atomizers. Symposium (International) on Combustion, 23(1), 1461-1467.
- Tang T & Ingham DB (1991) On steady flow past a rotating circular cylinder at Reynolds numbers 60 and 100. Computers & Fluids, 19(2), 217-230.
- INGHAM DB & POP I (1991) Mixed convection about a cylinder embedded to a wedge in porous media. Journal of Thermophysics and Heat Transfer, 5(1), 117-120.
- (1991) Free-streamline flow past a cascade of sudden expansion. European Journal of Mechanics, B/Fluids, 10(2), 161-170.
- Ingham DB (1991) Diffusion of aerosols in the entrance region of a smooth cylindrical pipe. Journal of Aerosol Science, 22(3), 253-257.
- INGHAM DB, YUAN Y & HAN H (1991) The Boundary-Element Method for an Improperly Posed Problem. IMA Journal of Applied Mathematics, 47(1), 61-79.
- Ingham DB, Pop I & Cheng P (1990) Combined free and forced convection in a porous medium between two vertical walls with viscous dissipation. Transport in Porous Media, 5(4), 381-398.
- Ingham DB, Keen DJ, Heggs PJ & Morton BR (1990) Recirculating pipe flows. Journal of Fluid Mechanics, 213(-1), 443-443.
- Heggs PJ, Ingham DB & Keen DJ (1990) The effects of heat conduction in the wall on the development of recirculating combined convection flows in vertical tubes. International Journal of Heat and Mass Transfer, 33(3), 517-528.
- Ingham DB, Tang T & Morton BR (1990) Steady two-dimensional flow through a row of normal flat plates. Journal of Fluid Mechanics, 210(-1), 281-281.
- Ingham DB, Hildyard LT & Hildyard ML (1990) On the critical stokes' number for particle transport in potential and viscous flows near bluff bodies. Journal of Aerosol Science, 21(7), 935-946.
- Ingham DB & Tang T (1990) A numerical investigation into the steady flow past a rotating circular cylinder at low and intermediate Reynolds numbers. Journal of Computational Physics, 87(1), 91-107.
- Ingham DB & Pop I (1990) A note on the free convection in a wall plume: horizontal wall effects. International Journal of Heat and Mass Transfer, 33(8), 1770-1773.
- Ingham DB, Hildyard ML & Heggs PJ (1989) The particle collection efficiency of a cascade of cylinders. The Canadian Journal of Chemical Engineering, 67(4), 545-553.
- Morton BR, Ingham DB, Keen DJ & Heggs PJ (1989) Recirculating Combined Convection in Laminar Pipe Flow. Journal of Heat Transfer, 111(1), 106-106.
- Ingham DB & Pop I (1989) Natural convection in a right-angle corner: higher-order analysis. International Journal of Heat and Mass Transfer, 32(11), 2167-2177.
- Amooie-Foumeny E, Dombrowski N, Dunnett S, Ingham D & Qi Y (1989) A study of the collection characteristics of deposition gauges. Journal of Aerosol Science, 20(8), 1177-1180.
- (1989) A viscous model for flow in the hydrocyclone.. IN: SOLID-LIQUID SEPARATION PRACTICE 3, RUGBY, U.K., INST. CHEM. ENGRS., 1989, PAPER 1(113 ) (EFCE Event No. 397) (EFCE Publication No. 72)), 1-16.
- (1988) THE ASPIRATION OF NON-SPHERICAL PARTICLES INTO A BULKY SAMPLING HEAD. The Annals of Occupational Hygiene.
- Ingham DB, Keen DJ & Heggs PJ (1988) Flows in Vertical Channels With Asymmetric Wall Temperatures and Including Situations Where Reverse Flows Occur. Journal of Heat Transfer, 110(4a), 910-910.
- Ingham DB & Pop I (1988) Higher-order effects in natural convection flow over uniform flux inclined flat plates in porous media. Wärme- und Stoffübertragung, 22(5), 239-242.
- Ingham DB, Keen DJ & Heggs PJ (1988) Two dimensional combined convection in vertical parallel plate ducts, including situations of flow reversal. International Journal for Numerical Methods in Engineering, 26(7), 1645-1664.
- Dunnett SJ & Ingham DB (1988) An Empirical Model for the Aspiration Efficiencies of Blunt Aerosol Samplers Orientated at an Angle to the Oncoming Flow. Aerosol Science and Technology, 8(3), 245-264.
- Ingham DB (1988) An exact solution for non-darcy free convection from a horizontal line source of heat. Wärme- und Stoffübertragung, 22(3-4), 125-127.
- Ingham DB & Pop I (1988) The sudden melting of a thin vertical flat plate in a Darcian free convection flow. Acta Mechanica, 71(1-4), 77-93.
- Dunnett SJ & Ingham DB (1988) The human head as a blunt aerosol sampler. Journal of Aerosol Science, 19(3), 365-380.
- Dunnett SJ & Ingham DB (1988) The behaviour of non-spherical particles near a cylindrical sampling head. Journal of Aerosol Science, 19(7), 907-910.
- Ingham DB, Heggs PJ & Hildyard ML (1988) A note on the pressure drop across a fibrous filter modelled as a symmetrical array of cylinders. Journal of Aerosol Science, 19(3), 385-386.
- Ingham DB & Pop I (1988) A note on free convection flow in a corner. International Communications in Heat and Mass Transfer, 15(3), 315-322.
- (1988) The evaluation of the pressure drop across a filter using the boundary element method.. MATH. ENGNG. IND., 2(1 , 1988), 1-18.
- Ingham DB & Pop I (1987) Natural convection about a heated horizontal cylinder in a porous medium. Journal of Fluid Mechanics, 184(-1), 157-157.
- Bloor MIG & Ingham DB (1987) The flow in industrial cyclones. Journal of Fluid Mechanics, 178(-1), 507-507.
- Dunnett SJ & Ingham DB (1987) The effects of finite reynolds number on the aspiration of particles into a bulky sampling head. Journal of Aerosol Science, 18(5), 553-561.
- Merkin JH & Ingham DB (1987) Mixed convection similarity solutions on a horizontal surface. ZAMP Zeitschrift f�r angewandte Mathematik und Physik, 38(1), 102-116.
- Ingham DB & Pop I (1987) Free convection from a semi-infinite vertical surface bounded by a horizontal wall in a porous medium. International Journal of Heat and Mass Transfer, 30(8), 1615-1622.
- Ingham DB & Pop I (1987) Darcian free convective flow about an impermeable horizontal surface bounded by a vertical wall. International Journal of Engineering Science, 25(3), 373-383.
- (1987) Paper XIV(ii) The boundary element method in lubrication analysis. Tribology Series, 11(C), 431-441.
- (1987) Mixed free and forced convection in heated laminar pipe flow.((UNSW Report 1987-FMT-8)).
- (1987) The boundary element method in lubrication analysis.((eds.), Amsterdam, The Netherlands, Elsevier Sci. Publishers B.V., 1987, Session XIV, Paper XIV(ii)).
- Heggs PJ (1987) Flow through a cascade.. IN: BOUNDARY ELEMENTS IX, 3 : Fluid Flow and Potential Applications, C.A. Brebbia; W.L. Wendland; G. Kuhn (eds.), Southampton, U, 443-457.
- BLOOR MIG & INGHAM DB (1987) A NOTE ON THE REDUCED EFFICIENCY OF THE INDUSTRIAL CYCLONE. Chemical Engineering Communications, 57(1-6), 31-40.
- Ingham DB & Pop I (1986) Free-forced convection from a heated longitudinal horizontal cylinder embedded in a porous medium. Wärme- und Stoffübertragung, 20(4), 283-289.
- Ingham DB, Merkin JH & Pop I (1986) Flow past a suddenly cooled horizontal plate. Wärme- und Stoffübertragung, 20(3), 237-241.
- Ingham DB (1986) Singular and non-unique solutions of the boundary-layer equations for the flow due to free convection near a continuously moving vertical plate. ZAMP Zeitschrift f�r angewandte Mathematik und Physik, 37(4), 559-572.
- Ingham DB & Kelmanson MA (1986) A note on the comparison between bie and fd techniques for solving elliptic BVPs with boundary singularities. Communications in Applied Numerical Methods, 2(2), 189-193.
- Ingham DB & Brown SN (1986) Flow Past a Suddenly Heated Vertical Plate in a Porous Medium. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 403(1824), 51-80.
- Ingham DB (1986) The non-Darcy free convection boundary layer on axi-symmetric and two-dimensional bodies of arbitrary shape. International Journal of Heat and Mass Transfer, 29(11), 1759-1760.
- Dunnett SJ & Ingham DB (1986) A mathematical theory to two-dimensional blunt body sampling. Journal of Aerosol Science, 17(5), 839-853.
- Ingham DB & Pop I (1986) A horizontal flow past a partially heated infinite vertical cylinder embedded in a porous medium. International Journal of Engineering Science, 24(8), 1351-1363.
- Ingham DB & Brown SN (1986) Flow past a suddenly heated vertical plate in a porous medium.. PROC. R. SOC. - A, 403(1824 , Jan. 1986), 51-80.
- Ingham DB, Merkin JH & Pop I (1985) Natural convection from a semi-infinite flat plate inclined at a small angle to the horizontal in a saturated porous medium. Acta Mechanica, 57(3-4), 183-202.
- Ingham DB (1985) Flow Past a Suddenly Heated Vertical Plate. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 402(1822), 109-134.
- Ingham DB, Merkin JH & Pop I (1985) Flow past a suddenly cooled horizontal flat surface in a saturated porous medium. Acta Mechanica, 56(3-4), 205-217.
- (1985) Boundary integral equation analysis of blunt-body sampling.. IN: BOUNDARY ELEMENTS VII, PROC. 7TH INT. CONF., (VILLA OLMO, ITALY: SEP. 1985), C.A. BREBBIA; G. MAIER (EDS.), 1 , Berlin, Fed. Rep. Germany, Springer-Verlag, 1985, Session 1, p.1-23-1-34. (A Comput. Mech. Publica.
- (1984) THEORETICAL INVESTIGATION OF THE FLUID MECHANICS OF THE HYDROCYCLONE.. Filtration and Separation, 21(4), 266-269.
- Ingham D (1984) Unsteady separation. Journal of Computational Physics, 53(1), 90-99.
- Ingham DB (1984) Transient mass transfer from an isothermal vertical flat plate. International Journal of Heat and Mass Transfer, 27(10), 1837-1843.
- Ingham DB (1984) A note on the mass transfer in the entrance to a flat duct with permeable walls. International Journal of Heat and Mass Transfer, 27(12), 2421-2422.
- (1984) A theoretical investigation of the fluid mechanics of the hydrocyclone.. FILTR. & SEP., 21(4 , Jul.-Aug. 1984, p.266-269.).
- (1984) The influence of vorticity on the efficiency of the hydrocyclone.((Bath, U.K.: Sep. 19-21, 1984), Cranfield, U.K., BHRA Fluid Engng., 1984, Session B, Paper B2, p.41-).
- (1984) The effect of particle shape on the efficiency of the hydrocyclone..
- Ingham DB (1984) Diffusion of aerosols from a stream flowing through a short cylindrical pipe. Journal of Aerosol Science, 15(5), 637-641.
- Manzoor M, Ingham DB & Heggs PJ (1984) The Accuracy of Perfect Contact Fin Analyses. Journal of Heat Transfer, 106(1), 234-234.
- Ingham DB, Merkin JH & Pop I (1984) Unsteady free convection of a stagnation point of attachment on an isothermal surface. International Journal of Mathematics and Mathematical Sciences, 7(3), 599-614.
- (1983) THEORETICAL ASPECTS OF HYDROCYCLONE FLOW.. Progress in Filtration and Separation, 3, 57-148.
- INGHAM DB, MERKIN JH & POP I (1983) THE COLLISION OF FREE-CONVECTION BOUNDARY LAYERS ON A HORIZONTAL CYLINDER EMBEDDED IN A POROUS MEDIUM. The Quarterly Journal of Mechanics and Applied Mathematics, 36(3), 313-335.
- Ingham DB (1983) Steady flow past a rotating cylinder. Computers & Fluids, 11(4), 351-366.
- Ingham DB (1983) Diffusion from a viscous stream flowing through a rectangular channel. Journal of Aerosol Science, 14(6), 741-745.
- Ingham DB & Kelmanson MA (1983) A boundary integral equation method for the study of slow flow within bearing geometries..
- Ingham DB & Kelmanson MA (1983) A boundary integral equation method for the study of slow flow within bearing geometries..
- MANZOOR M, INGHAM DB & HEGGS PJ (1983) Improved formulations for the analysis of convecting and radiating finned surfaces. AIAA Journal, 21(1), 120-126.
- Manzoor M, Ingham DB & Heggs PJ (1983) The One-Dimensional Analysis of Fin Assembly Heat Transfer. Journal of Heat Transfer, 105(3), 646-646.
- (1983) A boundary integral equation method for the study of slow flow within bearing geometries..
- Ingham DB (1982) Non-unique solutions of the boundary layer equations for the flow near the equator of a rotating sphere in a rotating fluid. Acta Mechanica, 42(1-2), 111-122.
- Ingham DB, Merkin JH & Pop I (1982) Flow past a suddenly cooled vertical flat surface in a saturated porous medium. International Journal of Heat and Mass Transfer, 25(12), 1916-1919.
- Heggs PJ, Ingham DB & Manzoor M (1982) The Analysis of Fin Assembly Heat Transfer by a Series Truncation Method. Journal of Heat Transfer, 104(1), 210-210.
- Dennis SCR, Ingham DB & Singh SN (1982) The slow translation of a sphere in a rotating viscous fluid. Journal of Fluid Mechanics, 117(-1), 251-251.
- Dennis SCR & Ingham DB (1982) The boundary layer on a fixed sphere on the axis of an unbounded rotating fluid. Journal of Fluid Mechanics, 123(-1), 219-219.
- Ingham DB & Hildyard LT (1982) Magnetohydrodynamic cross-field boundary layer flow. International Journal of Mathematics and Mathematical Sciences, 5(2), 377-384.
- INGHAM DB, HEGGS PJ & MANZOOR M (1981) Boundary Integral Equation Solution of Non-linear Plane Potential Problems. IMA Journal of Numerical Analysis, 1(4), 415-426.
- DENNIS SCR, INGHAM DB & SINGH SN (1981) THE STEADY FLOW OF A VISCOUS FLUID DUE TO A ROTATING SPHERE. The Quarterly Journal of Mechanics and Applied Mathematics, 34(3), 361-381.
- Ingham DB & Merkin JH (1981) Unsteady mixed convection from an isothermal circular cylinder. Acta Mechanica, 38(1-2), 55-69.
- Ingham DB, Heggs PJ & Manzoor M (1981) The numerical solution of plane potential problems by improved boundary integral equation methods. Journal of Computational Physics, 42(1), 77-98.
- Ingham DB (1981) The diffusional deposition of aerosols in fibrous filters. Journal of Aerosol Science, 12(4), 357-365.
- Ingham DB (1981) The entrance of airborne particles into a blunt sampling head. Journal of Aerosol Science, 12(6), 541-549.
- Ingham DB (1981) Precipitation of charged particles in human airways. Journal of Aerosol Science, 12(2), 131-135.
- Heggs PJ, Ingham DB & Manzoor M (1981) The Effects of Nonuniform Heat Transfer from an Annular Fin of Triangular Profile. Journal of Heat Transfer, 103(1), 184-184.
- Ingham DB (1981) HEAT TRANSFER BY NATURAL CONVECTION BETWEEN SPHERES AND CYLINDERS. Numerical Heat Transfer, 4(1), 53-67.
- Heggs PJ, Ingham DB & Manzoor M (1981) BOUNDARY INTEGRAL EQUATION ANALYSIS OF FIN ASSEMBLY HEAT TRANSFER. Numerical Heat Transfer, 4(3), 285-301.
- Ingham DB, Heggs PJ & Manzoor M (1981) Boundary Integral Equation Analysis of Transmission-Line Singularities. IEEE Transactions on Microwave Theory and Techniques, 29(11), 1240-1243.
- Ingham DB (1980) A note on the deposition of aerosol particles in a channel due to diffusion and electric charge. Journal of Aerosol Science, 11(5-6), 517-520.
- Ingham DB (1980) Deposition of charged particles near the entrance of a cylindrical tube. Journal of Aerosol Science, 11(1), 47-52.
- (1980) An analysis of boundary layer effects in a hydrocyclone..
- Dennis SCR, Singh SN & Ingham DB (1980) The steady flow due to a rotating sphere at low and moderate Reynolds numbers. Journal of Fluid Mechanics, 101(02), 257-257.
- Dennis SCR & Ingham DB (1979) Laminar boundary layer on an impulsively started rotating sphere. Physics of Fluids, 22(1), 1-1.
- Good W, Ingham DB, Griffiths TR & Wijayanayake RH (1979) Enthalpy–entropy relations in the fluid kinetics of aqueous solvent systems. Journal of the Chemical Society, Faraday Transactions 1: Physical Chemistry in Condensed Phases, 75(0), 942-942.
- Ingham DB (1979) MHD flows in the presence of a transverse magnetic field. Nuclear Engineering and Design, 52(3), 325-329.
- Dennis SCR, Ingham DB & Cook RN (1979) Finite-difference methods for calculating steady incompressible flows in three dimensions. Journal of Computational Physics, 33(3), 325-339.
- (1979) Viscous flow between two rotating spheres.. IN: CANCAM '79 PROC. SEVENTH CANADIAN CONGRESS OF APPLIED MECHANICS, (SHERBROOKE, CANADA: MAY 27 - JUN 1, 1979), F. ELLYIN; K, 2 , Sherbrooke, Canada, Proc. Seventh Canadian Congress Appl. Mech., 1979, 573-574.
- (1979) Natural convection between spheres and cylinders..
- Ingham DB (1978) Numerical results for flow past a suddenly heated vertical plate. Physics of Fluids, 21(11), 1891-1891.
- Ingham DB (1978) Free-convection boundary layer on an isothermal horizontal cylinder. Zeitschrift für angewandte Mathematik und Physik ZAMP, 29(6), 871-883.
- INGHAM DB (1978) Flow Past a Suddenly Cooled Vertical Plate. IMA Journal of Applied Mathematics, 22(2), 189-196.
- Ingham DB (1978) Transient free convection on an isothermal vertical flat plate. International Journal of Heat and Mass Transfer, 21(1), 67-69.
- INGHAM DB (1977) Flow Past an Impulsively Started Semi-infinite Flat Plate in the Presence of a Magnetic Field. IMA Journal of Applied Mathematics, 20(4), 459-469.
- Bloor MIG & Ingham DB (1977) Axially symmetric boundary layers on a finite disk. Physics of Fluids, 20(8), 1228-1228.
- Ingham DB (1977) SINGULAR PARABOLIC PARTIAL-DIFFERENTIAL EQUATIONS THAT ARISE IN IMPULSIVE MOTION PROBLEMS.. Journal of Applied Mechanics, Transactions ASME, 44 Ser E(3), 397-400.
- Bloor MIG & Ingham DB (1977) On the use of a Pohlhausen method in three dimensional boundary layers. Zeitschrift für angewandte Mathematik und Physik ZAMP, 28(2), 289-299.
- Ingham DB (1977) Gravity settling of aerosol particles in horizontal rectangular tubes with some diffusion. Journal of Aerosol Science, 8(3), 139-147.
- Ingham DB (1977) Singular Parabolic Partial-Differential Equations That Arise in Impulsive Motion Problems. Journal of Applied Mechanics, 44(3), 396-396.
- Ingham DB (1976) Diffusion and sedimentation of aerosol particles from Poiseuille flow in rectangular tubes. Journal of Aerosol Science, 7(1), 13-20.
- Ingham DB (1976) Simultaneous diffusion and sedimentation of aerosol particles in rectangular tubes. Journal of Aerosol Science, 7(5), 373-380.
- (1976) BOUNDARY LAYER FLOWS ON THE SIDE WALLS OF CONICAL CYCLONES.. Trans Inst Chem Eng, 54(4), 276-280.
- INGHAM DB (1975) Plane Sub-Critical Flow Past a Lifting Aerofoil. IMA Journal of Applied Mathematics, 16(1), 73-80.
- Good W & Ingham DB (1975) Enthalpy-entropy relationships in the fluid kinetics of aqueous electrolyte solutions containing positively hydrated ions. Electrochimica Acta, 20(1), 57-61.
- (1975) TURBULENT SPIN IN A CYCLONE. TRANS. INST. CHEM. ENG., 53(1 (JANUARY, 1975)), 1-6.
- Ingham DB (1975) Diffusion of disintegration products of radioactive gases in circular and flat channels. Journal of Aerosol Science, 6(6), 395-402.
- Good W, Ingham DB & Stone J (1975) On establishing the validity of enthalpy-entropy relationships. Tetrahedron, 31(3), 257-263.
- Ingham DB (1975) Diffusion of aerosols from a stream flowing through a cylindrical tube. Journal of Aerosol Science, 6(2), 125-132.
- (1975) THE LEAKAGE EFFECT IN THE INDUSTRIAL CYCLONE. TRANS. INST. CHEM. ENG., 53(1 (JANUARY, 1975)), 7-11.
- (1974) THEORETICAL ANALYSIS OF THE CONICAL CYCLONE((SEPTEMBER 9-11, 1974)).
- Ingham DB (1974) Steady magnetohydrodynamic flow past a circular cylinder. International Journal for Numerical Methods in Engineering, 8(4), 771-781.
- Aspelund O, Ingham D, Djaloeis A, Kelleter H & Mayer-Böricke C (1974) DWBA and CCBA analysis of selected transitions in the reaction at Ed = 80 MeV. Physics Letters B, 50(4), 441-444.
- ROBERTSO RG, MARTIN S, FALK WR, INGHAM D & DJALOEIS A (1974) HIGHLY PROTON-RICH TZ=-2 NUCLIDES - C-8 AND MG-20. PHYSICAL REVIEW LETTERS, 32(21), 1207-1209.
- Aspelund O, Ingham D, Djaloeis A, Kelleter H & Mayer-Böricke C (1974) Investigation of the quadrupole deformation of 11B by means of inelastic helion scattering. Nuclear Physics A, 231(1), 115-119.
- Ingham D, Eisberg R, Makino M & Waddell C (1974) Small-angle inelastic scattering of 40 MeV protons by 12C, 40Ca, 56Fe and 58Ni. Nuclear Instruments and Methods, 114(1), 5-12.
- Ingham DB (1973) The two-dimensional slow flow of a conducting fluid. International Journal of Engineering Science, 11(8), 871-883.
- (1973) Impulsively started viscous flow past a finite flat plate with and without an applied magnetic field. International Journal for Numerical Methods in Engineering, 6(4 (1973)), 521-527.
- Ingham DB (1973) Impulsively started viscous flow past a finite flat plate with and without an applied magnetic field. International Journal for Numerical Methods in Engineering, 6(4), 521-527.
- INGHAM DB (1967) THE MAGNETOGASDYNAMIC BOUNDARY LAYER FOR A THERMALLY CONDUCTING PLATE. The Quarterly Journal of Mechanics and Applied Mathematics, 20(3), 347-364.
- INGHAM DB (1965) The Magnetogasdynamic Boundary Layer on a Thermally Insulated Flat Plate. IMA Journal of Applied Mathematics, 1(4), 323-338.
- Degereji MU, Ingham DB, Ma L, Pourkashanian M & Williams A () Prediction of ash slagging propensity in the burner region of a pf combustion furnace.

### Chapters

- Ingham DB & Ma L (2005) Fundamental Equations for CFD in River Flow Simulations, Computational Fluid Dynamics: Applications in Environmental Hydraulics (pp. 17-49).
- Ma L, Ingham DB & Pourkashanian M (2005) Application of fluid flows through porous media in fuel cells In Ingham DB & Pop I (Ed.), Transport Phenomena in Porous Media III Elsevier
- (2005) Parameter identification within a porous medium using genetic algorithms, Handbook of Porous Media, Second Edition (pp. 687-742).
- (2003) Detection of subsurface cavities and inclusions using genetic algorithms, Inverse Problems in Engineering Mechanics IV (pp. 251-260).
- Marin L, Elliott L, Heggs PJ, Ingham DB, Lesnic D & Wen X (2003) Boundary element solution for the Cauchy problem associated with the Helmholtz equation by the Tikhonov regularisation method, Inverse Problems in Engineering Mechanics IV (pp. 485-494).

### Conference proceedings papers

- Xie P, LU X, INGHAM , ma L & POURKASHANIAN M (2017) Mass transfer characteristics of the liquid film flow in a rotating packed bed for CO2 capture: A micro-scale CFD analysis. Energy Procedia, Vol. 142 (pp 3407-3414), 21 August 2017 - 24 August 2017. View this article in WRRO
- Oguntade HI, Andrews GE, Burns AD, Ingham DB & Pourkashanian M (2017) Impingement/effusion cooling with low coolant mass flow. Proceedings of the ASME Turbo Expo, Vol. 5C-2017
- Stechly K, Clements A, Al-Qayim K, Alvarez Rodriguez A, Szuhanski J, Daood SS, Ingham D, Ma L, Nimmo W & Pourkashanian M (2016) CFD Predictions of Biomass Combustion in a 250 kW Combustion Test Facility. NA, 2 September 2016 - 7 September 2016.
- Carcadea E, Varlam M, Ingham DB, Patularu LG, Marinoiu A, Ion-Ebrasu D & Stefanescu I (2016) Effect of Gdl(+MPL) Compression on the PEM Fuel Cell Performance. ECS Transactions, Vol. 75(14) (pp 167-177)
- Carcadea E, Varlam M, Stefanescu I, Ingham D, Marinoiu A, Patularu L, Raceanu M & Schitea D (2015) A CFD Simulation for an Air Breathing PEMFC for Power Source Portable Applications. ECS Transactions, Vol. 69(17) (pp 971-982)
- Savastano W, Pranzitelli A, Andrews GE, Biancolini ME, Ingham DB & Pourkashanian M (2015) Goal driven shape optimisation for conjugate heat transfer in an effusion cooling plate. Proceedings of the ASME Turbo Expo, Vol. 5A
- Ali U, Palma CF, Hughes KJ, Ingham DB, Ma L & Pourkashanian M (2015) Thermodynamic analysis and process system comparison of the exhaust gas recirculated, steam injected and humidified micro gas turbine. Proceedings of the ASME Turbo Expo, Vol. 3
- Proietti D, Biancolini ME, Pranzitelli A, Ingham DB, Andrews GE & Pourkashanian M (2015) Multi-objective CFD optimisation of shaped hole film cooling with mesh morphing. Proceedings of the ASME Turbo Expo, Vol. 5B
- (2015) The effects of the composition of microporous layers on the permeability of gas diffusion layers. Proceedings of the 6th European Fuel Cell - Piero Lunghi Conference, EFC 2015 (pp 275-276)
- Oguntade HI, Andrews GE, Burns AD, Ingham DB & Pourkashanian M (2015) The influence the number of holes on effusion cooling effectiveness for an X/D of 4.7. Proceedings of the ASME Turbo Expo, Vol. 5A
- Nagib M, Burns A, Ingham D & Al-Banbi A (2015) A new practice of streamline simulation for compositional and miscible floods. Society of Petroleum Engineers - SPE Saudi Arabia Section Annual Technical Symposium and Exhibition
- Ali U, Best T, Finney KN, Palma CF, Hughes KJ, Ingham DB & Pourkashanian M (2014) Process Simulation and Thermodynamic Analysis of a Micro Turbine with Post-combustion CO2 Capture and Exhaust Gas Recirculation. Energy Procedia, Vol. 63 (pp 986-996)
- Oguntade HI, Andrews GE, Burns AD, Ingham DB & Pourkashanian M (2014) Conjugate heat transfer predictions of effusion cooling with shaped trench outlet. Proceedings of the ASME Turbo Expo, Vol. 5A
- (2014) Application of stream-line simulation for gas displacement processes. Society of Petroleum Engineers - SPE EOR Conference at Oil and Gas West Asia 2014: Driving Integrated and Innovative EOR (pp 463-475)
- Nagib M, Burns A, Ingham D, Pourkashanian M & El-Banbi AH (2014) New application of streamline simulation for gas displacement processes. Society of Petroleum Engineers - SPE Annual Caspian Technical Conference and Exhibition
- Alhazmi N, Ismail MS, Ingham DB, Hughes KJ, Ma L & Pourkashanian M (2013) The through-plane thermal conductivity and the contact resistance of the components of the membrane electrode assembly in proton exchange membrane fuel cells. EFC 2013 - Proceedings of the 5th European Fuel Cell Piero Lunghi Conference (pp 113-114)
- Wilson CW (2013) Experimental and theoretical investigation of pathways to deposit formation in thermally stressed aviation fuel in the presence of nitrogenous additives. 13th International Conference on Stability, Handling and Use of Liquid Fuels 2013 (pp 230-240)
- (2012) Mapping the Urban Wind Resource over UK cities using an analytical downscaling method. European Wind Energy Conference and Exhibition 2012, EWEC 2012, Vol. 2 (pp 1306-1315)
- Oguntade HI, Andrews GE, Burns AD, Ingham DB & Pourkashanian M (2012) Conjugate heat transfer predictions of effusion cooling: The influence of the coolant jet-flow direction on the cooling effectiveness. Proceedings of the ASME Turbo Expo, Vol. 4(PARTS A AND B) (pp 1333-1343)
- Oguntade HI, Andrews GE, Burns AD, Ingham DB & Pourkashanian M (2012) Conjugate heat transfer predictions of effusion cooling: The influence of injection hole size on cooling performance. Proceedings of the ASME Turbo Expo, Vol. 4(PARTS A AND B) (pp 1321-1332)
- Carcadea E, Ingham DB, Stefanescu I, Ionete R & Ene H (2011) The influence of permeability changes for a 7-serpentine channel pem fuel cell performance. International Journal of Hydrogen Energy, Vol. 36(16) (pp 10376-10383)
- Ismail MS, Borman DJ, Damjanovic T, Ingham D & Pourkashanian M (2011) On the through-plane permeability of microporous layer-coated gas diffusion layers used in proton exchange membrane fuel cells. International Journal of Hydrogen Energy, Vol. 36(16) (pp 10392-10402)
- Lumb AB, Burns AD, Ingham DB & Pourkashanian M (2011) Computational fluid dynamic modelling of airway gas flow with tracheal intubation. BRITISH JOURNAL OF ANAESTHESIA, Vol. 106(3) (pp 438P-438P)
- Alhazmi N, Hughes K, Ingham D, Ismail M, Ma L & Pourkashanian M (2011) The effect of anisotropic GDL on the performance of PEM fuel cell. EFC 2011 - Proceedings of the 4th European Fuel Cell Piero Lunghi Conference and Exhibition (pp 407-408)
- Oguntade HI, Andrews GE, Burns A, Ingham D & Pourkashanian M (2011) Predictions of effusion cooling with conjugate heat transfer. Proceedings of the ASME Turbo Expo, Vol. 5(PARTS A AND B) (pp 225-235)
- Huang W, Wang Z-G, Luo S-B, Liu J, Xia Z-X, Lei J, Jin L, Wang Z-W, Pourkashanian M, Ma L & Ingham DB (2011) Overview of fuel injection techniques for scramjet engines. Proceedings of the ASME Turbo Expo, Vol. 2(PARTS A AND B) (pp 17-24)
- Carcadea E, Varlam M, Stefanescu I, Ingham DB, Tanislav V & Ene H (2011) Mathematical investigation and CFD simulation of methane steam reforming in a membrane reactor. EFC 2011 - Proceedings of the 4th European Fuel Cell Piero Lunghi Conference and Exhibition (pp 331-332)
- Luo S-B, Huang W, Qin H, Wang Z-G, Liu J, Xia Z-X, Lei J, Pourkashanian M, Ma L, Ingham DB & Luo W-L (2011) Investigation of turbulent models for the flow field from a typical strut-based scramjet combustor. Proceedings of the ASME Turbo Expo, Vol. 2(PARTS A AND B) (pp 25-31)
- Oguntade HI, Andrews GE, Burns A, Ingham DB & Pourkashanian M (2011) Improved trench film cooling with shaped trench outlets. Proceedings of the ASME Turbo Expo, Vol. 5(PARTS A AND B) (pp 127-136)
- Wang S, Ma L, Ingham DB, Pourkashanian M & Tao Z (2010) Turbulence modelling of deep dynamic stall at low Reynolds number. WCE 2010 - World Congress on Engineering 2010, Vol. 2 (pp 1350-1355)
- Wang S, Tao Z, Wang S, Ma L, Ingham DB & Pourkashanian M (2010) RETRACTED ARTICLE: Numerical investigations on dynamic stall associated with low reynolds number flows over airfoils. ICCET 2010 - 2010 International Conference on Computer Engineering and Technology, Proceedings, Vol. 5
- Huang W, Luo S-B, Pourkashanian M, Ma L, Ingham DB, Liu J & Wang Z-G (2010) Numerical simulations of a typical hydrogen fueled scramjet combustor with a cavity flameholder. WCE 2010 - World Congress on Engineering 2010, Vol. 2 (pp 1000-1003)
- (2010) CFD predictions of single row film cooling with inclined holes: Influence of hole outlet geometry. Proceedings of the ASME Turbo Expo, Vol. 4(PARTS A AND B) (pp 1371-1385)
- (2009) The boundary element method for the determination of nonlinear boundary conditions in heat conduction. WIT Transactions on Modelling and Simulation, Vol. 49 (pp 45-55)
- Rosli MI, Pourkashanian M, Ingham D, Ma L, Borman DJ & Ismail M (2009) Transparent PEM Fuel Cells for Direct visualization Experiments. 2009 Proceedings of the ASME 7th International Fuel Cell Science, Engineering and Technology Conference(FuelCell2009-85089) (pp 329-337). The Marriott Newport Beach Hotel and Spa, Newport Beach, California, 8 June 2009 - 10 June 2009.
- (2009) Through-plane permeability for untreated and PTFE-treated gas diffusion layers in proton exchange membrane fuel cells. Proceedings of the 7th International Conference on Fuel Cell Science, Engineering, and Technology 2009 (pp 713-721)
- Carcadea E, Ingham DB, Stefanescu I, Elena R & Ene IH (2009) The influence of permeability changes for a 7-serpentine channel PEM fuel cell performance. EFC 2009 - Piero Lunghi Conference, Proceedings of the 3rd European Fuel Cell Technology and Applications Conference (pp 131-132)
- (2009) Reduction of pollutants emissions from domestic boilers - CFD study. ASME International Mechanical Engineering Congress and Exposition, Proceedings, Vol. 3 (pp 229-238)
- (2009) On the multicomponent mass transport in an anode-supported solid oxide fuel cell. EFC 2009 - Piero Lunghi Conference, Proceedings of the 3rd European Fuel Cell Technology and Applications Conference (pp 185-186)
- (2009) Effect of MPL-coating on through-plane permeability of gas diffusion layers. EFC 2009 - Piero Lunghi Conference, Proceedings of the 3rd European Fuel Cell Technology and Applications Conference (pp 255-256)
- (2009) Application of rans and FWH modelling to the prediction of noise from round jets. Proceedings of the ASME Turbo Expo, Vol. 2 (pp 525-533)
- Trucu D, Ingham DB & Lesnic D (2009) An inverse coefficient identification problem for the bio-heat equation. Inverse Problems in Science and Engineering, Vol. 17(1) (pp 65-83)
- Trucu D, Ingham DB & Lesnic D (2008) Inverse time-dependent perfusion coefficient identification. Journal of Physics: Conference Series, Vol. 124 (pp 012050-012050)
- (2008) Simple scheduled memetic algorithm for inverse problems in higher dimensions: Application to chemical kinetics. 2008 IEEE Congress on Evolutionary Computation, CEC 2008 (pp 3905-3912)
- (2008) Computational fluid dynamic prediction of noise from a cold turbulent propane jet. Proceedings of the ASME Turbo Expo, Vol. 3(PART B) (pp 645-652)
- (2008) A parametrical study of a seven serpentine channel PEM fuel cell. Proceedings of the ASME Turbo Expo, Vol. 2 (pp 763-770)
- Yusop NM, Andrews GE, Ingham DB, Khalifa IM, Mkpadi MC & Pourkashanlan M (2007) Predictions of adiabatic film cooling effectiveness for effusion film cooling. Proceedings of the ASME Turbo Expo, Vol. 4 PART A (pp 457-464)
- (2007) Fitness diversity based adaptive memetic algorithm for solving inverse problems of chemical kinetics. 2007 IEEE Congress on Evolutionary Computation, CEC 2007 (pp 2366-2373)
- Ingham DB, Al-Hadhrami AK, Elliott L & Wen X (2006) Fluid Flows Through Some Geological Discontinuities. Journal of Applied Mechanics, Vol. 73(1) (pp 34-34)
- (2005) Implementation of an interface between a CFD energy analysis and an IFC building product model. Proceedings of the International Conference on Information Visualisation, Vol. 2005 (pp 277-286)
- Curteanu AE, Elliott L, Ingham DB & Lesnic D (2005) The Almansi decomposition for solving direct and inverse Stokes problems. Boundary Elements XXVII: Incorporating Electrical Engineering and Electromagnetics, Vol. 39 (pp 223-232)
- (2004) The use of a coarse BEM mesh to speed up the optimisation process in inverse electrical impedance tomography. International Series on Advances in Boundary Elements, Vol. 19 (pp 239-248)
- Marin L, Elliott L, Heggs PJ, Ingham DB, Lesnic D & Wen X (2004) Analysis of polygonal fins using the boundary element method. Applied Thermal Engineering, Vol. 24(8-9) (pp 1321-1339)
- Wade AS, Ingham DB, Kyne AG, Mera NS, Pourkashanian M & Wilson CW (2004) Optimisation of the Arrhenius parameters in a semi-detailed mechanism for jet fuel thermal degradation using a genetic algorithm.. ASME Turbo Expo 2004: Land, Sea and Air
- Elliott L, Ingham DB, Kyne AG, Mera NS, Pourkashanian M & Wilson CW (2004) A novel approach to mechanism reduction optimisation for aviation fuel/air reaction mechanism using a genetic algorithm. Proceedings of the ASME Turbo Expo 2004, Vol. 1 (pp 1-10)
- Elliott L, Ingham DB, Kyne AG, Mera NS, Pourkashanian M & Whittaker S (2004) Efficient clustering-based genetic algorithms in chemical kinetic modelling. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), Vol. 3103 (pp 932-944)
- Mera NS, Ingham DB & Elliott L (2004) Genetic algorithms and their application to the identification of hydraulic properties of rocks. EMERGING TECHNOLOGIES AND TECHNIQUES IN POROUS MEDIA (pp 131-155)
- Ingham DB (2004) Governing equations for laminar flows through porous media - A new look at viscous dissipation. EMERGING TECHNOLOGIES AND TECHNIQUES IN POROUS MEDIA (pp 1-11)
- Curteanu A, Ingham DB, Elliott L & Lesnic D (2004) Laplacian decomposition of steady free convection in porous media. EMERGING TECHNOLOGIES AND TECHNIQUES IN POROUS MEDIA (pp 119-129)
- Harris SD & Ingham DB (2004) Techniques for solving the boundary-layer equations - Analytical and numerical approaches. EMERGING TECHNOLOGIES AND TECHNIQUES IN POROUS MEDIA (pp 43-64)
- (2003) The detection of subsurface inclusions using internal measurements and genetic algorithms. International Series on Advances in Boundary Elements, Vol. 18 (pp 3-13)
- Elliott L, Ingham DB, Kyne AG, Mera NS, Pourkashanian M & Wilson CW (2003) A novel approach to the optimisation of reaction rate parameters for methane combustion using multi-objective genetic algorithms. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, Vol. 2 (pp 27-36)
- Cattle BA, Elliott L, Fellerman AS, Ingham DB, Lesnic D & West RM (2003) High–energy gamma–ray tomography in the nuclear industry. 3rd World Congress on Industrial Process Tomography (pp 96-101)
- (2002) The solution of the two-dimensional stokes equations. International Series on Advances in Boundary Elements, Vol. 13 (pp 671-678)
- Wilson CW, Elliott L, Ingham DB, Kyne AG, Mera NS & Pourkashanian M (2002) A real coded genetic algorithm for the optimization of reaction rate parameters or chemical kinetic modelling in a perfectly stirred reacto. Proceedings of Genetic and Evolutionary Computation Conference (pp 138-144). New York
- (2002) The optimisation of reaction rate parameters for chemical kinetic modelling using genetic algorithms. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, Vol. 1 (pp 563-572)
- Elliott L, Ingham DB, Kyne AG, Mera NS, Pourkashanian M & Wilson CW (2002) A Real Coded Genetic Algorithm For The Optimisation Of Reaction Rate Parameters For Chemical Kinetic Modelling In A Perfectly Stirred Reactor.. GECCO (pp 1261-1261)
- Orunov B, Korobkov A, Makhkamova I & Ingham DB (2001) Some results of preliminary bench tests on a 3-kW
e Stirling Engine based co-generation unit. Proceedings of the Intersociety Energy Conversion Engineering Conference, Vol. 1 (pp 405-410) - (2001) The effect of surface tension and surface friction on the free surface flow in a two-dimensional channel. Boundary Elements, Vol. 3 (pp 155-162)
- (2001) Determination of the Temperature Distribution in a Combustion Chamber for a Stirling Engine. Proceedings of the Intersociety Energy Conversion Engineering Conference, Vol. 1 (pp 411-416)
- Makhkamov K, Trukhov V, Orunov B, Korobkov A, Lejebokov A, Tursunbaev I, Orda E, Chuvichkin V, Yudin G, Muhamediev E & Ingham DB (2000) Development of Solar and Micro Co-generation power installations on the basis of Stirling Engines. 35th Intersociety Energy Conversion Engineering Conference and Exhibit (pp 723-733)
- Marin L, Elliott L, Ingham DB & Lesnic D (2000) Boundary element solution for the Cauchy problem in linear elasticity. International Series on Advances in Boundary Elements, Vol. 8 (pp 83-92)
- (2000) Solution of an inverse stokes problem using interior data. International Series on Advances in Boundary Elements, Vol. 8 (pp 221-230)
- Makhkamov K & Ingham DB (2000) Theoretical investigations on the stirling engine working process. 35th Intersociety Energy Conversion Engineering Conference and Exhibit (pp 101-110)
- (2000) A more accurate Green element method in two and three spatial dimensions. International Series on Advances in Boundary Elements, Vol. 8 (pp 191-199)
- (2000) Theoretical investigations on the Stirling engine working process. Proceedings of the Intersociety Energy Conversion Engineering Conference, Vol. 1 (pp 101-110)
- Makhkamov K, Trukhov V, Orunov B, Korobkov A, Lejebokov A, Tursunbaev I, Orda E, Chuvichkin V, Yudin G, Muhamediev E & Ingham DB (2000) Development of solar and micro co-generation power installations on the basis of Stirling engines. Proceedings of the Intersociety Energy Conversion Engineering Conference, Vol. 2 (pp 723-733)
- Robinson M & Ingham DB (2000) Design parameters for push-pull ventilation of open surface tanks. PROGRESS IN MODERN VENTILATION, VOL 2, PROCEEDINGS (pp 33-36)
- Trevelyan PMJ, Ingham DB & Elliott L (2000) The effects of ventilation and sash handles on the flow in fume cupboards. PROGRESS IN MODERN VENTILATION, VOL 2, PROCEEDINGS (pp 80-83)
- Harris SD, Mustata R, Elliott L, Ingham DB & Lesnic D (1999) Parameter identification within rocks using genetic algorithms. GECCO-99: PROCEEDINGS OF THE GENETIC AND EVOLUTIONARY COMPUTATION CONFERENCE (pp 1779-1779)
- Harris SD, Elliott L, Ingham DB, Pourkashanian M & Wilson CW (1999) The retrieval of chemical reaction rates using genetic algorithms. GECCO-99: PROCEEDINGS OF THE GENETIC AND EVOLUTIONARY COMPUTATION CONFERENCE (pp 1780-1780)
- Lonyangapou JK, Elliott L, Ingham DB & Wen X (1999) A boundary integral technique for solving for an unknown bottom surface given a free surface fluid flow. BOUNDARY ELEMENTS XXI, Vol. 6 (pp 365-374)
- Widodo B, Wen X & Ingham DB (1999) Flow induced by a submerged line sink in a three-layer fluid under the effects of both gravity and surface tension at infinite Froude numbers. BOUNDARY ELEMENTS XXI, Vol. 6 (pp 387-396)
- (1998) Cauchy problem for the biharmonic equation solved using the regularization method. Proceedings of the European Boundary Element Method Symposium (pp 285-294)
- (1998) Identification of the shape of the bottom surface of a channel from a given free surface profile. Proceedings of the European Boundary Element Method Symposium (pp 81-90)
- (1998) Identification of the hydraulic conductivity of a material in time-dependent diffusion problems: least-squares finite-difference and energy boundary element solutions. Proceedings of the International Conference on Inverse Problems in Engineering (pp 347-355)
- Lesnic D, Elliott L & Ingham DB (1998) An inverse coefficient identification problem for the heat equation. INVERSE PROBLEMS IN ENGINEERING MECHANICS (pp 11-16)
- Bradean R, Ingham DB & Heggs PJ (1998) Stefan problem in blow moulding operations. MATHEMATICS OF HEAT TRANSFER(66) (pp 89-96)
- Harris SD, Ingham DB & Pop I (1998) Transient mixed convection from a vertical surface in a porous medium. MATHEMATICS OF HEAT TRANSFER(66) (pp 157-164)
- Ma L, Ingham DB, Wen X & ENGINEERS IC (1997) A numerical simulation of the fluid flow and the collection efficiency of small personal cyclones. 1997 JUBILEE RESEARCH EVENT, VOLS 1 AND 2 (pp 253-256)
- Dombrowski N, Foumeny EA, Ingham DB, Pourmahabadian M & ENGINEERS IC (1997) Experimental study of the performance characteristics of personal samplers. 1997 JUBILEE RESEARCH EVENT, VOLS 1 AND 2 (pp 469-472)
- Bradean R, Ingham DB, Heggs PJ & ENGINEERS IC (1997) Finite-difference solutions for the blow moulding of polymers. 1997 JUBILEE RESEARCH EVENT, VOLS 1 AND 2 (pp 281-284)
- Zeb A, Elliott L, Ingham DB & Lesnic D (1997) Solution of the Cauchy problem for the biharmonic equation. BOUNDARY ELEMENTS XIX (pp 749-756)
- Miskin I, Elliott L, Ingham DB, Hammond PS & ENGINEERS IC (1997) Stability of suspension flows in a duct. 1997 JUBILEE RESEARCH EVENT, VOLS 1 AND 2 (pp 345-348)
- Wright SD, Elliott L, Ingham DB, Hewson MJC & ENGINEERS IC (1997) The effects of the Coriolis force on the direction of transportation of an airborne pollutant. 1997 JUBILEE RESEARCH EVENT, VOLS 1 AND 2 (pp 201-204)
- Halliwell JAK, Elliott L, Ingham DB & ENGINEERS IC (1997) The modelling of ventilation processes using computational fluid dynamics. 1997 JUBILEE RESEARCH EVENT, VOLS 1 AND 2 (pp 233-236)
- Hu PX, Ingham DB, Wen X & ENGINEERS IC (1997) Three-dimensional turbulent flow inside a fume cupboard and a room. 1997 JUBILEE RESEARCH EVENT, VOLS 1 AND 2 (pp 369-372)
- Elliott L, Ingham DB & Hewson MJC (1996) Interaction of the aerodynamic roughness length with the atmospheric boundary-layer. Proceedings of the International Conference on Development and Application of Computer Techniques to Environmental Studies (pp 331-340)
- Ingham DB (1996) Inverse and improperly-posed problems in heat transfer using the minimal energy technique. Proceedings of the World Conference on the Boundary Element Method, BEM (pp 107-116)
- (1996) Boundary integral technique for two-dimensional potential flows. Proceedings of the World Conference on the Boundary Element Method, BEM (pp 561-570)
- (1996) Transient free convection from a sphere embedded in a porous medium. International Symposium on Heat Transfer (pp 446-451)
- Wood J, Elliott L, Ingham DB, Unwin AT & ENGINEERS IC (1996) The mixed convection flow of fluids with temperature dependent viscosities in a vertical rectangular duct. 1996 ICHEME RESEARCH EVENT - SECOND EUROPEAN CONFERENCE FOR YOUNG RESEARCHERS IN CHEMICAL ENGINEERING, VOLS 1 AND 2 (pp 457-459)
- Miskin I, Elliott L, Ingham DB, Hammond PS & ENGINEERS IC (1996) The shear-induced diffusion occurring within a suspension entering a horizontal fracture. 1996 ICHEME RESEARCH EVENT - SECOND EUROPEAN CONFERENCE FOR YOUNG RESEARCHERS IN CHEMICAL ENGINEERING, VOLS 1 AND 2 (pp 460-462)
- Hu PX, Ingham DB, Wen X & ENGINEERS IC (1996) The convection of contaminant around the orifice of a fume cupboard. 1996 ICHEME RESEARCH EVENT - SECOND EUROPEAN CONFERENCE FOR YOUNG RESEARCHERS IN CHEMICAL ENGINEERING, VOLS 1 AND 2 (pp 684-686)
- Wen X, Manik K & Ingham DB (1996) A boundary integral technique for free surface flows under gravity. HYDRAULIC ENGINEERING SOFTWARE VI (pp 437-446)
- Foumeny EA, Ingham DB, Walker AJ & ENGINEERS IC (1996) A numerical investigation of turbulent flow through a cascade of plane symmetric channel expansions. 1996 ICHEME RESEARCH EVENT - SECOND EUROPEAN CONFERENCE FOR YOUNG RESEARCHERS IN CHEMICAL ENGINEERING, VOLS 1 AND 2 (pp 418-420)
- McCaffery SJ, Elliott L, Ingham DB, Unwin AT & ENGINEERS IC (1996) A two-dimensional model for particle sedimentation in narrow tilted channels. 1996 ICHEME RESEARCH EVENT - SECOND EUROPEAN CONFERENCE FOR YOUNG RESEARCHERS IN CHEMICAL ENGINEERING, VOLS 1 AND 2 (pp 427-429)
- Dombrowski N, Foumeny EA, Huang JH, Ingham DB & ENGINEERS IC (1996) Air flow around three dimensional deposition gauges. 1996 ICHEME RESEARCH EVENT - SECOND EUROPEAN CONFERENCE FOR YOUNG RESEARCHERS IN CHEMICAL ENGINEERING, VOLS 1 AND 2 (pp 430-432)
- Dombrowski N, Foumeny EA, Ingham DB, Pourmahabadian M & ENGINEERS IC (1996) Experimental and numerical investigation of flow along a solid cylinder.. 1996 ICHEME RESEARCH EVENT - SECOND EUROPEAN CONFERENCE FOR YOUNG RESEARCHERS IN CHEMICAL ENGINEERING, VOLS 1 AND 2 (pp 612-614)
- Bradean R, Ingham DB, Heggs PJ, Pop I & ENGINEERS IC (1996) Free convection from impulsively heated surfaces embedded in a porous media. 1996 ICHEME RESEARCH EVENT - SECOND EUROPEAN CONFERENCE FOR YOUNG RESEARCHERS IN CHEMICAL ENGINEERING, VOLS 1 AND 2 (pp 448-450)
- Lesnic D, Elliott L, Ingham DB & ENGINEERS IC (1996) Numerical inversion of atmospheric particle size distributions from diffusion battery data. 1996 ICHEME RESEARCH EVENT - SECOND EUROPEAN CONFERENCE FOR YOUNG RESEARCHERS IN CHEMICAL ENGINEERING, VOLS 1 AND 2 (pp 1051-1053)
- Robinson M, Ingham DB & ENGINEERS IC (1996) Push-pull ventilation: Numerical and mathematical models. 1996 ICHEME RESEARCH EVENT - SECOND EUROPEAN CONFERENCE FOR YOUNG RESEARCHERS IN CHEMICAL ENGINEERING, VOLS 1 AND 2 (pp 663-665)
- (1995) Numerical method for solving the backward heat conduction problem. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, Vol. 312(10)
- FOUMENY EA, INGHAM DB, WALKER AJ & ENGINEERS IC (1995) BIFURCATION OF INCOMPRESSIBLE FLOW IN A CASCADE OF PLANE SYMMETRIC CHANNEL EXPANSIONS. 1995 ICHEME RESEARCH EVENT - FIRST EUROPEAN CONFERENCE FOR YOUNG RESEARCHERS IN CHEMICAL ENGINEERING, VOLS 1 AND 2 (pp 632-634)
- INGHAM DB & YUAN Y (1995) Free surfaces in Stokes flow. BOUNDARY ELEMENTS XVII (pp 597-604)
- ROBINSON M, INGHAM DB & ENGINEERS IC (1995) MATHEMATICAL MODELLING OF PUSH-PULL VENTILATION. 1995 ICHEME RESEARCH EVENT - FIRST EUROPEAN CONFERENCE FOR YOUNG RESEARCHERS IN CHEMICAL ENGINEERING, VOLS 1 AND 2 (pp 722-724)
- BRADEAN R, INGHAM DB, HEGGS PJ, POP I & ENGINEERS IC (1995) PENETRATIVE CONVECTION IN A POROUS MEDIA WITH HOT AND COLD SPOTS. 1995 ICHEME RESEARCH EVENT - FIRST EUROPEAN CONFERENCE FOR YOUNG RESEARCHERS IN CHEMICAL ENGINEERING, VOLS 1 AND 2 (pp 772-774)
- DOMBROWSKI N, FOUMENY EA, INGHAM DB, HUANG JH, POURMAHABADIAN M & ENGINEERS IC (1995) PREDICTION AND VALIDATION OF FLOW OVER A BLUFF BODY. 1995 ICHEME RESEARCH EVENT - FIRST EUROPEAN CONFERENCE FOR YOUNG RESEARCHERS IN CHEMICAL ENGINEERING, VOLS 1 AND 2 (pp 784-786)
- Bradean R, Ingham DB, Heggs PJ, Pop I & IMECHE (1995) Steady free convection adjacent to a heated and cooled horizontal or vertical flat surface in a porous media. 4TH UK NATIONAL CONFERENCE ON HEAT TRANSFER, Vol. 1995(2) (pp 159-163)
- Wood J, Elliott L, Ingham DB, Unwin AT & IMECHE (1995) The mixed convection flow of generalised Newtonian fluids in a vertical fracture. 4TH UK NATIONAL CONFERENCE ON HEAT TRANSFER, Vol. 1995(2) (pp 207-211)
- MISKIN I, ELLIOTT L, INGHAM DB, HAMMOND PS & ENGINEERS IC (1995) THE RESUSPENSION OF PARTICLES IN A FRACTURE. 1995 ICHEME RESEARCH EVENT - FIRST EUROPEAN CONFERENCE FOR YOUNG RESEARCHERS IN CHEMICAL ENGINEERING, VOLS 1 AND 2 (pp 411-413)
- (1994) Boundary element method for an improperly posed problem in unsteady heat conduction. International Conference on Boundary Element Technology (pp 77-84)
- WOOD J, ELLIOTT L, INGHAM DB & UNWIN AT (1994) THE MIXED CONVECTION FLOW OF NEWTONIAN AND NON-NEWTONIAN FLUIDS IN A VERTICAL FRACTURE. HEAT TRANSFER 1994 - PROCEEDINGS OF THE TENTH INTERNATIONAL HEAT TRANSFER CONFERENCE, VOL 5(135) (pp 591-596)
- FOUMENY EA, INGHAM DB, WALKER AJ & ENGINEERS IC (1994) A NUMERICAL INVESTIGATION INTO POLLUTANT CONTROL USING AN AABERG EXHAUST HOOD. 1994 ICHEME RESEARCH EVENT, VOLS 1 AND 2 (pp 308-310)
- MOORE I, MOBBS SD, INGHAM DB & KING JC (1994) A NUMERICAL MODEL OF BLOWING SNOW AROUND AN ANTARCTIC BUILDING. ANNALS OF GLACIOLOGY, VOL 20, 1994, Vol. 20 (pp 341-346)
- MCCAFFERY SJ, ELLIOTT L, INGHAM DB, UNWIN AT & ENGINEERS IC (1994) PARTICLE SETTLING IN AN HYDRAULIC FRACTURE. 1994 ICHEME RESEARCH EVENT, VOLS 1 AND 2 (pp 1120-1122)
- PATEL N & INGHAM DB (1994) STEADY MIXED CONVECTION IN AN ECCENTRIC ANNULUS. HEAT TRANSFER 1994 - PROCEEDINGS OF THE TENTH INTERNATIONAL HEAT TRANSFER CONFERENCE, VOL 5(135) (pp 543-548)
- INGHAM DB & YUAN Y (1994) THE APPLICATION OF THE BOUNDARY-ELEMENT METHOD TO A TIME-DEPENDENT INVERSE HEAT-CONDUCTION PROBLEM. BOUNDARY ELEMENT METHOD XVI (pp 157-164)
- LESNIC D, ELLIOTT L, INGHAM DB & ENGINEERS IC (1994) THE COLLECTION EFFICIENCY OF OBSTACLES. 1994 ICHEME RESEARCH EVENT, VOLS 1 AND 2 (pp 1157-1159)
- HU PX, INGHAM DB, WEN X & ENGINEERS IC (1994) THE LEAKAGE OF CONTAMINANT FROM A FUME CUPBOARD. 1994 ICHEME RESEARCH EVENT, VOLS 1 AND 2 (pp 1172-1174)
- WOOD J, ELLIOTT L, INGHAM DB, UNWIN AT & ENGINEERS IC (1994) THE MIXED CONVECTION FLOW OF A NEWTONIAN FLUID IN A VERTICAL FRACTURE. 1994 ICHEME RESEARCH EVENT, VOLS 1 AND 2 (pp 1175-1177)
- WATSON P, INGHAM DB & HEGGS PJ (1993) Modelling recirculating mixed convection using a composite mesh technique. NUMERICAL METHODS IN THERMAL PROBLEMS, VOL VIII, PTS 1 AND 2 (pp 943-954)
- PATEL N & INGHAM DB (1993) THE MIXED CONVECTION FLOW OF A BINGHAM PLASTIC IN AN ECCENTRIC ANNULUS. TRANSPORT PHENOMENA IN THERMAL ENGINEERING, VOLS 1 AND 2 (pp 179-184)
- (1992) Mixed convection flow of non-Newtonian fluids in parallel-plate ducts and in eccentric annuli. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, Vol. 201 (pp 71-78)
- (1992) Mixed convection flow in a vertical duct with an applied linear temperature gradient. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, Vol. 201 (pp 79-86)
- (1992) Boundary element solution of a viscous free surface problem (pp 155-166)
- INGHAM DB (1992) Flow past bluff bodies. INTERNATIONAL SYMPOSIUM ON NONLINEAR PROBLEMS IN ENGINEERING AND SCIENCE (pp 98-112)
- (1991) Numerical solution of viscous flows with a free surface. Computational Modelling of Free and Moving Boundary Problems (pp 325-339)
- (1991) Free surface flow induced by a submerged source or sink from a three-layer fluid. Computational Modelling of Free and Moving Boundary Problems (pp 261-275)
- (1991) Free surface flow formed by a slot suction. Computational Modelling of Free and Moving Boundary Problems (pp 277-291)
- (1987) EXPERIMENTAL AND NUMERICAL INVESTIGATIONS INTO RECIRCULATING COMBINED CONVECTION IN LAMINAR PIPE FLOW.. American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, Vol. 61 (pp 331-340)
- Gardner D (1986) CONJUGATE HEAT TRANSFER FROM A DOWNWARD PROJECTING FIN IMMERSED IN A POROUS MEDIUM.. Heat Transfer, Proceedings of the International Heat Transfer Conference, Vol. 5 (pp 2635-2640)
- (1984) HEAT TRANSFER FOR LAMINAR FLOW IN THE ENTRANCE REGION OF A SMOOTH PIPE.. Institution of Chemical Engineers Symposium Series(86) (pp 1091-1096)
- Heggs PJ & Stones PR (1983) TWO-DIMENSIONAL ANALYSIS OF FIN ASSEMBLY HEAT TRANSFER: A COMPARISON OF SOLUTION TECHNIQUES. (pp 135-148)
- (1983) BOUNDARY INTEGRAL EQUATION METHOD FOR THE STUDY OF SLOW FLOW WITHIN BEARING GEOMETRIES. (pp 311-321)
- Ingham DB & Kelmanson MA (1983) SOLUTION OF NONLINEAR ELLIPTIC EQUATIONS WITH BOUNDARY SINGULARITIES BY AN INTEGRAL EQUATION METHOD. (pp 61-71)
- Ingham DB & Laverack SD (1980) ANALYSIS OF BOUNDARY LAYER EFFECTS IN A HYDROCYCLONE. (pp 49-62)
- INGHAM D, EISBERG R & MAKINO M (1972) SMALL-ANGLE INELASTIC-SCATTERING OF 40 MEV PROTONS BY C-12, CA-40, FE-56, AND NI-58. BULLETIN OF THE AMERICAN PHYSICAL SOCIETY, Vol. 17(4) (pp 604-&)
- Daood S, Nimmo W, Rizvi A, Javed T, Ingham D & Pourkashanian M () Reactivity analysis of Tharparker lignite coal under air, oxygen enriched air and oxyfuel reaction atmospheres in a thermogravimetric analyser. UK Pakistan Coal Conference. Leeds, 3 July 2012 - 5 July 2012.
- Akram M, Ali , hughes K, pourkashanian M & ingham D () Sensitivity analysis of post-combustion CO2 capture at pilot scale level. 3rd Post Combustion Capture Conference (PCCC3). Regina, 8 September 2015 - 11 September 2015.