BENG Materials Science and Engineering (Industrial Management) with a Year in Industry (MATU43) IS

2017 - 2018

Year 1

Core These are a compulsory part of your degree: you cannot change them. units (120 credits)

A student will take

Semester 1
ECN101 XCannot be taken with: ECN107 + Restricted to students on the degree programmes COMU27, COMU47, EASU06, EASU11, MATU16, MATU27, MGTU11, MGTU12, MGTU13, MGTU19, MGTU31, FREU05, GERU05, HSSU05 and RUSU04.	Business Economics	AUT SEM	10 credits
FCE1001	Global Engineering Challenge Week	AUT SEM	0 credits
MAT1411	Biomaterials I	AUT SEM	10 credits
MAT1633 CCo-requisites: MAT1820	Kinetics, Thermodynamics and Phase Diagrams	AUT SEM	10 credits
Semester 2
MAT1220 P⇒Is a pre-requisite for: MAT2220 MAT3821 (when the module is running) XCannot be taken with: GEE206	Introduction to Materials Properties	SPR SEM	10 credits
MGT120 P⇒Is a pre-requisite for: MGT219 MGT252 MGT309 (when the module is running)	Introduction to Behaviour at Work	SPR SEM	10 credits
Full academic year
MAS153 P⇒Is a pre-requisite for: MAT1620 (when the module is running) CCo-requisites: MAT1640 MAT1642 + Unrestricted - subject to availability. This module is for students in the Materials Department..	Mathematics (Materials)	ACAD YR	20 credits
MAT1610	Introduction to Materials Chemistry	ACAD YR	20 credits
MAT1643 XCannot be taken with: AER11004 BIE2643	Introduction to Mechanical Properties and Structural Materials	ACAD YR	20 credits
MAT1820 CCo-requisites: MAT1633 + Can only be taken by Level 1 UG students on MATU programmes..	Digital Skills for Materials	ACAD YR	10 credits

Students commencing Level 1 of a programme of study from session 2016-17 onwards must take FCE1001 Faculty Global Engineering Challenge Week as a core module. A student will be expected to pass the module in order to progress to Level 3. A student must pass the module in order to graduate.

Year 2

Core These are a compulsory part of your degree: you cannot change them. units (120 credits)

A student will take

Semester 1
FCE2001 + Yes. Restricted to second year Faculty of Engineering students.	Engineering - You're Hired	AUT SEM	0 credits
MAS250 + This module is compulsory for students in Materials..	Mathematics II (Materials)	AUT SEM	10 credits
MAT2110 P⇒Is a pre-requisite for: MAT2320 MAT3810 (when the module is running) XCannot be taken with: MAT374	Structure of Solid Materials	AUT SEM	10 credits
MAT2220 XCannot be taken with: MAT377	Functional Materials	AUT SEM	10 credits
MAT2310 XCannot be taken with: MAT375	Industrial Materials Processing	AUT SEM	20 credits
MGT219 ⇐P⇒Pre-requisites: MGT120 Is a pre-requisite for: MGT3000 MGT364 MGT364 MGT380 (when the module is running)	Organisational Behaviour	AUT SEM	20 credits
Semester 2
MAT2210 CCo-requisites: MAT2320 XCannot be taken with: MAT376	Deformation and Failure of Materials	SPR SEM	10 credits
MAT2320 P⇒Is a pre-requisite for: MAT3810 (when the module is running)	Microstructure and Thermodynamics of Materials	SPR SEM	20 credits
MAT2350 XCannot be taken with: AER2350 GEE206	Materials Selection and Fracture Mechanics	SPR SEM	10 credits
MAT2840	Heat Transfer and Diffusion	SPR SEM	10 credits

Students commencing Level 2 of a programme of study from session 2012-13 onwards must take FCE2001 Interdisciplinary Project Week/Achieve More Project as a core module. A student will be expected to pass the module in order to progress to Level 3. A student must pass the module in order to graduate.

Year 3

Core These are a compulsory part of your degree: you cannot change them. units (120 credits)

A student will take

Full academic year
MAT395	Year in Industry	ACAD YR	120 credits

A student must achieve a weighted mean grade of 55 or above at Level 1 and Level 2 in order to proceed to the Year in Industry, progression being at the discretion of the Head of Department. A student who fails to progress may be permitted to become instead a candidate for the Degree of BEng Materials Science & Engineering (Industrial Management) (MATU27).

A student will be responsible for securing a suitable industrial placement in order to take MAT395 Year in Industry. The appropriateness of the placement will be determined by the Head of Department. A student who fails to obtain a placement will instead be required to become a student for the Degree of BEng Materials Science & Engineering (Industrial Management) (MATU27).

MAT395 requires that a student will spend a minimum of 38 weeks working in an industrial establishment, the arrangements being subject to the approval of the Head of Department. A student who fails to satisfy these requirements may be permitted by the Faculty to become instead a student for the Degree of BEng Materials Science & Engineering (Industrial Management) (MATU27).

Year 4

Core These are a compulsory part of your degree: you cannot change them. units (90 credits)

A student will take

Semester 1
MAT373	Surface Degradation and Protection	AUT SEM	10 credits
MEC304 + Restricted to students registered for a programme of study within the Faculty of Engineering.	Manufacturing Systems	AUT SEM	10 credits
MGT388	Finance and Law for Engineers	AUT SEM	10 credits
Semester 2
MAT339 + None.	Failures and Case Study	SPR SEM	10 credits
MEC314	Design Innovation Toolbox	SPR SEM	10 credits
Full academic year
MAT356 XCannot be taken with: MAT4356 MAT4357 MAT4581 MAT61018	Literature Survey and Project	ACAD YR	30 credits
MAT3821 XCannot be taken with: MAT4821 + At least one A level of Mathematics or Physics. None. Cannot be taken with MAT4821..	Introduction to Materials Modelling	ACAD YR	10 credits

Approved These are on a restricted list of modules offered by your department(s). Normally you will need to select a minimum number of credits from the list. units (30 credits)

A student will take 30 credits from this group.

Semester 1
MAT306 XCannot be taken with: MAT6430 MAT6461 MAT6462 + Cannot be taken with MAT6430, MAT6461 or MAT6462.	Composite Micromechanics and Strong Reinforcing Fibres	AUT SEM	10 credits
MAT333 XCannot be taken with: AER330 MAT3332 MAT3333 MAT414 MAT630 MAT630 MAT6331 MAT6331 MAT6361 MAT6362 MAT6373	Metals	AUT SEM	10 credits
MAT3430 XCannot be taken with: MAT6309	Materials for Biological Applications	AUT SEM	10 credits
MAT3910 CCo-requisites: MAT3920 XCannot be taken with: MAT4910	Nuclear Science, Engineering and Technology	AUT SEM	10 credits
Semester 2
MAT3210	Advanced Functional Materials	SPR SEM	10 credits
MAT3442 XCannot be taken with: MAT4442 + Cannot be taken with MAT4442..	Glasses	SPR SEM	10 credits
MAT3444	Advanced Materials Manufacturing: Part I	SPR SEM	10 credits

A student must pass MAT356 (Literature Survey and Project) at the first attempt in order to be eligible for the award of the Degree of BEng Materials Science & Engineering (Industrial Management) with a Year in Industry. A student who fails to satisfy this requirement may be awarded the Degree of BEng Materials Science & Engineering (Industrial Management) (MATU27) but will be ineligible for the award of the Degree with Honours.

⇐P	-	This module has pre-requisite(s).
P⇒	-	This module is a pre-requisite for other modules.
C	-	This module has co-requisite(s).
X	-	Some modules cannot be studied in combination with this module.
+	-	Additional information about requirements for studying this module.

Please note that the regulations displayed on this page reflect provision in 2017/18 and may not reflect study undertaken in other academic sessions. To see regulations that applied in another academic session, please return to the Programme Regulations Finder home screen and select the appropriate session.