BENG Civil Engineering with an Industrial Placement Year (CIVU27) IS

2023 - 2024

For students whose initial registration was for the 2023-24 session or later

Year 1

Core These are a compulsory part of your degree: you cannot change them. units (120 credits)

A student will take

Semester 1
CIV116	Sustainable Design and Engineering Skills	AUT SEM	10 credits
FCE1001	Global Engineering Challenge Week	AUT SEM	0 credits
MAT1600 XCannot be taken with: MAT1601 + This Unit is restricted to students studying on CIVU... programmes..	Introduction to Structural Materials Engineering	AUT SEM	10 credits
Semester 2
CIV106	Engineering Surveying	SPR SEM	10 credits
CIV150 P⇒Is a pre-requisite for: CIV4501 (when the module is running)	Geotechnical Engineering 1	SPR SEM	10 credits
Full academic year
CIV1000	Civil and Structural Engineering Mechanics 1	ACAD YR	20 credits
CIV105	Practical Application of Civil and Structural Engineering	ACAD YR	20 credits
CIV107 P⇒Is a pre-requisite for: CIV205 (when the module is running)	Hydraulic Principles and Flow in Pipes	ACAD YR	20 credits
CIV109	Mathematics and Python Programming	ACAD YR	20 credits

A student must take FCE1001 Faculty Global Engineering Challenge Week as a core module. A student will be expected to pass the module in order to progress to Level 3. A student must pass the module in order to graduate.

Year 2

Core These are a compulsory part of your degree: you cannot change them. units (120 credits)

A student will take

Semester 1
CIV235	Water and Wastewater	AUT SEM	10 credits
FCE2001 + Yes. Restricted to second year Faculty of Engineering students.	Engineering - You're Hired	AUT SEM	0 credits
MAS252 P⇒Is a pre-requisite for: MAS380 (when the module is running) + This module is compulsory for students in Civil Engineering..	Further Civil Engineering Mathematics and Computing	AUT SEM	10 credits
Semester 2
CIV277	Construction Project Management	SPR SEM	10 credits
MAT2600	Materials for Structural Engineering	SPR SEM	10 credits
Full academic year
CIV2100	Structural Analysis I	ACAD YR	20 credits
CIV2200 P⇒Is a pre-requisite for: CIV413 CIV4175 CIV4201 (when the module is running) XCannot be taken with: CIV2201	Structural Engineering Design and Appraisal	ACAD YR	20 credits
CIV2300 P⇒Is a pre-requisite for: CIV4729 (when the module is running)	Pipes and Open Channel Hydraulics	ACAD YR	20 credits
CIV2500 P⇒Is a pre-requisite for: CIV4501 CIV4505 CIV6505 (when the module is running)	Geotechnical Engineering 2	ACAD YR	20 credits

At the discretion of the examiners, a student must pass units CIV2100, CIV2300, CIV2500 and MAT2600 to proceed to Level 3.

Students must take FCE2001 Engineering You’re Hired as a core module. A student will be expected to pass the module in order to progress to Level 3. A student must pass the module in order to graduate.

Year 3

Core These are a compulsory part of your degree: you cannot change them. units (120 credits)

A student will take

Full academic year
CIV395 + CIVU27, CIVU26, CIVU30 , CIVU31 only..	Year in Industry	ACAD YR	120 credits

A student will take CIV395 Year in Industry before proceeding to Level 4. A student will be responsible for securing a suitable industrial placement in order to take CIV395 Year in Industry. The appropriateness of the placement will be determined by the department’s Year in Industry Tutor. A student who fails to obtain a suitable placement will instead be required to become a student for the Degree of BEng Civil Engineering (CIVU17).

CIV395 requires that a student will spend a minimum of 38 weeks working in an industrial establishment, the arrangements being subject to the approval of the department’s Year in Industry Tutor. A student who fails to satisfy these requirements may be permitted by the Faculty to become instead a student for the Degree of BEng Civil Engineering (CIVU17).

Year 4

Core These are a compulsory part of your degree: you cannot change them. units (100 credits)

A student will take

Semester 1
CIV312	Advanced Structural Analysis	AUT SEM	10 credits
CIV350	Geotechnical Design	AUT SEM	10 credits
CIV387	Civil Engineering Research Skills	AUT SEM	10 credits
MGT388	Finance and Law for Engineers	AUT SEM	10 credits
Semester 2
CIV3201	Integrated Design Project - Concept Design Stage	SPR SEM	20 credits
CIV3202	Individual Project	SPR SEM	30 credits
CIV3204	Integrated Design Project - International Report and Individual Portfolio	SPR SEM	10 credits

Approved These are on a restricted list of modules offered by your department(s). Normally you will need to select a minimum number of credits from the list. units (20 credits)

A student will take 20 credits from this group.

Semester 1
CIV321 P⇒Is a pre-requisite for: CIV4201 (when the module is running)	Advanced Structural Design and Appraisal	AUT SEM	10 credits
CIV337	Urban Drainage Engineering	AUT SEM	10 credits
MAS380 ⇐PPre-requisites: MAS151 MAS252 + This module is for students in Civil Engineering..	Computational Engineering Mathematics	AUT SEM	10 credits

A student who does not pass CIV3202 (Individual Project) at the first attempt will be ineligible for the award of the Degree with Honours.

A student who has been awarded credit in compensation of failed units in Years 2 and 4 will be permitted an additional resit attempt in the compensated credits. An additional resit attempt can only be granted where the student has met the requirements for progression (or completion) under the General Regulations for First Degrees.

A student who has been awarded credit in compensation of failed units in Years 2 and 4, where the grade achieved is more than 10% below the pass grade in those failed units, may not be recommended for a degree award that is accredited under Engineering Council rules.

A student who has been awarded more than 30 credits in compensation of failed units across Years 1, 2 and 4, may not be recommended for a degree award that is accredited under Engineering Council rules.

Where a student has met the requirements for the award of a degree under the General Regulations for First Degrees but not the requirements for the award of a degree accredited under Engineering Council rules, they may be recommended for the award of BEng Civil Engineering Technology with an Industrial Placement Year.

⇐P	-	This module has pre-requisite(s).
P⇒	-	This module is a pre-requisite for other modules.
C	-	This module has co-requisite(s).
X	-	Some modules cannot be studied in combination with this module.
+	-	Additional information about requirements for studying this module.

Please note that the regulations displayed on this page reflect provision in 2023/24 and may not reflect study undertaken in other academic sessions. To see regulations that applied in another academic session, please return to the Programme Regulations Finder home screen and select the appropriate session.