MENG Engineering (Energy and Sustainability) (GEEU04) FT

2021 - 2022

For students whose initial registration was PRIOR to the 2020-2021 session

Year 3

Core These are a compulsory part of your degree: you cannot change them. units (80 credits)

A student will take

Semester 1
CPE332	Introduction to Fuels and Energy	AUT SEM	10 credits
MAT3910 CCo-requisites: MAT3920 XCannot be taken with: MAT4910	Nuclear Science, Engineering and Technology	AUT SEM	10 credits
MEC303 + Restricted to students registered for a Programme of Study within the Faculty of Engineering.	Advanced Engineering Thermodynamic Cycles	AUT SEM	10 credits
MGT388	Finance and Law for Engineers	AUT SEM	10 credits
Semester 2
MEC316 P⇒Is a pre-requisite for: MEC425 (when the module is running) + Only vailable to students in the Faculty of Engineering.	Renewable Energy	SPR SEM	10 credits
Full academic year
GEE301	Interdisciplinary Group Design Project	ACAD YR	30 credits

Approved These are on a restricted list of modules offered by your department(s). Normally you will need to select a minimum number of credits from the list. units (40 credits)

A student will take 40 credits from this group.

Semester 1
CIV337	Urban Drainage Engineering	AUT SEM	10 credits
CPE330	Systems for Sustainability	AUT SEM	15 credits
MEC304 + Restricted to students registered for a programme of study within the Faculty of Engineering.	Manufacturing Systems	AUT SEM	10 credits
Semester 2
CIV201	Sustainable Buildings	SPR SEM	10 credits
CPE333	Environmental Engineering	SPR SEM	15 credits
MEC313 P⇒Is a pre-requisite for: MEC457 MEC457 MEC6440 (when the module is running) + Restricted to students registered for a programme of study within the Faculty of Engineering.	Finite Element Techniques	SPR SEM	10 credits
MEC320 P⇒Is a pre-requisite for: MEC458 MEC467 (when the module is running) + Only availabe to students registered for a Programme of Study within Mechanical Engineering or IPO.	Computational Fluid Dynamics	SPR SEM	10 credits
Full academic year
EEE338 XCannot be taken with: EEE301 EEE301 EEE341	Power Engineering	ACAD YR	20 credits

Year 4

Core These are a compulsory part of your degree: you cannot change them. units (45 credits)

A student will take

Full academic year
GEE401 + Yes, only available to students studying GEEU01 and GEEU02..	Individual Advanced Project	ACAD YR	45 credits

Approved These are on a restricted list of modules offered by your department(s). Normally you will need to select a minimum number of credits from the list. units (75 credits)

A student will take 75 credits from this group.

Semester 1
CIV4025	Thermodynamics for Buildings and Cities	AUT SEM	10 credits
CIV4704 P⇒Is a pre-requisite for: CIV4744 (when the module is running) XCannot be taken with: CIV6704	Groundwater Engineering	AUT SEM	10 credits
CPE450	Advanced Process Modelling, Simulation and Optimisation	AUT SEM	15 credits
CPE61016	Bioresources and Bioprocessing	AUT SEM	15 credits
MEC446 + Restricted to Level 7 or above students registered on a programme in the Faculty of Engineering..	Fundamentals and Applications of Tribology	AUT SEM	15 credits
Semester 2
CIV4782	Sustainable Water Resources Systems	SPR SEM	15 credits
CIV4915 + CIV6012 OR ARC6843. Only available to students registered on CIVU21 and CIVU31..	Urban Microclimate	SPR SEM	15 credits
CPE449	Nuclear Reactor Engineering	SPR SEM	15 credits
CPE451	Low Carbon Energy Science and Technology	SPR SEM	15 credits
MAT4900 XCannot be taken with: MAT6900	Advanced Nuclear Systems	SPR SEM	10 credits
MEC441 + Restricted to Level 7 students registered on associated programmes..	Sustainable Engineering Design	SPR SEM	15 credits
MEC447 + Restricted to Level 7 or above students registered on a programme in the Faculty of Engineering..	Automotive Powertrain	SPR SEM	15 credits
MEC450 + Restricted to Level 7 or above students registered on a programme in the Faculty of Engineering..	Advanced Energy and Power	SPR SEM	15 credits
MEC61042 + Only available to students registered for a Programme of Study within the Faculty of Engineering.	Nuclear Thermal Hydraulics	SPR SEM	15 credits
Full academic year
EEE6202	Energy Storage Management	ACAD YR	15 credits

A student must pass the Individual Advanced Project (GEE401) at the first attempt in order to be eligible for the award of the Degree of MEng Engineering (Energy and Sustainability) (GEEU04). A student who fails to satisfy this requirement may be permitted by the Faculty to be awarded the Degree of BEng Engineering (Energy and Sustainability) (GEEU26).

A student must pass a minimum of 100 credits at Level 4 in order to be awarded the degree of Degree of MEng Engineering (Energy and Sustainability) (GEEU04) with accreditation.

A student must satisfy the requirements of the General Regulations for First Degrees as to progression in order to continue as a student for the Degree of MEng Engineering (Energy and Sustainability) (GEEU04). A student who fails to satisfy these requirements may be permitted by the Faculty to (a) at the end of Level 2 become a candidate for the Degree of BEng Engineering (Energy and Sustainability) (GEEU26), or (b) at the end of Level 3 become a candidate for the unaccredited Degree of BEng Engineering Technology (GEEU46). A student who fails the Individual Advanced Project at Level 4 or who chooses to withdraw from the University at the end of Level 3 may be awarded the unaccredited Degree of BEng Engineering Technology (GEEU46).

⇐P	-	This module has pre-requisite(s).
P⇒	-	This module is a pre-requisite for other modules.
C	-	This module has co-requisite(s).
X	-	Some modules cannot be studied in combination with this module.
+	-	Additional information about requirements for studying this module.

Please note that the regulations displayed on this page reflect provision in 2021/22 and may not reflect study undertaken in other academic sessions. To see regulations that applied in another academic session, please return to the Programme Regulations Finder home screen and select the appropriate session.