MENG Structural Engineering and Architecture with a Year in Industry (CIVU112) IS

2021 - 2022

For students whose initial registration was in the 2022-23 session or earlier

Year 1

Core These are a compulsory part of your degree: you cannot change them. units (120 credits)

A student will take

Semester 1
ARC103 P⇒Is a pre-requisite for: ARC104 ARC201 ARC205 ARC209 (when the module is running) CCo-requisites: ARC150 LSC135	Humanities 1	AUT SEM	10 credits
ARC107 P⇒Is a pre-requisite for: ARC201 ARC205 ARC209 ARC357 (when the module is running)	Environment and Technology 1	AUT SEM	10 credits
FCE1001	Global Engineering Challenge Week	AUT SEM	0 credits
MAT1600 XCannot be taken with: MAT1601 + This Unit is restricted to students studying on CIVU... programmes..	Introduction to Structural Materials Engineering	AUT SEM	10 credits
Semester 2
ARC104 P⇒Is a pre-requisite for: ARC201 ARC205 ARC209 (when the module is running) CCo-requisites: ARC150	Humanities 2	SPR SEM	10 credits
ARC108 P⇒Is a pre-requisite for: ARC201 ARC205 ARC209 ARC357 (when the module is running) + Yes: Module restricted to students enrolled in Architecture BA, Architecture & Landscape Architecture BA, and Structural Engineering & Architecture BA Dual course as delivered by the School of Architecture..	Environment and Technology 2	SPR SEM	10 credits
CIV150 P⇒Is a pre-requisite for: CIV4501 (when the module is running)	Geotechnical Engineering 1	SPR SEM	10 credits
Full academic year
CIV1000	Civil and Structural Engineering Mechanics 1	ACAD YR	20 credits
CIV1900	Civil Engineering Skills	ACAD YR	20 credits
MAS151 P⇒Is a pre-requisite for: MAS380 (when the module is running) + Unrestricted - only subject to availability. This module is for students in Civil Engineering..	Civil Engineering Mathematics	ACAD YR	20 credits

Following first failure of any ARC unit, subject to the approval of the Board of Examiners, a student will be exempted from the provisions regarding the number of resit attempts in Regulations 36 and 39 of the General Regulations for first degrees. A student satisfying the Examiners in a subsequent examination will be awarded a bare pass grade in respect of that component. In the event that the grade achieved following a subsequent examination is lower than that achieved on a previous occasion, the higher grade will be awarded.

A student must pass units ARC107, ARC108, ARC103, ARC104, CIV1000, CIV150, CIV1900, MAS151 and MAT1600 to proceed to Level 2.

A student will be expected to pass FCE1001 (Global Engineering Challenge Week) in order to proceed to Level 3. A student must pass this module in order to graduate.

Year 2

Core These are a compulsory part of your degree: you cannot change them. units (120 credits)

A student will take

Semester 1
ARC165 + n/a. n/a.	Architectural Design 1 (Dual Architecture and Engineering)	AUT SEM	20 credits
CIV2501 P⇒Is a pre-requisite for: CIV4501 (when the module is running)	Geotechnical Engineering 2a	AUT SEM	10 credits
FCE2001 + Yes. Restricted to second year Faculty of Engineering students.	Engineering - You're Hired	AUT SEM	0 credits
MAS252 P⇒Is a pre-requisite for: MAS380 (when the module is running) + This module is compulsory for students in Civil Engineering..	Further Civil Engineering Mathematics and Computing	AUT SEM	10 credits
Semester 2
ARC126 P⇒Is a pre-requisite for: ARC357 (when the module is running)	Architectural Design 2	SPR SEM	30 credits
MAT2600	Materials for Structural Engineering	SPR SEM	10 credits
Full academic year
CIV2100	Structural Analysis I	ACAD YR	20 credits
CIV2200 P⇒Is a pre-requisite for: CIV413 CIV4175 CIV4201 (when the module is running) XCannot be taken with: CIV2201	Structural Engineering Design and Appraisal	ACAD YR	20 credits

A student must pass units ARC165, ARC126, CIV2100, CIV2200, MAS252, MAT2600 and CIV2501 to proceed to Level 3.

A student must have been awarded 120 credits at level 2 and obtained a weighted mean grade of greater than or equal to 54.5 to proceed to Level 3. A student who does not fulfill these criteria will be transferred onto either (a) the MEng Structural Engineering with Architectural Studies (CIVU19) if a minimum of 100 credits have been awarded at Level 2 and a weighted mean grade of greater than or equal to 54.5 achieved, or (b) the BEng Structural Engineering with Architectural Studies (CIVU20) if the above criteria have not been met.

A student will be expected to pass FCE2001 (Engineering - You're Hired) in order to proceed to Level 3. A student must pass this module in order to graduate.

Year 3

Core These are a compulsory part of your degree: you cannot change them. units (120 credits)

A student will take

Semester 1
ARC203 CCo-requisites: ARC250 ARC260 ARC350	Humanities 3	AUT SEM	10 credits
ARC207 P⇒Is a pre-requisite for: ARC357 (when the module is running)	Environment and Technology 3	AUT SEM	10 credits
ARC275 P⇒Is a pre-requisite for: ARC254 ARC278 ARC357 ARC375 (when the module is running) CCo-requisites: ARC253	Project Design 53	AUT SEM	20 credits
CIV312	Advanced Structural Analysis	AUT SEM	10 credits
CIV321 P⇒Is a pre-requisite for: CIV4201 (when the module is running)	Advanced Structural Design and Appraisal	AUT SEM	10 credits
Semester 2
ARC204 P⇒Is a pre-requisite for: ARC325 (when the module is running)	Humanities 4	SPR SEM	10 credits
ARC208 P⇒Is a pre-requisite for: ARC325 ARC357 (when the module is running)	Environment and Technology 4	SPR SEM	10 credits
ARC226 P⇒Is a pre-requisite for: ARC325 (when the module is running) CCo-requisites: ARC254 ARC278	Architectural Design 4	SPR SEM	30 credits
CIV377	Construction Project Management	SPR SEM	10 credits

A student must pass units ARC207, ARC208, ARC226, ARC203, ARC204, ARC275, CIV312, CIV321 and CIV377 to proceed to Level 4.

A student must have been awarded 120 credits at Level 3 to proceed to Level 4. A student who does not fulfill these criteria may be transferred onto the MEng Structural Engineering with Architectural Studies (CIVU19) programme, if a minimum of 110 credits have been awarded at Level 3. A student who fails to satisfy this requirement may be permitted by the Faculty to be awarded the Degree of BEng Structural Engineering with Architectural Studies (CIVU20) but will be ineligible for the award of that Degree with Honours.

Year 4

Core These are a compulsory part of your degree: you cannot change them. units (120 credits)

A student will take

Full academic year
CIV395 + CIVU27, CIVU26, CIVU30 , CIVU31 only..	Year in Industry	ACAD YR	120 credits

A student will take CIV395 Year in Industry before proceeding to Level 5. A student will be responsible for securing a suitable industrial placement in order to take CIV395 Year in Industry. The appropriateness of the placement will be determined by the department's Year in Industry Tutor. A student who fails to obtain a suitable placement will instead be required to become a student for the degree of MEng in Structural Engineering and Architecture (CIVU12).

CIV395 requires that a student will spend a minimum of 38 weeks working in an industrial establishment, the arrangements being subject to the approval of the department's Year in Industry Tutor. A student who fails to satisfy these requirements may be permitted by the Faculty to become instead a student for the degree MEng Structural Engineering and Architecture (CIVU12).

Year 5

Core These are a compulsory part of your degree: you cannot change them. units (105 credits)

A student will take

Semester 1
ARC327	Advanced Structures and Environment	AUT SEM	10 credits
CIV406 + Only available to students on CIVU12. Not suitable for visiting students..	Advanced Structural Systems	AUT SEM	10 credits
CIV485	Civil Engineering Research Proposal	AUT SEM	5 credits
Semester 2
ARC356	Architectural Design 6 (Dual Architecture & Engineering)	SPR SEM	20 credits
ARC378	Environment and Technology 6	SPR SEM	10 credits
Full academic year
ARC375 CCo-requisites: ARC316 ARC357	Project Design 55	ACAD YR	20 credits
CIV4009	Independent Research Project for Structural Engineering And Architecture	ACAD YR	30 credits

Approved These are on a restricted list of modules offered by your department(s). Normally you will need to select a minimum number of credits from the list. units (15 credits)

A student will take 15 credits from this group.

Semester 1
CIV4181	Structural Dynamics and Applications to Vibration Design	AUT SEM	15 credits
CIV61016	Parametric Modelling and Computational Design	AUT SEM	15 credits

Following the failure of an ARC Semester 1 module, or CIV406, to the maximum value of ten credits taken at Level 5, a student will be allowed to resit the module within the same academic session in order to satisfy the programme's accreditation requirements.

When the department has approved a Change of Status to transfer from a RIBA accredited programme to a programme that is not RIBA accredited, a student should be allowed to have their component marks for architecture modules averaged and any associated credits released. Students who benefit from this regulation whereby a module may be passed without all components being passed would not be eligible to transfer back onto the accredited course.

A student must pass CIV4009 (Independent Research Project) at the first attempt in order to be eligible for the award of the Degree of MEng in Structural Engineering and Architecture with a Year in Industry (CIVU112). A student who fails to satisfy this requirement may be awarded the Degree of BEng in Structural Engineering with Architectural Studies with a Year in Industry (CIVU120) but will be ineligible for the award of that Degree with Honours.

A student must pass units ARC356, ARC327, ARC375, ARC378 and CIV406 in order to be eligible for the award of MEng in Structural Engineering and Architecture (CIVU12). A student must also achieve a grade of greater than or equal to 40 in CIV4181 or CIV61016, and CIV485 in order to be eligible for the award of MEng in Structural Engineering and Architecture with a Year in Industry (CIVU112). A student who fails to meet this requirement, but fulfills the general regulations in relation to First Degrees, may be permitted by the Faculty to be awarded the Degree of MEng in Structural Engineering with Architectural Studies with a Year in Industry (CIVU119)

⇐P	-	This module has pre-requisite(s).
P⇒	-	This module is a pre-requisite for other modules.
C	-	This module has co-requisite(s).
X	-	Some modules cannot be studied in combination with this module.
+	-	Additional information about requirements for studying this module.

Please note that the regulations displayed on this page reflect provision in 2021/22 and may not reflect study undertaken in other academic sessions. To see regulations that applied in another academic session, please return to the Programme Regulations Finder home screen and select the appropriate session.