MENG Chemical Engineering with Biological Engineering with a Year in Industry (CPEU26) IS
|
2023 - 2024
|
For students whose initial registration was in 2019-20 or 2020-21.
|
|
|
|
|
Year 1
|
units (120 credits)
|
1A
|
|
A student will take
|
Semester 1
|
CPE130
|
Principles of Chemical Engineering 1
|
AUT SEM
|
15 credits
|
CPE150
|
Chemical Principles
|
AUT SEM
|
15 credits
|
CPE160
|
Chemical Engineering Thermodynamics
|
AUT SEM
|
15 credits
|
FCE1001
|
Global Engineering Challenge Week
|
AUT SEM
|
0 credits
|
Semester 2
|
CPE140
|
Principles of Chemical Engineering 2
|
SPR SEM
|
15 credits
|
CPE170
|
Fluid and Particle Mechanics
|
SPR SEM
|
15 credits
|
CPE180
|
Heat Transfer
|
SPR SEM
|
15 credits
|
CPE190
|
Engineering with Living Systems 1
|
SPR SEM
|
10 credits
|
Full academic year
|
MAS140
|
Mathematics (Chemical)
|
ACAD YR
|
20 credits
|
Any Semester
|
CPE1999
|
Skills for Employability - Level 1
|
GRAD YR
|
0 credits
|
|
|
1B
|
Students commencing Level 1 of a programme of study from session 2016-17 onwards must take FCE1001 Faculty Global Engineering Challenge Week as a core module. A student will be expected to pass the module in order to progress to Level 3. A student must pass the module in order to graduate.
|
Year 2
|
units (120 credits)
|
2A
|
|
A student will take
|
Semester 1
|
ACS219
|
Process Control
|
AUT SEM
|
15 credits
|
CPE230
|
Mass Transfer and Separation Processes
|
AUT SEM
|
20 credits
|
CPE240
|
Engineering with Living Systems 2
|
AUT SEM
|
15 credits
|
FCE2001
|
Engineering - You're Hired
|
AUT SEM
|
0 credits
|
MAS248
|
Mathematics III (Chemical)
|
AUT SEM
|
10 credits
|
Semester 2
|
CPE250
|
Reaction Engineering 1
|
SPR SEM
|
15 credits
|
CPE260
|
Experimental Investigation
|
SPR SEM
|
15 credits
|
CPE270
|
Process and Product Design
|
SPR SEM
|
15 credits
|
CPE280
|
Introduction to Pharmaceutical Engineering
|
SPR SEM
|
15 credits
|
Any Semester
|
CPE2999
|
Skills for Employability - Level 2
|
GRAD YR
|
0 credits
|
|
|
2B
|
Students commencing Level 2 of a programme of study from session 2016-17 onwards must take FCE2001 Engineering – You’re Hired as a core module. A student will be expected to pass the module in order to progress to Level 3. A student must pass the module in order to graduate.
|
Year 3
units (120 credits)
|
3A
|
|
A student will take
|
Semester 1
|
CPE330
|
Systems for Sustainability
|
AUT SEM
|
15 credits
|
CPE340
|
Science of Formulated Products
|
AUT SEM
|
15 credits
|
CPE350
|
Transport Phenomena
|
AUT SEM
|
15 credits
|
CPE3999
|
Skills for Employability - Level 3
|
AUT SEM
|
0 credits
|
Semester 2
|
CPE336
|
Biopharmaceutical Manufacturing
|
SPR SEM
|
15 credits
|
CPE360
|
Reaction Engineering 2
|
SPR SEM
|
15 credits
|
Full academic year
|
CPE31003
|
Process Design Project
|
ACAD YR
|
45 credits
|
|
|
3B
|
A student who does not pass CPE31003 (Process Design Project) at the first attempt will be ineligible for the award of the Degree with Honours.
|
Year 4
units (120 credits)
|
4A
|
|
A student will take
|
Full academic year
|
CPE320
|
Year in Industry
|
ACAD YR
|
120 credits
|
|
|
4B
|
A student will be responsible for securing a suitable industrial placement in order to take CPE320 Year in Industry. The appropriateness of the placement will be determined by the Departmental Director of Education. A student who fails to obtain a suitable placement will instead be required to become a student for the Degree of MEng in Chemical Engineering with Biological Engineering (CPEU16). A student will take CPE320 Year in Industry before proceeding to Level 5.
|
4C
|
A student will normally spend the Year in Industry between the third and fourth year of the degree programme. However, with the permission of the Head of Department, the student may spend the Year in Industry between the second and third year of the degree programme.
|
4D
|
CPE320 requires that a student will spend a minimum of 38 weeks working in an industrial establishment, the arrangements being subject to the approval of the Departmental Director of Education. The Year in Industry will be assessed on a written report and a post-placement presentation. No grades will be awarded for the Year in Industry which will be assessed on a pass/fail basis. A student who fails to satisfy these requirements may be permitted by the Faculty to become instead a student for the Degree of MEng in Chemical Engineering with Biological Engineering (CPEU16).
|
Year 5
units (120 credits)
|
5A
|
|
A student will take
|
Semester 1
|
CPE450
|
Advanced Process Modelling, Simulation and Optimisation
|
AUT SEM
|
15 credits
|
CPE460
|
Computational Modelling
|
AUT SEM
|
15 credits
|
CPE61016
|
Bioresources and Bioprocessing
|
AUT SEM
|
15 credits
|
Semester 2
|
CPE442
|
Biopharmaceutical Engineering
|
SPR SEM
|
15 credits
|
CPE443
|
Synthetic Biology
|
SPR SEM
|
15 credits
|
Full academic year
|
CPE440
|
Research Project
|
ACAD YR
|
45 credits
|
|
|
5B
|
A student must pass CPE440 (Research Project) at the first attempt in order to be eligible for the award of the Degree of MEng in Chemical Engineering with Biological Engineering with a Year in Industry (CPEU26). A student who fails to satisfy this requirement may be awarded the degree of BEng in Chemical Engineering (CPEU02) or the degree of BEng in Chemical Engineering with Industrial Experience (CPEU29).
|
6
|
A student must satisfy the requirements of the General Regulations for First Degrees as to progression in order to continue as a student for the Degree of MEng in Chemical Engineering with Biological Engineering with a Year in Industry (CPEU26). A student who fails to satisfy these requirements may be permitted by the Faculty to become instead a student for the Degree of BEng in Chemical Engineering (CPEU02).
|
7
|
A student must satisfy the requirements of the General Regulations for First Degrees as to the minimum number of credits at FHEQ Level 7 (not fewer than 90 credits at Levels 3 and 4) in order to be eligible for the award of Degree of MEng in Chemical Engineering with Biological Engineering with a Year in Industry (CPEU26). A student who fails to satisfy this requirement may be awarded the degree of BEng in Chemical Engineering (CPEU02) or the degree of BEng in Chemical Engineering with Industrial Experience (CPEU29).
|
|
|
|
|
|
-
|
This module has pre-requisite(s).
|
|
-
|
This module is a pre-requisite for other modules.
|
|
-
|
This module has co-requisite(s).
|
|
-
|
Some modules cannot be studied in combination with this module.
|
|
-
|
Additional information about requirements for studying this module.
|
|
|
Please note that the regulations displayed on this page reflect provision in 2023/24 and may not reflect study undertaken in other academic sessions. To see regulations that applied in another academic session, please return to the Programme Regulations Finder home screen and select the appropriate session.
|
|
|
|