BENG Electrical Engineering with a Year in Industry (EEEU55) IS

2015 - 2016

Year 1

Core These are a compulsory part of your degree: you cannot change them. units (120 credits)

A student will take

Semester 1
FCE1001	Global Engineering Challenge Week	AUT SEM	0 credits
Semester 2
EEE124 + Only available to students in Electronic and Electrical Engineering.	Introduction to Energy	SPR SEM	10 credits
Full academic year
EEE117 + EEE entry requirements - A level Maths and Physics or equivalent.. No. No.	Electrical Circuits and Networks	ACAD YR	20 credits
EEE118 + EEE entry requirements - A level Maths and Physics or equivalent.. No. No.	Electronic Devices and Circuits	ACAD YR	20 credits
EEE119 + EEE entry requirements - A level Maths and Physics or equivalent.. No. No. No.	Digital System Engineering	ACAD YR	20 credits
EEE160 + 'A' or 'AS' Maths or equivalent. 'AS' Level Physics or equivalent..	Coursework Year 1	ACAD YR	20 credits
EEE163 + Only available to students in Electronic and Electrical Engineering.	System Design Analysis	ACAD YR	10 credits
MAS156 P⇒Is a pre-requisite for: AER201 MAS241 MAS381 (when the module is running) + Unrestricted - only subject to availability. This module is for students in EEE and Aerospace Engineering..	Mathematics (Electrical)	ACAD YR	20 credits

A student may be required to substitute EEE163 with EEE112 Engineering Applications of Mathematics depending on the outcome of the maths skills assessment held in Intro Week.

Year 2

Core These are a compulsory part of your degree: you cannot change them. units (80 credits)

A student will take

Semester 1
FCE2001 + Yes. Restricted to second year Faculty of Engineering students.	Engineering - You're Hired	AUT SEM	0 credits
MAS241 ⇐P⇒Pre-requisites: MAS156 Is a pre-requisite for: MAS381 (when the module is running) XCannot be taken with: AER201 + This module is for students in EEE..	Mathematics II (Electrical)	AUT SEM	10 credits
Full academic year
EEE223	Electrical Energy Management and Conversion	ACAD YR	20 credits
EEE224 P⇒Is a pre-requisite for: ACS342 (when the module is running)	Communication Electronics	ACAD YR	20 credits
EEE225	Analogue and Digital Electronics	ACAD YR	20 credits
EEE226	Engineering Software Design	ACAD YR	10 credits

Approved These are on a restricted list of modules offered by your department(s). Normally you will need to select a minimum number of credits from the list. units (40 credits)

A student will take 40 credits from this group.

Semester 2
MGT389 CCo-requisites: BIE372	Project Management and HRM for Engineers	SPR SEM	10 credits
Full academic year
EEE260	Coursework Year 2	ACAD YR	20 credits
EEE262	Coursework	ACAD YR	30 credits

a student can take unrestricted MLT units to the value of 20 credits.

Before proceeding to Level 3 a candidate shall undertake an Industrial Project, the arrangements being subject to the approval of the Head of Department.

A student must normally achieve a weighted mean grade of 55 or above at Level 2 in order to proceed to the Year in Industry, progression being at the discretion of the Head of Department. A student who fails to progress may be permitted to become instead a candidate for the Degree of BEng Electrical Engineering (EEEU01).

Year 3

Core These are a compulsory part of your degree: you cannot change them. units (120 credits)

A student will take

Full academic year
EEE394	Year In Industry	ACAD YR	120 credits

A student will be responsible for securing a suitable industrial placement in order to take EEE394. The placement will be subject to the approval of the Head of Department. A student who fails to obtain a suitable placement will instead be required to become a student for the Degree of BEng Electrical Engineering (EEEU01).

EEE394 requires that a student will spend a minimum of 38 weeks working in an industrial establishment, the arrangements being subject to the approval of the Head of Department. The Year in Industry will be assessed on (a) written reflections on skills-based placement journal; (b) two written reports; and (c) a post-placement presentation. No grades will be awarded for the Year in Industry which will be assessed on a pass/fail basis. A student who fails to satisfy these requirements may be permitted by the Faculty to become instead a student for the Degree of BEng in Electrical Engineering (EEEU01).

Year 4

Core These are a compulsory part of your degree: you cannot change them. units (100 credits)

A student will take

Semester 1
ACS342 ⇐PPre-requisites: EEE224 + EEE224 or equivalent.	Feedback Systems Design	AUT SEM	10 credits
MGT388	Finance and Law for Engineers	AUT SEM	10 credits
Semester 2
EEE307	Power Electronics	SPR SEM	10 credits
Full academic year
EEE338 XCannot be taken with: EEE301 EEE301 EEE341	Power Engineering	ACAD YR	20 credits
EEE350 XCannot be taken with: EEE305 EEE345 EEE349	Electromagnetic Fields and Devices	ACAD YR	20 credits
EEE360	Individual Design Project	ACAD YR	30 credits

Approved These are on a restricted list of modules offered by your department(s). Normally you will need to select a minimum number of credits from the list. units (20 credits)

A student will take 20 credits from this group.

Semester 1
EEE317 XCannot be taken with: EEE334 EEE347	Principles of Communications	AUT SEM	10 credits
EEE335 XCannot be taken with: EEE337 EEE348	Integrated Electronics	AUT SEM	10 credits
EEE336 XCannot be taken with: EEE309 EEE339	Digital Design	AUT SEM	10 credits
MAS381 ⇐PPre-requisites: MAS156 MAS241 + This module is for students in EEE..	Mathematics III (Electrical)	AUT SEM	10 credits
Semester 2
EEE309 XCannot be taken with: EEE336 EEE339	Introduction to Digital Signal Processing	SPR SEM	10 credits
EEE334 XCannot be taken with: EEE317	Antennas, Radar and Navigation	SPR SEM	10 credits
EEE337 XCannot be taken with: EEE335 EEE348	Semiconductor Electronics	SPR SEM	10 credits
Full academic year
EEE339 XCannot be taken with: EEE309 EEE336	Digital Engineering	ACAD YR	20 credits
EEE347 XCannot be taken with: EEE317	Communication Engineering	ACAD YR	20 credits
EEE348 XCannot be taken with: EEE335 EEE337	Electronics and Devices	ACAD YR	20 credits

Or units not listed subject to the approval of the Head of Department and availability on the timetable.

A student who does not pass EEE360 (Individual Design Project) at the first attempt will be ineligible for the award of the Degree of BEng in Electrical Engineering with a Year in Industry with Honours.

⇐P	-	This module has pre-requisite(s).
P⇒	-	This module is a pre-requisite for other modules.
C	-	This module has co-requisite(s).
X	-	Some modules cannot be studied in combination with this module.
+	-	Additional information about requirements for studying this module.

Please note that the regulations displayed on this page reflect provision in 2015/16 and may not reflect study undertaken in other academic sessions. To see regulations that applied in another academic session, please return to the Programme Regulations Finder home screen and select the appropriate session.