
Aerospace Engineering with a Year in North America MEng
Aerospace Engineering
Explore this course:
This course is no longer taking applications for 2023-24 entry. Find another undergraduate course.
Key details
- A Levels AAA
Other entry requirements - UCAS code H406
- 4 years / Full-time
- September start
- Accredited
- Find out the course fee
- Study abroad
Course description
This course is the same as our MEng Aerospace Engineering, but you'll spend your third year studying aerospace engineering at a leading university in the USA or Canada. You'll benefit from the opportunity to live abroad and make international contacts.
Our modules cover aero propulsion, aerodynamic design, aircraft dynamics and control, computational aerodynamics and project management. Your study includes some experience of flight instrumentation and an individual investigative project of your choice.
All our students also take the Global Engineering Challenge, where teams of students work to solve engineering problems in developing countries. This is designed to develop you as a professional engineer and enhance your career prospects.
This MEng provides all the academic requirements needed for Chartered Engineer (CEng) status.
This MEng satisfies all the academic requirements needed for Chartered Engineer (CEng) status. Our courses are accredited by the Royal Aeronautical Society, the Institution of Mechanical Engineers, the Institution of Engineering and Technology and the Institute of Materials, Minerals and Mining.
Modules
A selection of modules are available each year - some examples are below. There may be changes before you start your course. From May of the year of entry, formal programme regulations will be available in our Programme Regulations Finder.
Choose a year to see modules for a level of study:
UCAS code: H406
Years: 2022, 2023
Core modules:
- Aerospace Engineering Design, Build and Test
-
This module will introduce students to the basic concepts of aircraft and spacecraft design with a focus on systems engineering, interdisciplinary design and performance. Students will learn about the basic principles of flight and how performance can be calculated during a typical flight/mission including take-off, landing, climb, cruise and turning and orbital mechanics.The basic principles of systems engineering as an approach to aircraft design will be taught and the importance of considering aircraft design as an interdisciplinary design problem are covered and illustrated through the design, build and test activity. Students will undertake an exercise to design, build and test an aircraft, covering choices of materials, structures, aerodynamics, propulsion, avionics and control. Predictions of the aircraft performance will be undertaken in order to model the flight time or a similar parameter, being tested against the actual performance of the aircraft. They will also undertake a range of workshop practice elements in order to learn to operate and utilise appropriate building techniques for the aircraft, satisfying the requirements of “Workshop Practice” as required for accreditation. Students will be introduced to computer coding as an engineering tool, taught the basics of engineering drawing and computer aided design (CAD) and develop an appreciation of basic workshop tools (engineering applications).
20 credits - Introduction to Aerospace Materials
-
This module examines how the macroscopic properties of materials are determined by the arrangement of, and bonding between atoms. How processing can affect these atomic arrangements and thus the microstructure and properties of a material is considered. Finally materials selection for aerospace applications taking into account multiple criteria is introduced.
20 credits - Mathematics (Electrical and Aerospace)
-
This module aims to reinforce students' previous knowledge and to develop new basic mathematical techniques needed to support the engineering subjects taken at Levels 1 and 2. It also provides a foundation for the Level 2 mathematics courses in the appropriate engineering department. The module is delivered via online lectures, reinforced with weekly interactive problem classes..
20 credits - Aerospace Aerodynamics and Thermodynamics
-
This course provides an overview of the fundamental principles of the behaviour of liquids and gases that are essential to an aerospace engineer. Students will encounter the physical basis of important properties, their evaluation and application to practical examples. The course then teaches the interrelationship between pressure, flow and temperature and how this affects the design, performance and energy terms of aerospace engineering components and systems. Irreversibility, both from the point of friction and entropy change will be examined both qualitatively and quantitatively.
15 credits - Aerospace Electrics and Drives
-
This module introduces the concepts and analytical tools for predicting the behaviour of electric components and combinations of electric components. Electromechanical energy conversion such as drives, servo systems and actuator technologies are also introduced.
15 credits
This module will equip students with the ability to create models that describe the circuit components or groups of components to allow predictions of performance to be made for Aerospace Engineering applications.
- Engineering Statics and Dynamics
-
The course provides the fundamental concepts and techniques used in Engineering Statics and Dynamics. Two-dimensional statics are covered including force and moment systems, free body diagrams, equilibrium, friction, and the application to typical structures encountered in aerospace engineering applications (such as beams, frames and trusses). Two-dimensional kinematics and kinetics of particles and rigid bodies are covered. An introduction to the use of the Work-Energy methods in dynamics is given. No prior knowledge of statics or dynamics is assumed; the treatment concentrates on physical understanding and applications in aerospace engineering, rather than using advanced mathematical treatments
15 credits - Introduction to Systems Analysis and Control
-
This module will introduce principles of modelling of simple continuous dynamical systems. This module also introduces analysis of linear models. It includes a detailed analysis of the dynamical behaviour of 1st and 2nd order systems linking behaviour to physical parameters, e.g. Rise time, settling time, overshoot, steady-state. Damping and damping ratio and resonance. Frequency response is also discussed. We will introduce control and feedback as a topic by providing examples of open-loop and closedloop control, and undertake detailed analysis of linear models with a focus on 1st and 2nd order systems. Students are introduced to simple practical feedback mechanisms, including PID controllers and performance criteria such as offset, stability, poles and zeros. You will learn about the principles of how to use Laplace Transforms to solve linear differential equations, and for system representation, using transfer functions and block diagram algebra. You will also develop an appreciation of frequency-domain implications of system analysis through the use of Fourier series. MATLAB is used to reinforce the simulation and analysis of all module contents and coursework assignments.
15 credits - Global Engineering Challenge Week
-
The Faculty-wide Global Engineering Challenge Week is a compulsory part of the first-year programme. The project has been designed to develop student academic, transferable and employability skills as well as widen their horizons as global citizens. Working in multi-disciplinary groups of 5-6, for a full week, all students in the Faculty choose from a number of projects arranged under a range of themes including Water, Waste Management, Energy and Digital with scenarios set in an overseas location facing economic challenge. Some projects are based on the Engineers Without Borders Engineering for people design challenge*.
*The EWB challenge provides students with the opportunity to learn about design, teamwork and communication through real, inspiring, sustainable and cross-cultural development projects identified by EWB with its community-based partner organisations.
Core modules:
- Control Systems Design and Analysis
-
This module gives a solid theoretical foundation for understanding feedback control system analysis, design and application and is suitable for general engineering students. This is supported by hardware laboratories, PC laboratory activities and coursework. Content covers standard analysis tools such as root-loci, Bode diagrams, Nyquist diagrams and z-transforms. The latter part of the course focuses on the design of common feedback strategies using these analysis tools and students will undertake indicative designs and reinforce learning through application to laboratory and hardware systems.
20 credits - Aerospace Fluids Engineering
-
The module is designed to consolidate and extend the students' understanding of basic fluid flow properties, fluid flows, and applying analysis techniques to solve engineering fluids problems. The module will cover the use of both integral control volume and differential analysis techniques. These will be applied to a range of simple engineering fluid systems, Newtonian laminar analysis will be applied to internal flows. The boundary layer will be introduced and related to the concepts of drag and heat transfer. The concepts of compressible nozzle flow, choking and shock waves will be covered. Sub-sonic and sonic compressible flow will be introduced. The students will also be introduced to computational fluid dynamics using FLUENT and given hands-on experience.
10 credits - Aerostructures
-
The overall aim of the course is to explain clearly some fundamental theories of solid mechanics for the modelling of basic aircraft structure problems. In specific terms this means truss system analysis, bending of statically determinate and indeterminate beams, analysis of cross-sections, axes of symmetry, section properties for structural beams, beams loaded by moments and by UDLs, Macaulay's method for beams under point loads and moments, general stress, strain, and displacements in open and closed section thin-walled beams, shear flow and shear centre, torsion of closed and open section beams, torsion of beams, aircraft structural materials, and aircraft structural components.
10 credits - Introduction to Electronic Circuits
-
This module introduces the concepts and analytical tools for predicting the behaviour of combinations of passive circuit elements in conjunction with active electronic components; diodes, transistors and operational amplifiers and the circuits in which these devices are used.
10 credits - Mathematics for Aerospace Engineers
-
This module consolidates previous mathematical knowledge and develops new mathematical techniques relevant to the Aerospace Engineering discipline.
10 credits - Engineering - You're Hired
-
The Faculty-wide Engineering - You're Hired Week is a compulsory part of the second year programme, and the week has been designed to develop student academic, transferable and employability skills. Working in multi-disciplinary groups of about six, students will work in interdisciplinary teams on a real world problem over an intensive week-long project. The projects are based on problems provided by industrial partners, and students will come up with ideas to solve them and proposals for a project to develop these ideas further.
Optional modules:
- Electrical Energy Management and Conversion
-
An outline of the electrical supply infrastructure, including the plurality of electrical energy generation modalities currently in use, is followed by elementary ideas behind protection, safety and tariff structures. The characteristics of electrical machines are discussed together with the circuit strategies that can be used to control of machine performance. Circuits for more general high efficiency power management are also described. Circuits dealing with power will dissipate energy and that energy must be removed if overheating is to be avoided - elements of thermal management are discussed in the context of audio power amplifiers.
20 credits - Introduction to Systems Engineering & Software
-
Engineering applications are typically complex, so students also need to acquire proficiency in analytical problem solving and the ability to apply a systems engineering approach, as a systematic methodology to design and implementation. A group project will develop an understanding of the type of problem solving and systems engineering needed for the design and build of a computer-controlled system. Students will improve skills in communication, team working and reflective practices as a result of the group project. Engineering applications in manufacturing, aerospace, robotics, energy, finance, healthcare and a host of other areas are predominately computer based or computer controlled. In order to be able to create computer based and computer controlled applications, students need to acquire proficiency in relevant software and programming languages. In this module, labs and several individual assignments will build proficiency in creating C programs as solutions to engineering problems.
20 credits - Signals, Systems, and Communications
-
Modern communication systems provide the backbone of the technological development that is driving the information age. The increase of data analytics, machine learning, and networked solutions pushes the trend towards an increasing use of digital communication systems as means of enabling reliable and efficient information exchange. The aim of the unit is to provide the fundamentals of signals, systems and communication systems. The mathematical principles of signal theory and systems theory will be applied within a communication theory context. The unit will provide the students with the tools to analyse and solve complex open-ended communication problems and to evaluate the technological constraints of the proposed solutions.
20 credits - Applied Aerospace Heat Transfer
-
The objective of this module is to teach the student the fundamentals and basic applications of heat transfer. The module is divided into three parts, each focusing on a different heat transfer process, namely conduction, convection and radiation. The three processes are often combined in the problems studied in order to explain heat transfer in a real-life engineering system works. The conduction part of the module focuses on steady heat conduction in one dimensional systems, conduction through fins to increase efficiency and transient heat conduction. Numerical methods applied to conduction problems will also be briefly introduced. Forced convection will be studied in internal flows and in external flows, and natural convection will also be introduced. Heat exchangers will be studied and knowledge of conduction and forced convection will both be used. Thermal radiation will focus on the physics and on network analysis to solve engineering problems. Group work will be very important in the laboratory experiments and for oral presentations on applications of heat exchangers.
10 credits - Design of Structures, Machines and Systems
-
The course brings together analytical, computational and empirical approaches to the design and optimisation of structures and systems. A specific design is used as a thematic project in which the functional analysis and eventual synthesis are brought together. The task is such that no optimal solution is readily available. This enables the student to develop their skill in formulating analytical and computational models and evaluating them so as to develop an optimal design solution.
10 credits - Dynamics of Aerospace Structures and Machines
-
The aim of this module is to develop understanding of the fundamental concepts governing the dynamics of structures and machines for aerospace engineering. It covers two principal areas: structural vibration and rigid body mechanics. In structural vibration, the single degree of freedom model is used to study the free response and forced vibration of systems subjected to steady state, impulse and arbitrary loading. Aspects of rigid body mechanics include the analysis of common two-dimensional mechanisms and the dynamics of rigid rotors, including gyroscopic motion.
10 credits - Introduction to Programming and Problem Solving
-
This module introduces basic concepts of computer programming, through an introduction to problem solving and the development of simple algorithms using the programming language Python. The module will stress the importance of good programming style and good code design and will introduce how an object-oriented approach can help to achieve these aims.
10 credits - Materials Selection and Fracture Mechanics
-
The first half of the course aims to build a comprehensive understanding of the interrelationship between materials selection, materials processing, product design and product performance in order to develop a holistic approach to optimum selection of materials for engineering and industrial applications. Topics examined include methods of materials and process selection through an applied open-ended project.This module also introduces students to fracture mechanics. In the fracture mechanics topics covered in some detail include linear elastic fracture mechanics, cyclic fatigue, stress corrosion and failure prediction. A brief introduction to elastic-plastic fracture mechanics is also included.
10 credits - Selection and Processing of Aerospace Materials
-
This module will consist of two distinct parts. The first part will examine the use of polymers and composite materials within an aerospace context and will focus on structure, property and processing relationships for polymers, reinforcing fibres and both polymer, carbon-carbon, and ceramic matrix composite materials. The second part of the module will provide a broad introduction to the main processing routes for metallic components used in aerospace applications, and will look in detail at techniques such as casting, rolling, forging, as well as the processing routes for metal matrix composites and advanced high strength steels.
10 credits
Core modules:
- Aerospace Engineering Study Abroad Year - Semester 1
-
The module consists of approved courses taken as a full time student at a partner Engineering School abroad. The courses are chosen to firstly, cover the core material of the third year and secondly, to prepare the student for study in the fourth year of the MEng Aerospace Engineering degree programme at the University of Sheffield. The arrangements and courses taken are subject to the approval of the Aerospace Engineering Study Abroad Tutor. The marks obtained in the courses taken abroad will be converted to an equivalent Sheffield University grade, the conversion being approved at a Board of Examiners.
60 credits - Aerospace Engineering Study Abroad Year - Semester 2
-
The module consists of approved courses taken as a full time student at a partner Engineering School abroad. The courses are chosen to firstly, cover the core material of the third year and secondly, to prepare the student for study in the fourth year of the MEng Aerospace Engineering degree programme at the University of Sheffield. The arrangements and courses taken are subject to the approval of the Aerospace Engineering Study Abroad Tutor. The marks obtained in the courses taken abroad will be converted to an equivalent Sheffield University grade, the conversion being approved at a Board of Examiners.
60 credits
Core modules:
- Aerospace Individual Investigative Project
-
The project is designed to develop students' technical knowledge and understanding, technical and personal skills and an appreciation of the wider context of their studies. It gives students the opportunity to apply and develop further their knowledge and skills by applying them to a specific problem area. It is also intended to develop a greater level of student independence. The specific aims of the project are to:
45 credits
- provide students with the freedom to explore possible solutions to real engineering problems, allowing them to demonstrate their understanding of practical aerospace engineering.
- enable students to exercise independent thought and judgement in conducting a technical investigation.
Optional modules:
- Advanced Aerospace Propulsion Technology
-
This module enhances students' foundational knowledge by introducing a more specialist Level 7 understanding of major aero propulsion devices. For example, the rocket design will be mastered from the design lessons and innovations of the rockets of historical importance. The more in depth analysis of the alternative air breathing engines such as ramjet, scramjet, and synergistic air-breathing rocket engine will be investigated. Then the advanced gas turbine off-design performance will be analysed. The advanced gas turbine combustion will also be investigated. Finally, the recent explosive development of electric/hybrid propulsion and aircraft will be examined.
15 credits - Advanced Control
-
The aim of this module is to provide you with an introduction to some of the advanced control techniques used in modern control engineering research and industrial applications. The module will cover both theory and practice, involving analysis and design.
15 credits
Different control techniques and applications may be covered in different years. In all cases, the basic principles and concepts of a particular control technique will be introduced, and comparisons and contrasts will be made with other techniques. Subsequently, the design, analysis and implementation of advanced controllers or control laws will be covered, starting from the requirements of the basic control problem for the application at hand (i.e. stability in the presence of constraints; disturbance and noise rejection). Controller design will be illustrated by industrially-relevant case studies. - Advanced Dynamics
-
In this module we will explore how linear/nonlinear structures vibrate and how we can model them in order to understand and optimise their complex behaviour both analytically and numerically. We will uncover the behaviour of theoretical nonlinear models and we will explore and evaluate the fascinating world of advanced dynamics, random vibration, nonlinear systems and chaos through lectures and dedicated reading. We link advanced engineering with concepts from physics and maths that are of core importance in the new era of engineering, considering structures from light aerospace structures to offshore wind turbines and space shuttles. Furthermore, we will discover the world of Hamiltonian mechanics by capturing its fundamental physics. The learning will be supported by dedicated tutorial sessions.
15 credits - Advanced Engineering Fluid Dynamics
-
The module introduces advanced subjects in fluid mechanics and focuses on the theory and applications of the fundamental physical laws governing fluid flows. The Navier-Stokes and the continuity equations are revisited and the energy and the general Scalar Transport Equations for fluid flows will be derived. Creeping flows, laminar/turbulent boundary layer flows, shock and expansion waves, drag rise and supersonic aerofoils, etc. will be discussed. A key skill developed is problem solving in the area of advanced fluid mechanics through how equations, models and boundary conditions may be adapted and simplified to describe a wide variety of engineering fluid flows.
15 credits - Advanced Materials Manufacturing
-
This unit introduces key concepts with regards to Materials 4.0, the fourth industrial revolution. Modelling and simulation is a key enabling technology within Aerospace Technology Institute's strategy to reach zero carbon emissions by 2050. Modelling allows for the rapid insertion of new materials and manufacturing processes, in addition to the improved understanding and optimisation of current methods. The course includes key drivers in reaching zero carbon emissions, covering lithium battery manufacturing and coating technologies.
15 credits
This unit aims to provide knowledge and experience of advanced manufacturing techniques that will underpin the UK's future advanced materials manufacturing base and obtain knowledge and experience of advanced manufacturing process and material modelling to solve industrial problems.
- Advanced Space Systems and Space Weather
-
The module provides you with an understanding of the concept advanced space systems, within the context of space weather and processes in the geo-space that can have hazardous effects on modern ground based and space based technological systems. It covers knowledge about susceptibility of services such as power supply, communications, transportation and navigation to space weather events, and introduces methodologies for space weather forecast based on systems engineering approaches from first principles. The module also provides knowledge of the requirements for transferring forecasting models into operational tools for space weather forecasting, before covering how space weather forecasting can assist in mitigating adverse effects of space weather.
15 credits - Aviation Safety and Aeroelasticity
-
This module covers the area of engineering related to aeroelasticity and safety by means of analytical techniques and study cases. The students will develop a fundamental knowledge of aeroelasticity and its implications for aircraft design and operation and evaluate aircraft loading; be able to analyse different manoeuvres using heave/pitch aircraft models; and be able to calculate internal loads in different manoeuvres. The course will provide students with an understanding of aeroelastic phenomena including flutter and divergence. This course provides the methodology and techniques for prediction/detection of a number of aeroelastic effects.
15 credits - Design and Manufacture of Composites
-
This module is designed to provide you with an understanding of both the design and manufacture of polymer composites and is presented in two sections. First, design of composites is taught via tutorials and practicals on classical laminate theory and ESAComp software. An extended series of worked examples provides you with the basic tools you need to design effective composite parts. Second, manufacture of composites is taught via lectures. You will learn multiple routes for making composite parts alongside practical issues such as defects, machining/joints, failure, testing and non destructive testing, repair and SMART composites.
15 credits - Electronic Communication Technologies
-
This module aims to provide you with a range of skills that are required when designing circuits and systems at high frequencies. Topics covered will include: electromagnetic interference mechanisms, circuit design techniques, filtering, screening, transmission lines, S-parameters, Smith charts, equivalent circuits for passive and active devices, radio frequency (RF) amplifier design, noise performance and nonlinearities of RF circuits and systems.
15 credits - Industrial Applications of Finite Element Analysis
-
The module aims to provide students with a thorough understanding of the principles of finite element modelling and its application to solve industrial engineering problems. A set of industry-relevant problems will be provided to students along with experimental results for model validation. Students will be allocated one of their preferred projects and will have to devise a modelling strategy to solve their particular problem. Knowledge will be drawn from lectures introducing the theory behind finite element modelling of dynamic problems for modal and transient analyses, non-linear problems including contact, material behaviour and large deformation as well as fracture.
15 credits - Industrial training programme (ITP) in Avionics
-
This unit will provide an insight into the avionics, data processing and autonomous systems. This will be collaboration with GE Aviation Systems (Cheltenham). GE Aviation Systems will set a real technical challenge and small group sizes will undertake experimental work and present a report that will require an in-depth literature review. To supplement the main technical challenge there will be focussed technical seminars on relevant topics. These topics will be provided by both academics and industry engineers. In addition, GE Aviation will provide seminars on employability skills, data handling, quality and safety in the aerospace materials sector.
15 credits - Mobile Robotics and Autonomous Systems
-
Robotics and autonomous systems are having an increasing impact on society and the way we live. From advanced manufacturing and surgical robots to unmanned aerial systems and driverless cars, this exciting area is presenting increasing technological challenges. This module provides you with the advanced knowledge and understanding to apply control and systems engineering concepts to the closely related disciplines of robotics and autonomous systems. The module covers theoretical and technical analysis, and design aspects of mobile and manipulator robots with reference to their applications. The module further covers advanced techniques in autonomous decision making for robots and autonomous vehicles.
15 credits - Motion Control and Servo Drives
-
This module investigates, in detail, the performance and operational characteristic of both modern a.c. and d.c. variable speed drives and actuation systems, as well as their applications in electric/hybrid vehicle traction.
15 credits - Multisensor and Decision Systems
-
The ability to use data and information from multiple sources and make informed decisions based on that data is key to many applications, e.g. manufacturing, aerospace, robotics, finance and healthcare. Through effective use of multisensory data and decision making we can reduce uncertainty, improve robustness and reliability, enhance efficiency and ultimately improve the performance of systems. In this module you will develop an in depth knowledge and understanding of multisensor and decision systems and the underlying mathematics and algorithms. You will develop your confidence in solving complex problems requiring the application of multisensory and decision techniques to a wide variety of applications.
15 credits - Real-Time Embedded Systems
-
Many systems, for example; a control system, fault detection system or health monitoring system are required to work in real-time. Such systems can be developed and implemented using a CPU and external devices in an embedded system application/device to perform the desired tasks in the "real" world. This module covers the hardware associated with building an embedded system and how the desired functionality and thus real-time operation of an embedded system can be realised through software/hardware.
15 credits - Testing and verification in safety-critical systems
-
This module provides an introduction to the processes and problems of building complex software such as for use in aerospace applications. Topics covered can be split into four major groups: safety, specification languages, concepts of software engineering, different methods of software testing. A substantial amount of time will be spent on the ideas of software testing and specific testing techniques.
15 credits
1. Safety includes software and systems safety, methods of performing hazard analysis, human factors and the IEC 61508 standard.
2. Specification languages such as Statecharts.
3. Software engineering concepts focus on the software lifecycle, safe language subsets, software testing and maintenance.
4. The software testing part is concerned with advanced approaches to generating software tests.Students should be aware that there are limited places available on this course.
The content of our courses is reviewed annually to make sure it's up-to-date and relevant. Individual modules are occasionally updated or withdrawn. This is in response to discoveries through our world-leading research; funding changes; professional accreditation requirements; student or employer feedback; outcomes of reviews; and variations in staff or student numbers. In the event of any change we'll consult and inform students in good time and take reasonable steps to minimise disruption. We are no longer offering unrestricted module choice. If your course included unrestricted modules, your department will provide a list of modules from their own and other subject areas that you can choose from.
Learning and assessment
Learning
The following are the main learning and teaching methods implemented within the programme:
- lectures
- tutorials
- practical activities
- coursework assignments (including oral, video and poster presentations)
- individual investigative project (final year)
- design projects
- online resources
Assessment
Students are assessed via a mix of the following:
- examinations
- coursework assignments
- lab work
- online tests
- reports
- group projects
- presentations
- design projects
- dissertations
Programme specification
This tells you the aims and learning outcomes of this course and how these will be achieved and assessed.
Entry requirements
With Access Sheffield, you could qualify for additional consideration or an alternative offer - find out if you're eligible.
The A Level entry requirements for this course are:
AAA
including Maths and a science
A Levels + additional qualifications AAB, including Maths and a science + A in a relevant EPQ; AAB, including Maths and a science + A in AS or B in A Level Further Maths
International Baccalaureate 36, with 6 in Higher Level Maths and a science
BTEC Extended Diploma DDD in Engineering or Applied Science + A in A Level Maths
BTEC Diploma DD in Engineering or Applied Science + A in A Level Maths
Scottish Highers + 2 Advanced Highers AAAAB + AA in Maths and a science
Welsh Baccalaureate + 2 A Levels A + AA in Maths and a science
Access to HE Diploma Award of Access to HE Diploma in a relevant subject, with 45 credits at Level 3, including 39 at Distinction (to include 15 Maths and 15 science units), and 6 at Merit + A in A Level Maths
Other requirements-
Science subjects include Physics, Chemistry, Biology (or Human Biology), Further Maths or Statistics
The A Level entry requirements for this course are:
AAB
including Maths and a science
A Levels + additional qualifications AAB, including Maths and a science + A in a relevant EPQ; AAB, including Maths and a science + A in AS or B in A Level Further Maths
International Baccalaureate 34, with 6, 5 in Higher Level Maths and a science
BTEC Extended Diploma DDD in Engineering or Applied Science + B in A Level Maths
BTEC Diploma DD in Engineering or Applied Science + B in A Level Maths
Scottish Highers + 2 Advanced Highers AAABB + AB in Maths and a science
Welsh Baccalaureate + 2 A Levels B + AA in Maths and a science
Access to HE Diploma Award of Access to HE Diploma in a relevant subject, with 45 credits at Level 3, including 36 at Distinction (to include 15 Maths and 15 science units), and 9 at Merit + A in A Level Maths
Other requirements-
Science subjects include Physics, Chemistry, Biology (or Human Biology), Further Maths or Statistics
You must demonstrate that your English is good enough for you to successfully complete your course. For this course we require: GCSE English Language at grade 4/C; IELTS grade of 6.5 with a minimum of 6.0 in each component; or an alternative acceptable English language qualification
Equivalent English language qualifications
Visa and immigration requirements
Other qualifications | UK and EU/international
If you have any questions about entry requirements, please contact the department.
Aerospace Engineering
We work with the biggest names in industry to shape the future of aerospace engineering. We have strong partnerships with the likes of Airbus UK, BAE Systems, Boeing, EADS, Qinetiq and Rolls-Royce. Our work with them will introduce you to developments and techniques that are still new to industry. You'll gain both breadth and depth of engineering knowledge, as well as the transferable skills employers demand.
Like the industry, Aerospace Engineering at Sheffield is interdisciplinary. You'll be taught by experts in aerospace materials, aerodynamics, flight control systems, avionics, aircraft design, aero propulsion, management and applied mathematics. Our unique approach will give you the competitive advantage when you graduate.
Our courses will give you both academic knowledge and practical experience. Analyse flight performance and stability on our unique flying day, solve real-world engineering problems on the Global Engineering Challenge, or design, build and fly your own unmanned air vehicle as part of the MEng group design project.
The Diamond features some of the best engineering teaching spaces in the UK. You'll be taught in state-of-the art teaching and lab facilities, using cutting edge, industry standard equipment.
Facilities
The Diamond features some of the best engineering teaching spaces in the UK. You’ll be taught in state-of-the-art teaching and lab facilities, using industry standard equipment. We have four Merlin static flight simulators for aircraft design and six X-Plane based flight simulators for flight control and navigation purposes. There are seven commercial drones with a netted area for flight testing and to learn basic flying skills. We also have a Turbine Solutions jet engine test bench, along with 20 associated jet engines to take apart and analyse. You’ll get to use these facilities throughout your course.
Why choose Sheffield?
The University of Sheffield
A top 100 university
QS World University Rankings 2023
92 per cent of our research is rated as world-leading or internationally excellent
Research Excellence Framework 2021
Top 50 in the most international universities rankings
Times Higher Education World University Rankings 2022
No 1 Students' Union in the UK
Whatuni Student Choice Awards 2022, 2020, 2019, 2018, 2017
A top 10 university targeted by employers
The Graduate Market in 2022, High Fliers report
Aerospace Engineering
National Student Survey 2022
National Student Survey 2022
Graduate careers
Aerospace Engineering
Our graduates are in demand internationally and go onto success in some of the world's leading engineering companies. They work in aerospace design, aviation, transport, manufacturing, finance, energy and power, and the armed forces. Employers include Airbus, BAE Systems, BP, Ernst & Young, Jaguar Land Rover, Ministry of Defence, Nissan, Rolls-Royce, PwC, Royal Air Force and Shell. Some students continue onto further study or research.
There's a focus on employability throughout your studies and you'll get all the support you need to help you achieve your career aspirations.
Flying experience
You can gain flying experience either through our Private Pilot Instruction courses or through our links with the Yorkshire Universities Air Squadron, provided you fulfil the appropriate medical requirements.
Fees and funding
Fees
Additional costs
The annual fee for your course includes a number of items in addition to your tuition. If an item or activity is classed as a compulsory element for your course, it will normally be included in your tuition fee. There are also other costs which you may need to consider.
Funding your study
Depending on your circumstances, you may qualify for a bursary, scholarship or loan to help fund your study and enhance your learning experience.
Use our Student Funding Calculator to work out what you’re eligible for.
Visit us
University open days
We host five open days each year, usually in June, July, September, October and November. You can talk to staff and students, tour the campus and see inside the accommodation.
Subject tasters
If you’re considering your post-16 options, our interactive subject tasters are for you. There are a wide range of subjects to choose from and you can attend sessions online or on campus.
Offer holder days
If you've received an offer to study with us, we'll invite you to one of our offer holder days, which take place between February and April. These open days have a strong department focus and give you the chance to really explore student life here, even if you've visited us before.
Campus tours
Our weekly guided tours show you what Sheffield has to offer - both on campus and beyond. You can extend your visit with tours of our city, accommodation or sport facilities.
Apply for this course
This course is no longer taking applications for 2023-2024 entry. Find another undergraduate course.Contact us
Telephone: +44 114 222 7837
Email: aerospace-admissions@sheffield.ac.uk
The awarding body for this course is the University of Sheffield.
Recognition of professional qualifications: from 1 January 2021, in order to have any UK professional qualifications recognised for work in an EU country across a number of regulated and other professions you need to apply to the host country for recognition. Read information from the UK government and the EU Regulated Professions Database.
Any supervisors and research areas listed are indicative and may change before the start of the course.