22 September 2020

Engineers link brains to computers using 3D printed implants

A team of engineers, led by ACSE's Professor Ivan Minev and Professor Pavel Musienko (St Petersburg State University), have developed a prototype neural implant that could be used to develop treatments for problems in the nervous system.

3D printed neuro implant
  • ACSE's Professor Ivan Minev is part of a team of engineers who have developed 3D printed implants that can be used to link brains to computers
  • Neural interfaces could lead to the next generation of medical treatments for patients with nervous system problems - but innovation in the technology is challenged by the high cost and lengthy time it takes to develop prototype implants
  • Prototype implants can be made cheaper and much more quickly using 3D printing technology to drive forward research and innovation in neural interfaces
  • System could one day enable neurosurgeons to 3D print an implant in the operating theatre while their patient is being prepped for surgery

Linking the human brain to a computer is usually only seen in science fiction, but now an international team of engineers and neuroscientists at the University of Sheffield (UK), St Petersburg State University (Russia) and Technische Universität Dresden (Germany) have harnessed the power of 3D printing to bring the technology one step closer to reality.

In a new study published in 'Nature Biomedical Engineering', the team, led by ACSE's Professor Ivan Minev and Professor Pavel Musienko (St Petersburg State University), have developed a prototype neural implant that could be used to develop treatments for problems in the nervous system.

The neural implant has been used to stimulate the spinal cord of animal models with spinal cord injuries and now could be used to develop new treatments for human patients with paralysis. The proof of concept technology has been shown in the study to also fit well on the surface of a brain, spinal cord, peripheral nerves and muscles, hence opening possibilities in other neurological conditions.

Linking the human brain to a computer via a neural interface is an ambition for many researchers throughout the worlds of science, technology and medicine, with recent stories in the media highlighting efforts to develop the technology. However, innovation in the field is hampered by the huge costs and long development time it takes to produce prototypes - which are needed for exploring new treatments.

The technology promises great potential to bring new medical treatments for injuries to the nervous system based on a fusion of biology and electronics. The vision relies on implants that can sense and supply tiny electrical impulses in the brain and the nervous system.

A close up shot of a neural implant on a surface

The team has shown how 3D printing can be used to make prototype implants much quicker and in a more cost effective way in order to speed up research and development in the area. The implants can be easily adapted to target specific areas or problems within the nervous system.

Using the new technique, a neuroscientist can order a design which the engineering team can transform into a computer model which feeds instructions to the printer. The printer then applies a palette of biocompatible, mechanically soft materials to realise the design. The implant can be quickly amended if changes are required, giving neuroscientists a quicker and cheaper way to test their ideas for potential treatments.

The research we have started at TU Dresden and continuing here at Sheffield has demonstrated how 3D printing can be harnessed to produce prototype implants at a speed and cost that hasn’t been done before, all whilst maintaining the standards needed to develop a useful device. The power of 3D printing means the prototype implants can be quickly changed and reproduced again as needed to help drive forward research and innovation in neural interfaces.

Prof Ivan Minev

Professor of Intelligent Healthcare Technologies at the University of Sheffield’s Department of Automatic Control and Systems Engineering

The researchers have shown that 3D printers can produce implants that can communicate with brains and nerves. Following this early work, the team aims to demonstrate how the devices are robust when implanted for long periods of time.

The team’s ambition, however, is to go to the clinic and open up the possibilities of personalised medicine to neurosurgeons.

Patients have different anatomies and the implant has to be adapted to this and their particular clinical need. Maybe in the future the implant will be printed directly in the operating theatre while the patient is being prepared for surgery.

Professor Minev

Professor of Intelligent Healthcare Technologies at the University of Sheffield’s Department of Automatic Control and Systems Engineering

For more information on the study and to access the full paper, visit: https://www.nature.com/articles/s41551-020-00615-7

Undergraduate scholarships

Our department offers financial assistance in the form of scholarships and bursaries, in addition to the scholarships offered by the University of Sheffield.

A world-class university – a unique student experience

Sheffield is a research university with a global reputation for excellence. We're a member of the Russell Group: one of the 24 leading UK universities for research and teaching.