Robotic implant encourages cell growth in oesophagus tissue
- Study finds that a robotic implant encourages cell growth in oesophagus tissue.
- Potential for new robotic technology to aid with adaptive treatment of patients with oesopageal atresia.
- Research helps doctors to understand how to stimulate tissue growth without causing damage to the cells or cause scar tissue.
Researchers at the University of Sheffield and Boston’s Children Hospital have created a revolutionary prototype robotic implant to help tissue growth in babies.
Dr Dana Damian from the Department of Automatic Control and Systems Engineering at the University of Sheffield and her team from Boston Children’s Hospital, Harvard Medical School, have created a small robot that can be implanted into the body to aid with the treatment of oesophageal atresia in children.
The robot is attached to the oesophagus by two rings. An incorporated motor then stimulates the cells by gently pulling the tissue. Using two types of sensors - one to measure the tension in the tissue and another to measure tissue displacement - the robot monitors and applies tissue traction depending on the tissue properties.
The robot’s function is inspired by the Foker technique of correcting the oesophageal atresia which involves the tissue being manually pulled slowly using sutures over a period of time.
Dr Dana Damian said: “Doctors have been performing this surgical procedure as they realised that tissue lengthening can be achieved by pulling on the tissue. However, it is unknown how much force should be applied to produce tissue lengthening. Although the technique is one of the best standards, sometimes the sutures surgeons attach to the oesophagus can tear which can result in repetitive surgeries or scar tissue can form that can cause problems for the patient in the future.
“The robot we developed addresses this issue because it measures the force being applied and can be adapted at anytime throughout the treatment. With it being implanted in the patient, it means they have - in effect - a doctor by their side all the time, monitoring them and changing their treatment when needed.”
Oesophageal atresia is a rare genetic disease which affects about 1 in 4000 babies born in the US and Europe. It occurs when the upper and lower parts of the oesophagus don’t connect, which means food can't reach the stomach. Some of these cases are characterized by a gap between 3 and 10 cm between the esophageal stubs, called Long gap oesophageal atresia. The treatment of these cases using Foker technique can start as early as 3 months old and can take months.
Usually, the patient is sedated during the treatment to ensure the sutures in place do not tear.
The study suggests that with this robot, when used on patients, babies would be free to move around and be allowed to interact with their parents while undergoing treatment, taking away some of the stress from both parties.
The implant is powered by a control unit which remains outside of the body, attached to a vest. This means that doctors can monitor the patient without impacting on the baby’s routine.
Dr Damian said: “The biggest challenge we faced was to design a robot that works in a technology-hostile environment, and to develop a robust physiologically-relevant interaction with the tissue that promotes its growth when there are so many unknowns about the underlying mechanisms. The robot we designed had to be soft and durable, air and water impermeable, abrasion resistant, non-corrosive and be able to be implanted for long term treatment.
“This is the first step in adaptive regenerative-based treatments of tissues. We have made a device that can provide long-term control of the tissue growth using on-board medical expertise. We further want to look at other tubular tissues, such as the intestine and the vascular system, to see if this sort of technology can be used to help with other conditions, such as Short Bowel Syndrome.”
Tissue growth has been an issue in the Bioengineering field for many years, however this research is a stepping stone to understanding how mechanical stimulation at the tissue level helps the cells multiply and how doctors can stimulate cells to grow using intuitive tools.
The research has shown cells will multiply in response to being pulled rather than stretching out of shape or scarring. Using the robot’s monitoring and control abilities, the treatment can be changed to suit the patient and to optimize the cells’ growth.
Professor Sheila MacNeil, Professor of Tissue Engineering in the Department of Materials Science and Engineering, said: “Increasing knowledge of how tissues respond to mechanical strain with the production of new tissue has been needed for a long while. Doctors and researchers understand that tissues will normally grow in response to traction forces, for example this occurs naturally during pregnancy as the growing baby increases the pressure inside the mother, the abdominal wall and skin increase in area to relieve the tension generated from stretching these tissues. Plastic-surgeons have copied this trick by placing an inflatable balloon under the skin and inflating it over a period of weeks to expand skin and they then use this “extra skin” for reconstructive surgery for the patient.
"The development of this robotic implant is a breakthrough in applying the knowledge that tissues respond to strain with the production of new tissue in a practical and clinically useful manner.”
About the paper
In vivo tissue regeneration with robotic implants
Contributors: Dana D. Damian* (ACSE), Karl Price*, Slava Arabagi, Ignacio Berra, Zurab Machaidze, Sunil Manjila, Shogo Shimada, Assunta Fabozzo, Gustavo Arnal, David Van Story, Jeffrey D. Goldsmith, Agoston T. Agoston, Chunwoo Kim, Russell Jennings,
Peter D. Ngo, Michael Manfredi, Pierre E. Dupont.
* Contributed equally
Vol. 3, Issue 14, eaaq001
The Department of Automatic Control and Systems Engineering (ACSE) was ranked first in terms of quality of its research publications in the 2014 REF with 98.5% of our publications were assessed as either world leading or internationally excellent in terms of their originality, significance and rigour. We were ranked third in the country for overall research quality.
In 2018, ACSE will be celebrating 50 years of teaching, learning and research. Founded in 1968 by Professor Harry Nicholson, the department has spent the last five decades driving innovation in Control and Systems Engineering. Our staff and students work in almost every industry, from the Life Sciences to aerospace, from manufacturing and robotics to energy grid networks.